|
12-21-2008, 01:14 PM | #1 |
Junior Member
Join Date: Sep 2003
Location: yreka, ca
Posts: 270
|
63 door latch?
So, I've been fighting the driver side door latch in the Wife's '63 for years now. I've replaced the latch a few times, had body shops try to adjust it, and it still won't latch unless it's slammed hard. My friend at the body shop says I need a new striker as well as a new latch. I'm waiting for a backorderd latch and no one seems to make the striker. I figure any I find will be a 45 year old POS like I already have. So, I'm thinking about the bear claw latches they use in street rods. Anyone using them? How hard are they to install?
__________________
63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10 |
12-21-2008, 05:51 PM | #2 |
1961 crewcab
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
|
Re: 63 door latch?
I had a bunch of the same issues with mine, and then I re-adjusted the door hinges, and now it works perfect, your hinges could have sagged, or come out of adjustment over the years...
|
12-21-2008, 08:18 PM | #3 | |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: 63 door latch?
Quote:
adjusted the door via hinges, now it's like butter! can't wait for new rubber, ought to be sweet then....
__________________
CHEVY ONLY |
|
12-21-2008, 07:56 PM | #4 |
Roadside Rebuilder
Join Date: Oct 2008
Location: Southeast Portland, OR
Posts: 421
|
Re: 63 door latch?
Bought a frontend off a guy last week, and he had bear-claws on his
'50 Panel project. Looked like they worked great. |
12-21-2008, 08:42 PM | #5 |
Junior Member
Join Date: Sep 2003
Location: yreka, ca
Posts: 270
|
Re: 63 door latch?
I'll talk to my body shop guy to see if he tried adjusting the hinges. The hinges themselves seem to be tight no looseness or sagging.
__________________
63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10 |
08-02-2009, 07:22 PM | #6 |
Junior Member
Join Date: Sep 2003
Location: yreka, ca
Posts: 270
|
Re: 63 door latch?
Well, the latch that I waited months to get lasted a few weeks and bent and became useless. So I put the old repop that was in it back in. Any ideas? My body shop guy thinks the bear claws might be a pain to fab up.
__________________
63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10 |
08-23-2009, 09:28 AM | #7 |
Junior Member
Join Date: Sep 2003
Location: yreka, ca
Posts: 270
|
Re: 63 door latch?
I see LMC is repoping the strikers for the '63 now. I think I'll try a new latch new striker combo and see if that works. Here goes nothin'.
__________________
63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10 |
08-23-2009, 11:14 PM | #8 |
Registered User
Join Date: Sep 2006
Location: Las Vegas, NV
Posts: 169
|
Re: 63 door latch?
Let me know how that works out for you, I have the same prob on my 63.
|
08-24-2009, 12:46 AM | #9 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 63 door latch?
The '60-'63's have a wedge shaped block on the door down below the striker and latch. Has that been adjusted as well? Sometimes they rub pretty hard in the B-pillar.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
Bookmarks |
|
|