C20 to C10 suspension conversion ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

201260mark · 03-07-2009, 02:30 AM

Hello I am new hear but just trying to start on a truck that I have had while. The truck it self is 1968 C20 LWB . My question is has any one used the spindles that EarlyClassic Enterprise sales that lets you keep all the C20 components in the front ? any help would be greatly appriciated
Thanks

Spray-Bomb · 03-07-2009, 11:06 AM

I cant help you with the spindles, but why are you wanting to keep the C/20 parts up front ???

You are wanting to go C/10 correct ???

Unless you have like all new ball joints & tie rod ends or something I see no reason to keep the C/20 parts & buy a funky spindle to keep them IMO

duceducenine · 03-07-2009, 01:06 PM

i've use them on my 77 and 84 crewcab 3/4 tons
worked great on both them bolt right on with all
ball joints etc......converted to 5 on 5 pattern
this is the pic before i made it a shortbed
ECE know their stuff and very helpful

03-07-2009, 02:30 AM	#1
201260mark Registered User Join Date: Jan 2008 Location: Houston,Tx Posts: 17	C20 to C10 suspension conversion ? Hello I am new hear but just trying to start on a truck that I have had while. The truck it self is 1968 C20 LWB . My question is has any one used the spindles that EarlyClassic Enterprise sales that lets you keep all the C20 components in the front ? any help would be greatly appriciated Thanks

03-07-2009, 11:06 AM	#2
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: C20 to C10 suspension conversion ? I cant help you with the spindles, but why are you wanting to keep the C/20 parts up front ??? You are wanting to go C/10 correct ??? Unless you have like all new ball joints & tie rod ends or something I see no reason to keep the C/20 parts & buy a funky spindle to keep them IMO __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 03-07-2009 at 11:07 AM.

03-07-2009, 01:06 PM	#3
duceducenine Registered User Join Date: Nov 2006 Location: el sobrante CA 94803 Posts: 284	Re: C20 to C10 suspension conversion ? i've use them on my 77 and 84 crewcab 3/4 tons worked great on both them bolt right on with all ball joints etc......converted to 5 on 5 pattern this is the pic before i made it a shortbed ECE know their stuff and very helpful Last edited by duceducenine; 12-31-2010 at 01:43 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.