Possible Bed Swap: Long Fleet to Long Step.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

64c20crewcab · 12-25-2008, 03:25 PM

Hey Guys,

I found a local guy with a 46-66 Chevy (not GMC) longbed stepside parts truck. The bed is complete with wood and all. It may need the back panel replaced but in overall good condition. The price aint bad either!

How rare are these beds on Chevys? Anybody here have pic's of a longbed stepside truck?

Thanks!

jonzcustomshop · 12-25-2008, 06:26 PM

They are actually more common on 60-62 than the later ones I think
here are some shots:

100%Chevy · 12-25-2008, 09:33 PM

I have one down at the shop(parts truck).I think it's a 64.
In case ya"ll don't know it,the fender that carries the spare is not the same as the shortbed fenders!Neither is the spare hanger!They are very similar in appearance.
The frame is the same as the longfleet.
Mike.

Rogue · 12-25-2008, 09:55 PM

Quote:

Originally Posted by 100%Chevy

In case ya"ll don't know it,the fender that carries the spare is not the same as the shortbed fenders!

Really? What is different? Longer?

There was an old boy in my town that had an original ShortStep with OEM spares on both sides.

100%Chevy · 12-26-2008, 12:17 AM

The hole in the fender where the support rod goes is in a different spot.
And the support rods themselves are at a different angle where they bolt to the bedsides.
We tried to put the longbed fender on a shortbed in the shop and the spare brackets wouldn't line-up.
Mike.

64c20crewcab · 12-26-2008, 12:39 AM

Thanks guys! The tan GMC is the look I like! I've seen this pic around for some time. The blue truck is sweet!

The fenders on the bed I've seen are full - no indent for the spares. There are holes in the passenger beside for the spare tire mount.

Some junk in the bed so the mount may be there. Will give a call to the parts truck owner tomorrow.

Here are a few pics.. Also anyone have the spare tire mount or pic of one?

jonzcustomshop · 12-26-2008, 06:00 PM

her is a shot I have ,dosen't show the bracket though:

64c20crewcab · 12-26-2008, 06:54 PM

Quote:

Originally Posted by jonzcustomshop

her is a shot I have ,dosen't show the bracket though:

Thanks. I just need to see what it may look like so that can fab one up. Cant be that difficult to make one.

May go get the bed tomorow.

Thanks again!
Norm

jonzcustomshop · 12-27-2008, 06:22 AM

I almost wonder if what was used was a fleetside bed mount spare tire bracket, looks like the same 2 holes are in the side of your bed... although having the tire sit on the step kind of defeats the use of the step.
we had a 55 once with a 10 foot bed, the spares were still mounted up high on the stepside bracket, they just didn't sit in the fender because the bed was so long.

12-25-2008, 03:25 PM	#1
64c20crewcab Registered User Join Date: Jun 2008 Location: North SD County Posts: 631	Possible Bed Swap: Long Fleet to Long Step.. Hey Guys, I found a local guy with a 46-66 Chevy (not GMC) longbed stepside parts truck. The bed is complete with wood and all. It may need the back panel replaced but in overall good condition. The price aint bad either! How rare are these beds on Chevys? Anybody here have pic's of a longbed stepside truck? Thanks! __________________ ..............................._________ ......___________//___[[___{\ _____ ...../__(_(O)_)___/____/____/_(O)_/ 1964 C20 Long Stepside 3 Door Crew Cab - Armbruster-Stageway Conversion Y2K INDN Chief "ONE OF A KIND, NOT ONE OF THE CROWD" Aug 2010 - Front end frame cleanup & engine swap done!!! June 2011 - Rear end bagged Sept 2011 - Rebuild motor top end Sept 2012 - Parked and slowly working on it. Aug 2013 - Front end bagged - finally! Aug 2014 - Stepside swap conversion done. Finally ready to start bodywork! Have a few KEWL ideas... Here is my build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=335427

12-25-2008, 06:26 PM	#2
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Possible Bed Swap: Long Fleet to Long Step.. They are actually more common on 60-62 than the later ones I think here are some shots: Attached Images

12-25-2008, 09:33 PM	#3
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: Possible Bed Swap: Long Fleet to Long Step.. I have one down at the shop(parts truck).I think it's a 64. In case ya"ll don't know it,the fender that carries the spare is not the same as the shortbed fenders!Neither is the spare hanger!They are very similar in appearance. The frame is the same as the longfleet. Mike.

12-26-2008, 12:17 AM	#5
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: Possible Bed Swap: Long Fleet to Long Step.. The hole in the fender where the support rod goes is in a different spot. And the support rods themselves are at a different angle where they bolt to the bedsides. We tried to put the longbed fender on a shortbed in the shop and the spare brackets wouldn't line-up. Mike.

12-26-2008, 12:39 AM	#6
64c20crewcab Registered User Join Date: Jun 2008 Location: North SD County Posts: 631	Re: Possible Bed Swap: Long Fleet to Long Step.. Thanks guys! The tan GMC is the look I like! I've seen this pic around for some time. The blue truck is sweet! The fenders on the bed I've seen are full - no indent for the spares. There are holes in the passenger beside for the spare tire mount. Some junk in the bed so the mount may be there. Will give a call to the parts truck owner tomorrow. Here are a few pics.. Also anyone have the spare tire mount or pic of one? Attached Images __________________ ..............................._________ ......___________//___[[___{\ _____ ...../__(_(O)_)___/____/____/_(O)_/ 1964 C20 Long Stepside 3 Door Crew Cab - Armbruster-Stageway Conversion Y2K INDN Chief "ONE OF A KIND, NOT ONE OF THE CROWD" Aug 2010 - Front end frame cleanup & engine swap done!!! June 2011 - Rear end bagged Sept 2011 - Rebuild motor top end Sept 2012 - Parked and slowly working on it. Aug 2013 - Front end bagged - finally! Aug 2014 - Stepside swap conversion done. Finally ready to start bodywork! Have a few KEWL ideas... Here is my build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=335427

12-26-2008, 06:00 PM	#7
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Possible Bed Swap: Long Fleet to Long Step.. her is a shot I have ,dosen't show the bracket though: Attached Images

12-27-2008, 06:22 AM	#9
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Possible Bed Swap: Long Fleet to Long Step.. I almost wonder if what was used was a fleetside bed mount spare tire bracket, looks like the same 2 holes are in the side of your bed... although having the tire sit on the step kind of defeats the use of the step. we had a 55 once with a 10 foot bed, the spares were still mounted up high on the stepside bracket, they just didn't sit in the fender because the bed was so long. Attached Images Last edited by jonzcustomshop; 12-27-2008 at 06:33 AM. Reason: added pics of brackets



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.