Wire Loom Set Ideas.....? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MacAttack · 07-24-2009, 06:20 PM

Okay kids - truck's back in my hands next Friday and I've got to remove the melted plastic POS Mr. Goodwrench looms that hold my beautiful red Taylor 8mm wires in place.

This is what I'm considering (for about $30.00 from Summit Racing), in black:

Any other ideas to keep the ignition wires from frying on the ram-horns?

Mac.

joe231 · 07-24-2009, 06:32 PM

subscibed!!

show me the cool shat-ner!!!

MacAttack · 07-24-2009, 06:37 PM

I've already got a set of these (from the Chevelle project), but if I encase the wires inside them, over the exhaust manifolds, I might as well pull out a bottle of KC Masterpiece sauce and eat them after about a week of driving.

Mac.

**ChiefRocka** · 07-24-2009, 11:47 PM

Quote:

Originally Posted by MacAttack

I've already got a set of these (from the Chevelle project), but if I encase the wires inside them, over the exhaust manifolds, I might as well pull out a bottle of KC Masterpiece sauce and eat them after about a week of driving.

Mac.

I running those on my truck...and run the $hit out of it, and never had a problem...although I'm running center dumps though....
-
-

MacAttack · 07-27-2009, 10:01 AM

Quote:

Originally Posted by ChiefRocka

I running those on my truck...and run the $hit out of it, and never had a problem...although I'm running center dumps though....
-
-

Good to know, John. My exhaust dumps straight down at the center too, so maybe I'll be okay. The first set of looms only cooked on the passenger side, during the 20 minute break-in, and I'm guessing that's because the fan turns toward the driver's side. I could barely feel any air flow when I walked to the passenger side, but a tornado on the driver's - coming out of the fan shroud.

Mac.

joe231 · 07-24-2009, 06:42 PM

mmmm...Bar-B-Que

MacAttack · 07-24-2009, 06:52 PM

Quote:

Originally Posted by joe231

mmmm...Bar-B-Que

Tx Firefighter · 07-24-2009, 08:11 PM

If you will loom them like original around the back of the engine and under the manifolds, you will never have any more troubles. Look at 67-72 truck sources for the proper loom brackets. I do all mine that way and run them for years and years without a worry.

jason65 · 07-24-2009, 09:45 PM

Sell the 283 and go with something with a coil on plug design.

jbgroby · 07-24-2009, 09:49 PM

Thats why I love my V-6 The wires run on the inside away from all the hot spots. Click on my Avatar to get a close look.

07-24-2009, 06:20 PM	#1
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Wire Loom Set Ideas.....? Okay kids - truck's back in my hands next Friday and I've got to remove the melted plastic POS Mr. Goodwrench looms that hold my beautiful red Taylor 8mm wires in place. This is what I'm considering (for about $30.00 from Summit Racing), in black: Any other ideas to keep the ignition wires from frying on the ram-horns? Mac. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

07-24-2009, 06:32 PM	#2
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Wire Loom Set Ideas.....? subscibed!! show me the cool shat-ner!!! __________________ *CHEVY ONLY* Last edited by joe231; 07-24-2009 at 06:32 PM.

07-24-2009, 06:37 PM	#3
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Wire Loom Set Ideas.....? I've already got a set of these (from the Chevelle project), but if I encase the wires inside them, over the exhaust manifolds, I might as well pull out a bottle of KC Masterpiece sauce and eat them after about a week of driving. Mac. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

07-24-2009, 06:42 PM	#6
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Wire Loom Set Ideas.....? mmmm...Bar-B-Que __________________ *CHEVY ONLY*

07-24-2009, 08:11 PM	#8
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Wire Loom Set Ideas.....? If you will loom them like original around the back of the engine and under the manifolds, you will never have any more troubles. Look at 67-72 truck sources for the proper loom brackets. I do all mine that way and run them for years and years without a worry. __________________ I'm on the Instagram- @Gearhead_Kevin

07-24-2009, 09:45 PM	#9
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: Wire Loom Set Ideas.....? Sell the 283 and go with something with a coil on plug design. Last edited by jason65; 07-24-2009 at 09:52 PM. Reason: yabbadabbadoo

07-24-2009, 09:49 PM	#10
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: Wire Loom Set Ideas.....? Thats why I love my V-6 The wires run on the inside away from all the hot spots. Click on my Avatar to get a close look. __________________ http://s1299.photobucket.com/user/jb...23904108567829 Last edited by jbgroby; 07-24-2009 at 09:50 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.