McGaughys c-notch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SBTork · 02-09-2009, 12:54 PM

I'm looking at buying a mcgaughys 4.5/6" drop for my truck and I am wondering what the c-notch looks like. I've come across three different pictures for it between a few websites, here they are...

PIC 1

PIC 2

PIC 3

I think it's the first one, but I just want to make sure of what it is before I order it.

flamingbig10 · 02-09-2009, 01:57 PM

pic 1

SBTork · 02-09-2009, 03:12 PM

Quote:

Originally Posted by flamingbig10

pic 1

excellent, thanks a lot

**N2TRUX** · 02-09-2009, 03:16 PM

FYI- Pic 3 looks to be 67-72.

S10Fan · 02-09-2009, 07:34 PM

Here's a shot of mine..................

BTW, what are those holes for?

JUST KIDDING!

Picture was taken before the install was finished.

riz · 03-15-2012, 03:02 PM

s10fan - Did you get the 4.5 / 6 Mc Gaughey drop too? I'm looking at that set up myself......... Any issues, tips, comments???

RIZ

S10Fan · 03-15-2012, 03:25 PM

Quote:

Originally Posted by riz

s10fan - Did you get the 4.5 / 6 Mc Gaughey drop too? I'm looking at that set up myself......... Any issues, tips, comments???

RIZ

No, mine is on air

SBTork · 02-10-2009, 02:21 AM

Quote:

Originally Posted by N2TRUX

FYI- Pic 3 looks to be 67-72.

I kinda thought that on first glance. I knew the frame rails of our trucks were straight.

91Subbed · 03-15-2012, 02:31 PM

Are the frame rails different on a c10? Might be a dumb question, just wondering?
Posted via Mobile Device

INSIDIOUS '86 · 03-15-2012, 03:34 PM

We're do you get just the c notch? Summit is only showing a kit for squares. I already have djm flip kit and just need the c notch
Posted via Mobile Device

78-5.3 · 03-15-2012, 04:24 PM

you can always make your own for 1/4 of the money

69BBsuburban · 03-15-2012, 07:53 PM

Quote:

Originally Posted by 78-5.3

you can always make your own for 1/4 of the money

Exactly....

A couple of remnants at the local metal yard and yer in business.....for what....$5-$10?
Same goes for those "flip Kit" thingy's.....

78-5.3 · 03-15-2012, 09:09 PM

Quote:

Originally Posted by 69BBsuburban

Exactly....

A couple of remnants at the local metal yard and yer in business.....for what....$5-$10?
Same goes for those "flip Kit" thingy's.....

i used a thick 5" gas bottle cut it 1/2" wider than the frame then cut it in 1/2 for the 2 halves then i got some metal from the metal yard the same thinkness as the frame shaped it, welded it and in 1 day it was done for around 20 bucks

S10Fan · 03-15-2012, 06:30 PM

Quote:

Originally Posted by INSIDIOUS '86

We're do you get just the c notch? Summit is only showing a kit for squares. I already have djm flip kit and just need the c notch
Posted via Mobile Device

Find just the notch from one of the manufacturers, get the part number, then search the part number at either Summit or Jegs. I bought mine from Stylin Concepts, could have saved money going somewhere else.

INSIDIOUS '86 · 03-15-2012, 04:53 PM

I would but I have neither the tools material or patience. Just gonna buy a bolt in kit and weld it in then weld a backing plate on for support
Posted via Mobile Device

02-09-2009, 12:54 PM	#1
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	McGaughys c-notch I'm looking at buying a mcgaughys 4.5/6" drop for my truck and I am wondering what the c-notch looks like. I've come across three different pictures for it between a few websites, here they are... PIC 1 PIC 2 PIC 3 I think it's the first one, but I just want to make sure of what it is before I order it. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

02-09-2009, 01:57 PM	#2
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: McGaughys c-notch pic 1 __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

02-09-2009, 03:16 PM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: McGaughys c-notch FYI- Pic 3 looks to be 67-72. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-09-2009, 07:34 PM	#5
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: McGaughys c-notch Here's a shot of mine.................. BTW, what are those holes for? JUST KIDDING! Picture was taken before the install was finished. Attached Images __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

03-15-2012, 03:02 PM	#6
riz Registered User Join Date: Oct 2011 Location: hudson,wi Posts: 805	Re: McGaughys c-notch s10fan - Did you get the 4.5 / 6 Mc Gaughey drop too? I'm looking at that set up myself......... Any issues, tips, comments??? RIZ

03-15-2012, 02:31 PM	#9
91Subbed Registered User Join Date: Dec 2011 Location: Arlington Tx Posts: 182	Re: McGaughys c-notch Are the frame rails different on a c10? Might be a dumb question, just wondering? Posted via Mobile Device

03-15-2012, 03:34 PM	#10
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: McGaughys c-notch We're do you get just the c notch? Summit is only showing a kit for squares. I already have djm flip kit and just need the c notch Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

03-15-2012, 04:24 PM	#11
78-5.3 Registered User Join Date: Oct 2009 Location: Waterboro ,MAINE Posts: 547	Re: McGaughys c-notch you can always make your own for 1/4 of the money Attached Images __________________ 78 C-10 5.3 LSX -4L60E

03-15-2012, 04:53 PM	#15
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: McGaughys c-notch I would but I have neither the tools material or patience. Just gonna buy a bolt in kit and weld it in then weld a backing plate on for support Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.