Windsheild washer tank - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Byronic · 06-26-2009, 05:43 PM

Does anyone have a photo of the location of where the washer fluid container sits in a 66. Mine is missing and would like to install one.
Thanks.

protrash64 · 06-26-2009, 05:56 PM

No pic, but its on the core support near the regulator on the drivers side.

Byronic · 06-26-2009, 06:02 PM

Thanks for the note. Would still like a photo of what it looks like.

joe231 · 06-26-2009, 06:14 PM

Byronic · 06-26-2009, 06:21 PM

Rocking Cool!!! Now to find one...

**Captainfab** · 06-27-2009, 12:59 AM

Quote:

Originally Posted by Byronic

Rocking Cool!!! Now to find one...

I think I have a couple left that aren't powder coated.

ol Curt · 06-27-2009, 07:26 AM

Mine originally had a crack in it. I had a friend who was rebuilding a 68 Camaro and the one from it fit perfectly.

**DPowers** · 06-26-2009, 09:00 PM

I might have one- let me check. Do you need both bracket and bottle?

joe231 · 06-26-2009, 11:46 PM

you got some extra tanks laying around?

**aerotruk63** · 06-27-2009, 08:33 AM

They are the same in car or truck. The other factory optioned location is beside your master cylinder to the drivers side. See the two bolts beside the master. These will accommodate the mounting bracket only if you do not have the power brake option.

Byronic · 06-27-2009, 09:37 AM

If any one has both tank and bracket please pm me. Thanks

**Captainfab** · 06-27-2009, 11:46 PM

You can get both the bracket and resevior from most of the truck parts suppliers......LMC, Classic Parts, as well as some of the board vendors such as GMC Pauls, Mikes Bump and Grind.

joe231 · 06-28-2009, 12:12 AM

it is my understanding that those tanks aren't factory correct for the '60-'66's....
not that it matters to everyone....just what I have heard

Byronic · 06-28-2009, 09:43 AM

Found one. Thanks for all the input.

ol Curt · 06-28-2009, 05:03 PM

Quote:

Originally Posted by joe231

it is my understanding that those tanks aren't factory correct for the '60-'66's....
not that it matters to everyone....just what I have heard

Which ones?...the one in my pic is original....excepting that I put an identical tank in it from the Camaro

jbgroby · 06-28-2009, 05:25 PM

I have the 1960 GMC/Chevy asses. manual and the instruc. book The correct type for the "60-61 model years was a bag see pic. Finding a floor mounted pump is super hard, anybody got one, I'll buy it.

I'll check my assec. installation guide for any later model info.

**aerotruk63** · 06-28-2009, 07:35 PM

Gotta be careful if your going original, Chevrolet and GMC did not allways share the same parts and accessories. And then at times they did but GMC had different part numbers than Chevrolet even though it was the same part. My 2 cents Canadian worth about a penny American.

joe231 · 06-29-2009, 12:01 AM

Quote:

Originally Posted by ol Curt

Which ones?...the one in my pic is original....excepting that I put an identical tank in it from the Camaro

I was referring to Capt's post above mine...
some of the vendors carry a tank that is supposedly correct, but I have it on good authority that they all aren't actually "correct"

**Captainfab** · 06-29-2009, 12:21 AM

Quote:

Originally Posted by joe231

I was referring to Capt's post above mine...
some of the vendors carry a tank that is supposedly correct, but I have it on good authority that they all aren't actually "correct"

I hadn't heard that......not having bought one yet, I just assumed they would be OK. What have you heard is wrong with them?

joe231 · 06-28-2009, 03:26 PM

where did you find one?

joe231 · 06-29-2009, 12:24 AM

I heard from Tony (I believe) that they are just different.....maybe a universal type dealy-o from another year or something...
I'm pretty sure they would function correctly....just might not be right from a purist resto stand-point

**Captainfab** · 06-29-2009, 12:29 AM

Oh I see.......I might just have to buy one to check it out and compare.

joe231 · 06-29-2009, 12:34 AM

cool, let us know the outcome

*LILRED66* · 06-29-2009, 06:23 AM

The aftermarket unit does not have the stand-off portion of the back of the bracket, therefore is does not extend out from the radiator support, in order to clear the voltage regulator & horn relay. It is virtually the same bracket, minus the stand-off, that is spot-welded to the back of the bracket. I have a few of the aftermarket style, without the stand-off, and they are not correct, however they can be modified to work. This style is commonly found on the GM cars of the same era.

The '62-'66, I believe, models are mounted on the radiator support and the '60-'61 are mounted on the firewall, adjacent to the master cylinder.

The Chevy trucks did not have the bag-style wiper fluid holder. Two speed wipers and fluid containers were an option until 1966, when the Federal government mandated this equipment on trucks, along with reverse lights and lap belts. Until then, this equipment was an R.P.O. (regular production option) installed at the dealership level.

*LILRED66* · 06-29-2009, 06:33 AM

Here is a picture of the correct style for the '60-'66 Chevy trucks.

06-26-2009, 05:43 PM	#1
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Windsheild washer tank Does anyone have a photo of the location of where the washer fluid container sits in a 66. Mine is missing and would like to install one. Thanks. __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

06-26-2009, 05:56 PM	#2
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Windsheild washer tank No pic, but its on the core support near the regulator on the drivers side. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

06-26-2009, 06:02 PM	#3
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: Windsheild washer tank Thanks for the note. Would still like a photo of what it looks like. __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

06-26-2009, 06:14 PM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Windsheild washer tank __________________ *CHEVY ONLY*

06-26-2009, 06:21 PM	#5
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: Windsheild washer tank Rocking Cool!!! Now to find one... __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

06-27-2009, 07:26 AM	#7
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Windsheild washer tank Mine originally had a crack in it. I had a friend who was rebuilding a 68 Camaro and the one from it fit perfectly. Attached Images __________________ 1966 Chevy C10 Longbed I'm Bob....ol Curt was my Grandpa The truck was his and he sure as heck wouldn't understand why I took a perfectly good truck and tore it down!

06-26-2009, 09:00 PM	#8
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,443	Re: Windsheild washer tank I might have one- let me check. Do you need both bracket and bottle?

06-26-2009, 11:46 PM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Windsheild washer tank you got some extra tanks laying around? __________________ *CHEVY ONLY*

06-27-2009, 08:33 AM	#10
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Windsheild washer tank They are the same in car or truck. The other factory optioned location is beside your master cylinder to the drivers side. See the two bolts beside the master. These will accommodate the mounting bracket only if you do not have the power brake option.

06-27-2009, 09:37 AM	#11
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: Windsheild washer tank If any one has both tank and bracket please pm me. Thanks __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

06-27-2009, 11:46 PM	#12
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Windsheild washer tank You can get both the bracket and resevior from most of the truck parts suppliers......LMC, Classic Parts, as well as some of the board vendors such as GMC Pauls, Mikes Bump and Grind. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-28-2009, 12:12 AM	#13
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Windsheild washer tank it is my understanding that those tanks aren't factory correct for the '60-'66's.... not that it matters to everyone....just what I have heard __________________ *CHEVY ONLY*

06-28-2009, 09:43 AM	#14
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: Windsheild washer tank Found one. Thanks for all the input. __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

06-28-2009, 05:25 PM	#16
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: Windsheild washer tank I have the 1960 GMC/Chevy asses. manual and the instruc. book The correct type for the "60-61 model years was a bag see pic. Finding a floor mounted pump is super hard, anybody got one, I'll buy it. I'll check my assec. installation guide for any later model info. Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

06-28-2009, 07:35 PM	#17
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Windsheild washer tank Gotta be careful if your going original, Chevrolet and GMC did not allways share the same parts and accessories. And then at times they did but GMC had different part numbers than Chevrolet even though it was the same part. My 2 cents Canadian worth about a penny American. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1



Register or Log In To remove these advertisements.

06-28-2009, 03:26 PM	#20
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Windsheild washer tank where did you find one? __________________ *CHEVY ONLY*

06-29-2009, 12:24 AM	#21
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Windsheild washer tank I heard from Tony (I believe) that they are just different.....maybe a universal type dealy-o from another year or something... I'm pretty sure they would function correctly....just might not be right from a purist resto stand-point __________________ *CHEVY ONLY* Last edited by joe231; 06-29-2009 at 12:26 AM.

06-29-2009, 12:29 AM	#22
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Windsheild washer tank Oh I see.......I might just have to buy one to check it out and compare. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-29-2009, 12:34 AM	#23
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Windsheild washer tank cool, let us know the outcome __________________ *CHEVY ONLY*

06-29-2009, 06:23 AM	#24
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Windsheild washer tank The aftermarket unit does not have the stand-off portion of the back of the bracket, therefore is does not extend out from the radiator support, in order to clear the voltage regulator & horn relay. It is virtually the same bracket, minus the stand-off, that is spot-welded to the back of the bracket. I have a few of the aftermarket style, without the stand-off, and they are not correct, however they can be modified to work. This style is commonly found on the GM cars of the same era. The '62-'66, I believe, models are mounted on the radiator support and the '60-'61 are mounted on the firewall, adjacent to the master cylinder. The Chevy trucks did not have the bag-style wiper fluid holder. Two speed wipers and fluid containers were an option until 1966, when the Federal government mandated this equipment on trucks, along with reverse lights and lap belts. Until then, this equipment was an R.P.O. (regular production option) installed at the dealership level. Attached Images

06-29-2009, 06:33 AM	#25
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Windsheild washer tank Here is a picture of the correct style for the '60-'66 Chevy trucks. Attached Images

Register or Log In To remove these advertisements.