ok so i want to be cheap

[edflores]

I think i have probably asked this a few times, but how do i remove the bushings on a 4 link without destroying them?
I have heard torch them but that is not an option.

My pile of parts is hitting the powdercoaters next week, but i do not want to buy new bushings for a 4 link that has never seen the road. I figure 8x10each, i can something else for my truck.

[m6z]

Originally Posted by edflores

I think i have probably asked this a few times, but how do i remove the bushings on a 4 link without destroying them?
I have heard torch them but that is not an option.

My pile of parts is hitting the powdercoaters next week, but i do not want to buy new bushings for a 4 link that has never seen the road. I figure 8x10each, i can something else for my truck.

You should be able to just hammer or press them out. It shouldn't be to much of a pain. just us a socket thats the size of the metal sleeve and set the end on top of a vise. Then tap out the sleeve with the socket and hammer. The bushings should then come out eaisly.

Did that make any sense?

[stllookn]

Makes sense to me...but then I have done that more than a couple of times!!!!