The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Welcome and Discussion > Welcome Area

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-31-2009, 12:50 AM   #1
Diablo de la Noche
Registered User
 
Diablo de la Noche's Avatar
 
Join Date: Jul 2009
Location: El Paso, Texas
Posts: 142
Where does one start?

I want to fix this truck up, but also want to enjoy it as long as possible. Where do I start? I know I have to go through every square inch of it and probably replace most of the soft stuff. Its a 67 longbed with almost no rust. I got it started at the dealer (yes, the dealer) and it scared me. the engine is a chevy 350 and is really untamed. I had it towed to my house because they said it was unsafe to drive on the highway. Now, why did I buy an unsafe vehicle from a dealer? Because it is a 67 GMC longbed with no rust and was only $900.
So, no rust, no straight panels but no real kinks, solid underneath, scary 350, and nothing works right. It does run and drive and I want to enjoy it. It won't be a resto because I don't want to put in the original v-6 and the numbers won't match anyway. It will be a mild custom. Where do I start?
Diablo de la Noche is offline   Reply With Quote
Old 07-31-2009, 01:29 AM   #2
70LonghornCST
Moderator
 
70LonghornCST's Avatar
 
Join Date: Jun 2008
Location: Modesto, CA
Posts: 5,775
Re: Where does one start?

I'd start off by getting it road dependable so you can enjoy it. Everything under the hood needs to be dialed in, as well as brakes and suspension if needed. Then, I would make sure any electrical issues are addressed. After that, begin with any needed body work. Replace sheet metal if needed or repair if you are able. Get her straight and dependable and ride the heck out of her. The rest will follow...
__________________
2018 Chevy Crew Cab
2006 Impala SS
1965 Plymouth Sport Fury
1970 Chevy Longhorn
  • Bucket Seats
  • Shoulder Belts
  • Front Tow Hooks
  • Factory Air
  • Factory Speedwarning, Tach & Vaccum
  • Factory Tilt
  • CST Package
  • AM/FM Radio
  • Bumper Guards
Richard

70 Longhorn CST Build

Adding an AM/FM Decal
70LonghornCST is offline   Reply With Quote
Old 07-31-2009, 02:11 AM   #3
Diablo de la Noche
Registered User
 
Diablo de la Noche's Avatar
 
Join Date: Jul 2009
Location: El Paso, Texas
Posts: 142
Re: Where does one start?

Ok, the question was asked, and now the entertainment. Just about everyone has a story about how they met their perfect match. You know how nothing goes right and you know it, but you think maybe it's just a spiritual test? Well, that is what happened. I've been scouring auto trader, the paper, and craigs list. I told my buddies that I would but the vehicle that really grabbed me. The wife told me I could spend $2,000 (shut up, your wife set your limit, too!). I was all over town, physically searching for that car parked in front of someone's house with the "for sale" sign, less than $2k. I checked CL right before bed and there she was, the beast.
Early monday morning I was in that fly-by-night dealership, thinking about the catch, why is this deal so good? These guys were brutally honest with me. They said plenty of guys have called and some showed up, but no papers signed. The truck was parked in the back of the dealership, hidden from public view, in a effort not to scare off customers. We went out and they said they would have to jump it because the battery was a tiny little thing, like for a tractor or something. We propped open the hood with a windshield squeegee-thing like at the gas stations, that was stored in front of the radiator. The red cable was so corroded it was solid. I knew the jump was going to be an adventure. Good.
We hooked it up and nothing but "click, click, click". So, after about half an hour, the jumper cables start smoking and it finally starts. Now, I haven't been around a real engine in many, many years and forgot what they were all about. It's one thing to watch them on tv and read about them, but when the (semi) controlled chaos is mere inches away, you tend to cringe when that throttle is opened, even a little. I got in the cab and romped on it, just a little. Just a little is all I am willing to take a chance with right now. The whole cab shook like I was driving over washboards at a hundred miles an hour. Unfortunately the rest of the truck shook independently from the cab, the hood, the fenders, the bed, even the doors were rattling away. I thought the windows were going to shatter inside the doors!
While we were sitting in the office, sweating our butts off, (95 degrees at 9 in the morning? That's El Paso!) a guy walks in asking about the truck. I told him he should have been here an hour ago, but he is welcome to look at the truck. I figured I would rub it in a little. The salesman tells me that the prevous owner drove it every day all over the place, but they couldn't figure out how. The mechanic got in and drove it 10 feet, put it in reverse, parked it against the fence, and refused to drive it any further. "It's a safety hazard" he said. So I had them tow it to my house. $35 all the way across town.
I questioned myself as to why they wanted to get rid of this thing so bad. Still can't figure it out.
I went out into my garage where the beast is sleeping, and it stinks like old gas. I told my wife it smells like a proper garage, not like the new house it actually is.
All the guys that see it are all thumbs up. My wife said "it must be a guy thing". My daughter said "why?". Of course that was after I told her I sold her car so I could buy it, and she believed me. I love being a dad.
I figure I got a pretty good deal. I spent $895 pluss "TT&L" which came out to $1175, including the tow, and it is totally legal, paperwork wise. I even got a free pair of vise grips to roll up the window. Just keep your kids away from the street when you see me coming, it is still a safety hazard!

Last edited by Diablo de la Noche; 07-31-2009 at 02:18 AM. Reason: for content and so it will fit your tv screen.
Diablo de la Noche is offline   Reply With Quote
Old 07-31-2009, 02:14 AM   #4
Diablo de la Noche
Registered User
 
Diablo de la Noche's Avatar
 
Join Date: Jul 2009
Location: El Paso, Texas
Posts: 142
Re: Where does one start?

So...
1-Engine tune
2-Brakes
3-Suspension
4-Electrical
5-Metal
6-Paint
7-Engine rebuild if needed
Is that pretty much the order to do things? I haven't done one before, but have some mech experience, just not on vehicles, so much. (military, aircraft, support equipment, and my kid's car)

Last edited by Diablo de la Noche; 07-31-2009 at 03:01 AM. Reason: Cause I screwed it up the first time!
Diablo de la Noche is offline   Reply With Quote
Old 07-31-2009, 03:57 AM   #5
OARNGESI
Registered User
 
OARNGESI's Avatar
 
Join Date: Sep 2008
Location: CASA GRANDE AZ
Posts: 4,276
Re: Where does one start?

Welcome really great story on your truck sounds like your already enjoying it
__________________
70 SWB STEPSIDE
70 BLAZER
09 challenger
OARNGESI is offline   Reply With Quote
Old 07-31-2009, 07:52 AM   #6
1970 Bowtie
It's all in the timing
 
1970 Bowtie's Avatar
 
Join Date: May 2009
Location: Lake Mary,Florida
Posts: 600
Re: Where does one start?

Welcome to the boards,that was a great story and you sound really excited about your new truck.You will find a lot of great folks on here that are more than happy to help and answer any and all questions you may have.Congrats and keep us posted of your progress and post some pics when you get a chance.
1970 Bowtie is offline   Reply With Quote
Old 07-31-2009, 07:46 AM   #7
72BlckButy
Tot Roddin'
 
72BlckButy's Avatar
 
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
Re: Where does one start?

to the board from Mid-MO!!!

You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more.
__________________
-Nate

1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6)
1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior)
2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)
72BlckButy is offline   Reply With Quote
Old 07-31-2009, 09:39 AM   #8
redneckgirl
Registered User
 
redneckgirl's Avatar
 
Join Date: Jun 2006
Location: Bel Air, Maryland
Posts: 4,853
Re: Where does one start?

Welcome to the board from Maryland!!

And yeah...that's about the order you will want to take care of things IMO...although if the engine needs rebuilt, I think I'd tackle that before the body work. Unless she's running and driving and you're just wanting to spice her up a bit.

Congrats on the new toy
__________________
The place where you made your stand never mattered. Only that you were there... and still on your feet.
Stephen King
redneckgirl is offline   Reply With Quote
Old 07-31-2009, 11:31 AM   #9
shaneschevys
Its always something!
 
shaneschevys's Avatar
 
Join Date: Aug 2005
Location: FT Worth,TX
Posts: 4,992
Re: Where does one start?

Welcome from FT Worth!
__________________
79 p10 stepvan
72 Short Fleetside
72 Suburban
67 GMC One Ton Flatbed
64 Short Fleetside
57 Chevy 2DR Hard Top
57 Chevy 2dr wagon
65 f*** short fleet
63 C 60 Flatbed




Member of the patina club
shaneschevys is offline   Reply With Quote
Old 07-31-2009, 03:37 PM   #10
DREAMS OF A 67
Step Brother
 
DREAMS OF A 67's Avatar
 
Join Date: Sep 2007
Location: knoxville TN
Posts: 1,950
Smile Re: Where does one start?

FROM KNOXVILLE TN!!!
__________________
Joe
DREAMS OF A 67 is offline   Reply With Quote
Old 07-31-2009, 04:33 PM   #11
Jerry Jones
Happy Camper
 
Jerry Jones's Avatar
 
Join Date: Feb 2006
Location: Northern California
Posts: 8,407
Re: Where does one start?

Welcome from Northern California!
__________________
RIP El Jay! Love you brother!
Jerry Jones is offline   Reply With Quote
Old 08-01-2009, 12:45 AM   #12
jsbgump
Gone Fishing
 
jsbgump's Avatar
 
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
Re: Where does one start?

Welcome to the board from a fellow texan
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started
2022 Hyundai Tucson Limited
2019 Chevy Traverse Redline Edition Wifes Ride
Build Thread

http://67-72chevytrucks.com/vboard/s...=1#post3483616
jsbgump is offline   Reply With Quote
Old 08-02-2009, 10:12 AM   #13
Cyclone44
Step Brother
 
Cyclone44's Avatar
 
Join Date: Sep 2007
Location: K-town
Posts: 4,029
Re: Where does one start?

Welcome from Knoxville Tn......
Cyclone44 is offline   Reply With Quote
Old 08-02-2009, 04:39 PM   #14
68,69 K20
They call me the Breeze...
 
68,69 K20's Avatar
 
Join Date: Jul 2007
Location: New York
Posts: 2,251
Re: Where does one start?

Welcome from NY!
__________________
Mike

69 K20

"Beer is proof God loves us and wants us to be happy"....Ben Franklin
68,69 K20 is offline   Reply With Quote
Old 08-04-2009, 09:25 PM   #15
Ron 586
RIP Mr Ron
 
Ron 586's Avatar
 
Join Date: Dec 2005
Location: Big Sandy, Tn. 38221
Posts: 8,150
Re: Where does one start?

Welcome to the board from Big Sandy, West Tennessee.
__________________
Ron (Mr Round Tuit)

Be kinder than necessary, for everyone you meet is fighting some kind of battle

TN Message Forum

TN Facebook Group

SETN Truck Show

My Photobucket
Ron 586 is offline   Reply With Quote
Reply

Bookmarks

Tags
starting point


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:02 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com