|
02-07-2009, 07:47 AM | #1 |
2WD 4 Life
Join Date: Oct 2008
Location: Coon Rapids, MN
Posts: 169
|
Can-O-Worms
My grandpa says im good with fixin anything with 4 wheels and a motor.. but he thinks im best at opening cans of worms...
Wel the weather today allowed me to crack open my first can for '09. I wasnt going to work on the truck until next weekend when i have a really really big pile of parts to put in, but my truck ask crying for attention... or atleast the frame was.... Oh and the pictures arent the greatest since I forgot to grab the camera and had to use my phones camera. This is after unbolted the steering box from the frame and just truning the wheels to swing the steering box out of the way. Crack is bad for you health... Cleaned up and welding started It was a dirty job and I forgot to take more pictures or even a final picture... NOW the truck has nice and tight steering with no binding or lack of turning radius due to the frame being completly broken thru. For the "can of worms" I opened fixing the frame... upon disconnecting my already leaky power steering lines, I wasnt paying too much attention to the fact that I twisted and broke the steel part of the line... also I managed to slip with a pry bar cutting the power steering belt... SO now I have nice tight steering but you have to be Hulk Hogan to turn the wheel since the lines are capped off on the steering box and the pump isnt running off the motor currently. i get to drive it like this til Friday the 13th thanks to me bringing home a new toy and blowing most of my pay check lol its a '99 Yamaha R-1 if anyone is wondering. Thanks for reading!
__________________
Big D 1969 c10 1960 cadillac 1978 king cobra |
02-07-2009, 08:03 AM | #2 |
Old Heap Driver
Join Date: Mar 2008
Location: Newport News, Va
Posts: 2,642
|
Re: Can-O-Worms
Sorry, couldn't help myself. LOL.
__________________
_____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver. |
02-07-2009, 05:40 PM | #3 |
2WD 4 Life
Join Date: Oct 2008
Location: Coon Rapids, MN
Posts: 169
|
Re: Can-O-Worms
lol nice i figured someone would post a picture like that
__________________
Big D 1969 c10 1960 cadillac 1978 king cobra |
02-07-2009, 05:50 PM | #4 |
In the Forgotten far North.
Join Date: Jul 2007
Location: Anchorage, Alaska
Posts: 2,627
|
Re: Can-O-Worms
Yep Power steering courtesy of ARMSTRONG STEERING INCORPORATED!!!
__________________
1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade |
02-07-2009, 05:57 PM | #5 |
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: Can-O-Worms
I hope that bike has studded tires.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
02-07-2009, 08:42 PM | #6 |
Senior Member
Join Date: Aug 2004
Location: Everett, WA
Posts: 2,316
|
Re: Can-O-Worms
There are a few companies making reinforcement plates for that frame area. Since it has already broken once you might want to get one on there.
PS, I have never seen one that bad!
__________________
2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold) |
02-08-2009, 02:29 AM | #7 |
It'd be alot cooler if you did
Join Date: May 2003
Location: Three Rivers, MI
Posts: 2,345
|
Re: Can-O-Worms
x2. It will just end up cracking along the same lines again if you don't do something to reinforce it. A 3/8" thick piece of plate steel comes to mind. I've never seen one that bad either.
|
02-08-2009, 09:02 AM | #8 | |
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: Can-O-Worms
Common as dirt.....but that is an exceptionally bad case.
__________________
You can review the site's rules here. Quote:
Bad planning on your part does not necessarily constitute an instant emergency on my part.... The great thing about being a pessimist is that you are either pleasantly surprised or right. |
|
02-08-2009, 01:41 PM | #9 |
Senior Member
Join Date: Aug 2004
Location: Everett, WA
Posts: 2,316
|
Re: Can-O-Worms
I have only ever seen one cracked/broken in real life; an '84 K5 diesel. Not that it being a diesel had anything to do with it. The steering box was completely detached from the fame.
I have parted a few trucks, owned quite a few trucks too. But in all the parted trucks I have never removed the steering box so maybe they were cracked and I just never saw it?
__________________
2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold) |
02-07-2009, 08:45 PM | #10 |
Spear and magic helmet!
Join Date: Oct 2006
Location: Nashville, TN
Posts: 1,226
|
Re: Can-O-Worms
I totally thought the broken frame was the can of worms.
__________________
-- Will |
02-08-2009, 09:08 AM | #11 |
2WD 4 Life
Join Date: Oct 2008
Location: Coon Rapids, MN
Posts: 169
|
Re: Can-O-Worms
I dont have pictures to show it but it is reinforced with some pretty thick steel plates. the crack was really bad but i also had it pulled a part some to get my air grinder in there to clean it up. imo all the plates out there to "fix" the cracking problem are over priced and wont stop the cracking unless its welded in solid...
__________________
Big D 1969 c10 1960 cadillac 1978 king cobra |
02-08-2009, 01:42 PM | #12 |
Senior Member
Join Date: Aug 2004
Location: Everett, WA
Posts: 2,316
|
Re: Can-O-Worms
Agree on both points.
__________________
2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold) |
Bookmarks |
|
|