Picture needed PLEASE! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

buster0104 · 02-09-2009, 05:16 PM

I finished the disc brake conversion today. Well almost. I wanted to swap the centerlink also. Everything came off a 71. My question is where do I drill the holes at in the frame? I bolted up everything. Tie rod ends, Hooked up the steering on the drivers side. Then hooked up the tie rods on the passenger side. The arm (don't know what it is called) that bolts up to the frame is way different than my 63. I have seen this swapped over and was told that you had to drill some holes. I hope I have explaned what I need well enough. Any pictures or info will be very helpfull. Thanks Dustin

Joey~AP · 02-09-2009, 05:24 PM

Pitman arm?

buster0104 · 02-09-2009, 05:43 PM

This is what I'm talking about. Not sure what it is called. Please help!
Name: untitled 122.bmp
Views: 152
Size: 71.2 KB

protrash64 · 02-09-2009, 06:02 PM

That is a drag link, I believe.

maximum destruction · 02-09-2009, 06:36 PM

that's an idler arm.

protrash64 · 02-09-2009, 07:00 PM

Quote:

Originally Posted by maximum destruction

that's an idler arm.

yeah, there you go!!!

Alan's Classic · 02-10-2009, 12:16 AM

Quote:

Originally Posted by maximum destruction

that's an idler arm.

I leveled my frame from side to side. I then leveled the center link and measured from crossmember to get it even then clamped the idler and drilled.

02-09-2009, 05:16 PM	#1
buster0104 Registered User Join Date: Feb 2007 Location: louisiana Posts: 31	Picture needed PLEASE! I finished the disc brake conversion today. Well almost. I wanted to swap the centerlink also. Everything came off a 71. My question is where do I drill the holes at in the frame? I bolted up everything. Tie rod ends, Hooked up the steering on the drivers side. Then hooked up the tie rods on the passenger side. The arm (don't know what it is called) that bolts up to the frame is way different than my 63. I have seen this swapped over and was told that you had to drill some holes. I hope I have explaned what I need well enough. Any pictures or info will be very helpfull. Thanks Dustin

02-09-2009, 05:24 PM	#2
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: Picture needed PLEASE! Pitman arm? __________________ Build in progress for son's first truck.

02-09-2009, 05:43 PM	#3
buster0104 Registered User Join Date: Feb 2007 Location: louisiana Posts: 31	Re: Picture needed PLEASE! This is what I'm talking about. Not sure what it is called. Please help!

02-09-2009, 06:02 PM	#4
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Picture needed PLEASE! That is a drag link, I believe. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-09-2009, 06:36 PM	#5
maximum destruction In House Collision Technician Join Date: Aug 2008 Location: cartersville, ga. Posts: 53	Re: Picture needed PLEASE! that's an idler arm. __________________ MAXIMUM DESTRUCTION



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.