|
|
|
02-19-2009, 06:10 PM
|
#1 |
|
Sb 400 club
Join Date: Nov 2005
Location: NH / MA
Posts: 2,746
|
Van bumper????
I was in the yard looking for a front bumper for my 77. They seem to look a whole lot like the late 80's early 90's gmc conversion van bumpers. are they intact the same?
http://www.discountautosalesnj.com/e...g-20b/main.JPG
__________________
 1984 chevy c10, built 400sb,.(SOLD )77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed  1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out |
|
|
|
02-24-2009, 08:10 PM
|
#2 |
|
Sb 400 club
Join Date: Nov 2005
Location: NH / MA
Posts: 2,746
|
Re: Van bumper????
Has anybody tried this swap? Still trying to figure out if this bumper is infact the same.
__________________
1984 chevy c10, built 400sb,.(SOLD)77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out |
|
|
|
|
02-24-2009, 08:14 PM
|
#3 |
|
Account Suspended
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
|
Re: Van bumper????
It won't directly bolt on. the framerails on pickups and vans is different. the vans framerails are a good bit farther apart than a trucks so all the bolt holes will be wrong, even the outer ones that attach to the braces. otherwise the shape/size is the same. you can use bumperguards from a van though on a same style pickup bumper
|
|
|
|
|
02-25-2009, 02:20 AM
|
#4 |
|
Registered User
Join Date: Dec 2005
Location: canada
Posts: 166
|
Re: Van bumper????
Are any parts of a van usable?? I have a 1984 van I picked up for the cost of towing. I am going to pull the motor but wondered about the control arms and the rear end? Anything usable on my 1980 short truck??
Thanks
__________________
'70 Malibu with 383 stroker/T350 '56 SWB Mercury pickup..under construction '67 Firebird Convertible...all done stock '70 LWB 350 on propane...beater '69 LWB 350/T400 body restored |
|
|
|
|
02-25-2009, 10:11 AM
|
#5 |
|
Registered User
Join Date: Oct 2006
Location: In the Indiana Corn
Posts: 449
|
Re: Van bumper????
According to Hollander, the spindle/knuckle and the upper control arm from the van is a direct swap to the truck, but the lower control arm and the rear axle are not.
Hollander also says the coil springs (but not the leaf springs), as well as the rotors, calipers and mounting brackets all will work.
__________________
1988 R2500 Crew Cab Immediate plans- get it running! Future plans- Rear disc swap & Hydroboost Dually conversion with shackle flip-n-switch 4x4 conversion with 52" springs Maybe some new body panels  Who needs a car when they make crew cab trucks? |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
