|
|
|
01-01-2003, 09:26 PM
|
#1 |
|
Semper Fidelis
Join Date: Dec 2001
Location: Cedar City, Utah
Posts: 654
|
gas tank Question
Well, I just drove my new 72 GMC today. I wasn't getting gas to the carb so I went backwards and found out the metal intake tube in the tank was full of crap about an inch into the tube. Shouldn't there be a "sock" or strainer on the tube? The truck hadn't been started in 5 years and the gas smelled like varnish. I put in 15 gallons of fresh gas and cleaned out the tube. I drove it about ten miles and it ran well. Will I have more problems with the crummy gas in the bottom of the tank? Any advice would be great.
__________________
72 Chevy C 20 with 402 For sale 85 GMC K2500  83 Trans Am Cedar City, Utah (Missouri Native) |
|
|
|
01-01-2003, 09:32 PM
|
#2 |
|
Registered User
Join Date: Jan 2003
Location: minden
Posts: 358
|
i would pull the tank out and drain it out as they are not hard to remove and then i would drain the gas line and change the filter on the carb
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
