possible problems with 305 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

messed up c-10 · 12-10-2002, 11:32 PM

My truck has been misfiring lately hopefully it is only the plug but it could be a bent rod. I took a pic of a hose towards the back passenger side of the engine. It looks like it melted but I cant get in to feel if there are wires in there. Hopefully this has nothing to do with the timing and wont cause any problems.

ocbaud · 12-11-2002, 12:20 AM

its wire loom.

i got it on my truck and with it being so old, it is VERY brittle, so if anything even touches it, it will crumble.

messed up c-10 · 12-11-2002, 12:31 AM

yeah. I just hope whatever is in that loom isnt messed up. I need to buy some better headers because mine suck. I've found another leak in them.

When I get my new engine I'll buy some better quality headers too.

Hooter · 12-12-2002, 01:00 AM

If its missfirin it could be that you melted the pwr wire going to your Hei dizzy

SWINGSAX68 · 12-13-2002, 08:15 PM

I would definatly see if you could find room and see if you can check it all out and replace wires if you need to.

SWINGSAX68 · 12-13-2002, 08:23 PM

P.S.
Just be sure to get to the problem before major problems occur. Burnt stuff sucks.

12-10-2002, 11:32 PM	#1
messed up c-10 RHCP afficianado Join Date: Oct 2002 Location: McLoud, OK Posts: 789	possible problems with 305 My truck has been misfiring lately hopefully it is only the plug but it could be a bent rod. I took a pic of a hose towards the back passenger side of the engine. It looks like it melted but I cant get in to feel if there are wires in there. Hopefully this has nothing to do with the timing and wont cause any problems. Attached Images __________________ ~Ryan~ 89 S-10 Blazer with a 4.3L 96 Ford Crown Vic P71 4.6L V8. This car rocks. Here are some links to some good music. Jack Johnson Donavon Frankenreiter

12-11-2002, 12:31 AM	#3
messed up c-10 RHCP afficianado Join Date: Oct 2002 Location: McLoud, OK Posts: 789	yeah. I just hope whatever is in that loom isnt messed up. I need to buy some better headers because mine suck. I've found another leak in them. When I get my new engine I'll buy some better quality headers too. __________________ ~Ryan~ 89 S-10 Blazer with a 4.3L 96 Ford Crown Vic P71 4.6L V8. This car rocks. Here are some links to some good music. Jack Johnson Donavon Frankenreiter

12-12-2002, 01:00 AM	#4
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	If its missfirin it could be that you melted the pwr wire going to your Hei dizzy __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

12-13-2002, 08:15 PM	#5
SWINGSAX68 Now the others dig........ Join Date: May 2002 Location: San Antonio, TX Posts: 1,520	I would definatly see if you could find room and see if you can check it all out and replace wires if you need to. __________________ 68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue *LOOKING FOR A 67 4 DOOR IMPALA!!!Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^#$ and you can fit a body in the trunk of a 67 Impala* MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar TRUCKY LINKS** http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788

12-13-2002, 08:23 PM	#6
SWINGSAX68 Now the others dig........ Join Date: May 2002 Location: San Antonio, TX Posts: 1,520	P.S. Just be sure to get to the problem before major problems occur. Burnt stuff sucks. __________________ 68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue *LOOKING FOR A 67 4 DOOR IMPALA!!!Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^#$ and you can fit a body in the trunk of a 67 Impala* MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar TRUCKY LINKS** http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788

12-11-2002, 12:20 AM	#2
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	its wire loom. i got it on my truck and with it being so old, it is VERY brittle, so if anything even touches it, it will crumble.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.