Radiator hold down questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brew8 · 07-15-2009, 01:14 PM

I bought a new radiator from the local shop and it's mounting is differen't, I have the mounts from a 63 4x4 it has spread out mounts on the bottom but the new radiator is tapered at the bottom and I'll have to move them in, I'm good with that but the top seems to have to be offset, I saw a 66 truck hold-down on ebay and it seems off set to the passenger side a little. So am I looking at it right? is this so? If it is it may work for me, Larry

**Captainfab** · 07-16-2009, 12:00 AM

Yes the top hold down is offset a little.

07-15-2009, 01:14 PM	#1
brew8 Registered User Join Date: Dec 2008 Location: Billings, MT Posts: 130	Radiator hold down questions I bought a new radiator from the local shop and it's mounting is differen't, I have the mounts from a 63 4x4 it has spread out mounts on the bottom but the new radiator is tapered at the bottom and I'll have to move them in, I'm good with that but the top seems to have to be offset, I saw a 66 truck hold-down on ebay and it seems off set to the passenger side a little. So am I looking at it right? is this so? If it is it may work for me, Larry Last edited by brew8; 07-15-2009 at 01:15 PM.

07-16-2009, 12:00 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Radiator hold down questions Yes the top hold down is offset a little. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.