low buck build project yellow fever - The 1947 - Present Chevrolet & GMC Truck Message Board Network

plugs · 06-25-2009, 11:15 PM

here is my 83 sw i bought for 300 and am starting to rebuild it http://i221.photobucket.com/albums/d...Picture046.jpg

plugs · 06-25-2009, 11:25 PM

and a couple of the tear down

flamingbig10 · 06-26-2009, 12:17 AM

whats your plans for it

plugs · 06-26-2009, 12:55 AM

plans are for a 4inch lowering kit, new black interior,18 inch front 20 inch rear wheels. front and rear roll pans, phantom grill, 66 fuelie vette hood scoops. black top of cab and bed rails and a custom yellow pearl tri coat bottom. and a air brushed grapic at the break line of the paint that looks like a loging chain that wraps around the truck with a lock on the tailgate.

flamingbig10 · 06-26-2009, 01:08 AM

sounds like a good project

tvblazer78 · 06-26-2009, 08:36 AM

Here you go, now you can see them..

Looks good and let us know what your plans are.

ECU PIRATE · 06-26-2009, 10:05 AM

It's going to be a nice build plugs! You got a better price than the $ 500.00 I paid for the " Brown Hornet " build. I am currently running. That reminds me that I need to post some pics

JohnC · 07-01-2009, 03:40 PM

Hey Plugs welcome to the boards. Looks like a nice truck, and here locally too! Make sure and check out the Oklahoma Section. Lot of guys from here around the OKC metro area. My uncle has a phantom grill that he's not using too if you would be interested. I'm looking forward to progress, and maybe I can run by and check it out.

plugs · 07-10-2009, 09:54 AM

hey john c thanks for the info on the local gang and i am interested in the phantom grill. my truck is at my buddies shop in nw okc removing cab corners will post pics you are welcome to come and see it anytime let me know

JohnC · 07-10-2009, 10:28 AM

I may take you up on that! Next time I talk to my Uncle I'll ask him what he wants for his grill.

joe231 · 07-10-2009, 01:02 PM

cool, another Okie!!!

plugs · 07-11-2009, 02:11 PM

here are a couple of pis of the cab corners removed. rear lowering kit got here from western chasis front spindles are on back order they say 2 weeks we will see. ordered a frame paint kit from kbs coatings. hope to have cab corners on and body work on cab done within 2 weeks then paint frame and install lowering kit. decided to move bed up closer to cab by 3/4 of an inch to tighten the space between the cab and bed.<a href="http://s221.photobucket.com/albums/dd61/oldplugs/project%20yellow%20fever/?action=view&current=Picture053.jpg" target="_blank"><img src="http://i221.photobucket.com/albums/dd61/oldplugs/project%20yellow%20fever/Picture053.jpg" border="0" alt="Photobucket"></a>

<a href="http://s221.photobucket.com/albums/dd61/oldplugs/project%20yellow%20fever/?action=view&current=Picture061.jpg" target="_blank"><img src="http://i221.photobucket.com/albums/dd61/oldplugs/project%20yellow%20fever/Picture061.jpg" border="0" alt="Photobucket"></a>

plugs · 07-11-2009, 02:28 PM

http://s221.photobucket.com/albums/d...Picture061.jpg

http://s221.photobucket.com/albums/d...Picture060.jpg

JohnC · 07-13-2009, 08:34 AM

Looks like your making nice progress! Keep it going! I've heard a lot of people like the Western Chassis stuff. Will be worth the wait.

plugs · 08-03-2009, 12:09 PM

i need a little help. i am looking at wheels i want to run 20x10 and 18x7 on the truck with the stock rear using 21/2 lowering spindles and 4inch lower in the rear hangers and shackles how much backspace do i need thanks

JohnC · 08-03-2009, 05:00 PM

Hey Plugs here is a link to f.monroe's truck. Here he is talking about what he has in lowering, and what the size, and offset to his wheels. Also look at N2Trux's threads about his truck. Here is a link to his too.

f.monroe's Truck

N2Trux's Truck

plugs · 08-03-2009, 09:47 PM

thanks for the link and for the grill

JohnC · 08-04-2009, 07:50 AM

Quote:

Originally Posted by plugs

thanks for the link and for the grill

No problem man. Can't wait to see the grill in with the hood.

plugs · 08-04-2009, 07:49 PM

john c i will try and take some more picks and get them posted. i will take some pics of the interior parts and the vette hood grills with the phantom grill i got from you if i can figure out how to post them

flamingbig10 · 08-03-2009, 05:31 PM

in my option 18/20 combos look best with at least 5"of drop all around

plugs · 08-03-2009, 09:53 PM

thanks flamingbig10 i am also thinking about a 22-20 combo i may lower it more later with a flip kit and front coils but not yet i am worried about back spacing

flamingbig10 · 08-03-2009, 10:34 PM

no problem with a 10" wheel you want at least 5" of bs, what kind of wheels you going with and if you use lowering hangers and shackles make sure you keep the stock hangers if decided to do a flip kit because with drop hangers and flip kit your pinon angle will be way off but a flip kit and drop shackles work just fine together

plugs · 08-04-2009, 07:44 PM

hey flamingbig10 i have not decided on wheels i am looking around at a lot of different wheels i like a 5 spoke type wheel but have not seen the wheel that says i gotta have it yet

flamingbig10 · 08-04-2009, 08:06 PM

have you looked at coy wheels there popular
http://www.coyswheel.com/coys.html

JohnC · 08-05-2009, 08:54 AM

Quote:

Originally Posted by plugs

john c i will try and take some more picks and get them posted. i will take some pics of the interior parts and the vette hood grills with the phantom grill i got from you if i can figure out how to post them

Photobucket.com is the best place to do them. You can load all your pics there, and then it doesn't matter what computer you are on they are there. Plus it's free, and it's not using up the space on the boards here for storage.

Quote:

Originally Posted by flamingbig10

have you looked at coy wheels there popular
http://www.coyswheel.com/coys.html

They are really sharp, plus pretty affordable too. Also the Boss wheels are pretty popular. There were some problems with them fitting, but according to posts here they are redesigning the wheels to correct the issues. They are also pretty affordable. Then again it's hard to beat a Torque Thrust II's.

06-25-2009, 11:15 PM	#1
plugs Registered User Join Date: Jun 2006 Location: oklahoma city Posts: 30	low buck build project yellow fever here is my 83 sw i bought for 300 and am starting to rebuild it http://i221.photobucket.com/albums/d...Picture046.jpg Last edited by tvblazer78; 06-26-2009 at 08:32 AM.

06-25-2009, 11:25 PM	#2
plugs Registered User Join Date: Jun 2006 Location: oklahoma city Posts: 30	Re: low buck build project yellow fever and a couple of the tear down Last edited by tvblazer78; 06-26-2009 at 08:35 AM.

06-26-2009, 12:17 AM	#3
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: low buck build project yellow fever whats your plans for it __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

06-26-2009, 12:55 AM	#4
plugs Registered User Join Date: Jun 2006 Location: oklahoma city Posts: 30	Re: low buck build project yellow fever plans are for a 4inch lowering kit, new black interior,18 inch front 20 inch rear wheels. front and rear roll pans, phantom grill, 66 fuelie vette hood scoops. black top of cab and bed rails and a custom yellow pearl tri coat bottom. and a air brushed grapic at the break line of the paint that looks like a loging chain that wraps around the truck with a lock on the tailgate.

06-26-2009, 01:08 AM	#5
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: low buck build project yellow fever sounds like a good project __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

06-26-2009, 08:36 AM	#6
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: low buck build project yellow fever Here you go, now you can see them.. Looks good and let us know what your plans are. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

06-26-2009, 10:05 AM	#7
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: low buck build project yellow fever It's going to be a nice build plugs! You got a better price than the $ 500.00 I paid for the " Brown Hornet " build. I am currently running. That reminds me that I need to post some pics __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

07-01-2009, 03:40 PM	#8
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: low buck build project yellow fever Hey Plugs welcome to the boards. Looks like a nice truck, and here locally too! Make sure and check out the Oklahoma Section. Lot of guys from here around the OKC metro area. My uncle has a phantom grill that he's not using too if you would be interested. I'm looking forward to progress, and maybe I can run by and check it out. Last edited by JohnC; 07-01-2009 at 03:42 PM.

07-10-2009, 09:54 AM	#9
plugs Registered User Join Date: Jun 2006 Location: oklahoma city Posts: 30	Re: low buck build project yellow fever hey john c thanks for the info on the local gang and i am interested in the phantom grill. my truck is at my buddies shop in nw okc removing cab corners will post pics you are welcome to come and see it anytime let me know

07-10-2009, 10:28 AM	#10
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: low buck build project yellow fever I may take you up on that! Next time I talk to my Uncle I'll ask him what he wants for his grill.

07-10-2009, 01:02 PM	#11
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: low buck build project yellow fever cool, another Okie!!! __________________ *CHEVY ONLY*

07-11-2009, 02:11 PM	#12
plugs Registered User Join Date: Jun 2006 Location: oklahoma city Posts: 30	Re: low buck build project yellow fever here are a couple of pis of the cab corners removed. rear lowering kit got here from western chasis front spindles are on back order they say 2 weeks we will see. ordered a frame paint kit from kbs coatings. hope to have cab corners on and body work on cab done within 2 weeks then paint frame and install lowering kit. decided to move bed up closer to cab by 3/4 of an inch to tighten the space between the cab and bed.<a href="http://s221.photobucket.com/albums/dd61/oldplugs/project%20yellow%20fever/?action=view&current=Picture053.jpg" target="_blank"><img src="http://i221.photobucket.com/albums/dd61/oldplugs/project%20yellow%20fever/Picture053.jpg" border="0" alt="Photobucket"></a> <a href="http://s221.photobucket.com/albums/dd61/oldplugs/project%20yellow%20fever/?action=view&current=Picture061.jpg" target="_blank"><img src="http://i221.photobucket.com/albums/dd61/oldplugs/project%20yellow%20fever/Picture061.jpg" border="0" alt="Photobucket"></a>

07-11-2009, 02:28 PM	#13
plugs Registered User Join Date: Jun 2006 Location: oklahoma city Posts: 30	Re: low buck build project yellow fever http://s221.photobucket.com/albums/d...Picture061.jpg http://s221.photobucket.com/albums/d...Picture060.jpg Last edited by N2TRUX; 07-11-2009 at 02:54 PM.

07-13-2009, 08:34 AM	#14
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: low buck build project yellow fever Looks like your making nice progress! Keep it going! I've heard a lot of people like the Western Chassis stuff. Will be worth the wait.

08-03-2009, 12:09 PM	#15
plugs Registered User Join Date: Jun 2006 Location: oklahoma city Posts: 30	Re: low buck build project yellow fever i need a little help. i am looking at wheels i want to run 20x10 and 18x7 on the truck with the stock rear using 21/2 lowering spindles and 4inch lower in the rear hangers and shackles how much backspace do i need thanks



Register or Log In To remove these advertisements.

08-03-2009, 05:00 PM	#16
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: low buck build project yellow fever Hey Plugs here is a link to f.monroe's truck. Here he is talking about what he has in lowering, and what the size, and offset to his wheels. Also look at N2Trux's threads about his truck. Here is a link to his too. f.monroe's Truck N2Trux's Truck Last edited by JohnC; 08-03-2009 at 05:02 PM. Reason: Added Link

08-03-2009, 09:47 PM	#17
plugs Registered User Join Date: Jun 2006 Location: oklahoma city Posts: 30	Re: low buck build project yellow fever thanks for the link and for the grill

08-04-2009, 07:49 PM	#19
plugs Registered User Join Date: Jun 2006 Location: oklahoma city Posts: 30	Re: low buck build project yellow fever john c i will try and take some more picks and get them posted. i will take some pics of the interior parts and the vette hood grills with the phantom grill i got from you if i can figure out how to post them

08-03-2009, 05:31 PM	#20
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: low buck build project yellow fever in my option 18/20 combos look best with at least 5"of drop all around __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

08-03-2009, 09:53 PM	#21
plugs Registered User Join Date: Jun 2006 Location: oklahoma city Posts: 30	Re: low buck build project yellow fever thanks flamingbig10 i am also thinking about a 22-20 combo i may lower it more later with a flip kit and front coils but not yet i am worried about back spacing

08-03-2009, 10:34 PM	#22
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: low buck build project yellow fever no problem with a 10" wheel you want at least 5" of bs, what kind of wheels you going with and if you use lowering hangers and shackles make sure you keep the stock hangers if decided to do a flip kit because with drop hangers and flip kit your pinon angle will be way off but a flip kit and drop shackles work just fine together __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

08-04-2009, 07:44 PM	#23
plugs Registered User Join Date: Jun 2006 Location: oklahoma city Posts: 30	Re: low buck build project yellow fever hey flamingbig10 i have not decided on wheels i am looking around at a lot of different wheels i like a 5 spoke type wheel but have not seen the wheel that says i gotta have it yet

08-04-2009, 08:06 PM	#24
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: low buck build project yellow fever have you looked at coy wheels there popular http://www.coyswheel.com/coys.html __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 08-04-2009 at 08:07 PM.

Register or Log In To remove these advertisements.