The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-10-2009, 03:20 PM   #1
evan
Registered User
 
evan's Avatar
 
Join Date: Jul 2005
Location: SK, Canada
Posts: 488
2 different ride heights possible with air bags?

If I had a CoolRide kit on the front and a AIRoverLeaf kit on the back of my '79 C-15 could I use two different ride heights (lower for summer and higher for winter) or is it really important to maintain the recommended 5" bag height at ride height?
__________________
Evan B.
evan is offline   Reply With Quote
Old 07-10-2009, 10:32 PM   #2
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
Re: 2 different ride heights possible with air bags?

I'm sure someone else will chime in with true bag experience.... but what I have learned from reading on here is the recommended pressure is for best ride comfort. You can do less or more pressure to raise/lower the bags but you will sacrifice some ride quality by doing that buy probably not too much for an inch or two difference.
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 07-10-2009, 11:17 PM   #3
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
Re: 2 different ride heights possible with air bags?

Quote:
Originally Posted by VA72C10 View Post
I'm sure someone else will chime in with true bag experience.... but what I have learned from reading on here is the recommended pressure is for best ride comfort. You can do less or more pressure to raise/lower the bags but you will sacrifice some ride quality by doing that buy probably not too much for an inch or two difference.
Pressures not within the mfr's guidlines can affect ride quality. The good news about that is ride quality is purely subjective. What I like, you may not etc.... So, w/o saying it's a good or bad idea, 'dual' pressure/ride height is possible. The one thing that will make a difference is you can only set the alignment @ one height or the other (unless you get it re-aligned each time).

You could set up your 'winter' front ride height w/stock spindles & bags & align it there. Then when spring/summer rolls around, swap to some drop spindles for a quick 3" of additional drop. The alignment would ideally need to be re-done but it might be close enough w/o one that the tires wouldn't wear crazy fast. Set up the rear w/a flip kit, 2 main leaves, & AOL. Pop in a lowering block & you're now quickly 2"-3" lower.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.

Last edited by SCOTI; 07-10-2009 at 11:25 PM.
SCOTI is online now   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com