Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
07-16-2009, 09:07 AM | #1 |
Registered User
Join Date: Jul 2009
Location: Burlington, North Carolina
Posts: 85
|
20 X 12 with mini tubs?
Any one have 3" tubs and running a 20 X 12 on the rear? If so, what offset do you have? Or, just how wide can I go?
|
07-16-2009, 09:19 AM | #2 |
My Carbon Footprint
Join Date: Oct 2008
Location: Orygun
Posts: 5,527
|
Re: 20 X 12 with mini tubs?
Click on my build thread below. I don't have 20" tall wheels....but I do have 14" wide wheels!!! If you do a mini tub job like I did, you can get HUGE tire and wheel combos under these truck with the trailing arm rear end. My backspacing is about 8.75 and I could have gone more. I know it's not the exact setup you were asking about but it should at least confirm that 12" wide is a piece of yummy chocolate cake!
|
07-16-2009, 09:28 AM | #3 |
Senior Member
Join Date: Aug 2002
Location: Valley Center KS
Posts: 3,525
|
Re: 20 X 12 with mini tubs?
I'm running 20x10 with 5.75 BS and that puts the tire just barely inside the wheel well at full dump (315/35/20) so I would say you can run 7.75 BS with 20x12s though you may want to run a little more to play it safe.
I wanted to run 20x12s initially, but it was a lot of extra $$$$ to get those extra 2 inches. |
Bookmarks |
|
|