All most on the ground! PB Style - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10Sim · 08-31-2009, 11:23 AM

Got the whole front works from PB and we are in the process of completing the rear. So far im really pleased with Nate's work and helpfulness. I will continue to post as I get more done.

If you have any ideas or tips put them out there.

Goals:
Have a complete rolling chassy with a starting motor.
Take apart and send out for blasting and paint
I would like to lay pinch welds...Just dont know how much mods that going to take due to my big block...

Im trying to go with a 24''x14 in the rear and 24''x10 in the front. Worst case senario, run 22'' up front.

C10Sim · 08-31-2009, 11:24 AM

more pic's.

C10Sim · 08-31-2009, 11:26 AM

and more.

bigbadjohn84 · 08-31-2009, 11:44 AM

sweet

**lolife99** · 08-31-2009, 12:23 PM

Subscribing!
Nice work.
I have a PB Dropmember for a BB also,... so the pics were a great help.
What headers are you using?

C10Sim · 08-31-2009, 03:21 PM

Quote:

Originally Posted by lolife99

Subscribing!
Nice work.
I have a PB Dropmember for a BB also,... so the pics were a great help.
What headers are you using?

Im using Sanderson Headers BB8, they are nice quality, require no gasket and run about $500 with ceramic coating and shipping.

baggedcten · 08-31-2009, 09:07 PM

Nice job!!!

72BlckButy · 08-31-2009, 09:12 PM

Wow... that is one nice install!

Okay, so we have the possible wheel sizes... what about the wheel itself?

C10Sim · 08-31-2009, 09:18 PM

Quote:

Originally Posted by 72BlckButy

Wow... that is one nice install!

Okay, so we have the possible wheel sizes... what about the wheel itself?

As for the wheels I have something like this in mind...

Mordachai · 08-31-2009, 10:16 PM

this is gonna be slick when it's done. BB to boot!

*1sik52* · 08-31-2009, 11:12 PM

Subscribed

DrtyJack75 · 08-31-2009, 11:17 PM

Ive got the sanderson headers that require no gasket, but mine leak...I would suggest you use something...either a sealer or get some gaskets...

GVizzle · 08-31-2009, 11:30 PM

Looks Sick!

You're gonna need a Porterbuilt "Bolt on Body Drop" .

BigShoe24 · 08-31-2009, 11:30 PM

Looks Good! Keep it up! Be careful and make sure you can get some tires that are the correct size for what your looking for. Pickens get pretty slim for that size of wheel, Good Luck1

C10Sim · 09-01-2009, 07:58 PM

Quote:

Originally Posted by DrtyJack75

Ive got the sanderson headers that require no gasket, but mine leak...I would suggest you use something...either a sealer or get some gaskets...

Did you contact Sanderson and tell them about your problem? They seemed pretty helpful when I purchased or maybe they just wanted my money!

Quote:

Originally Posted by GVizzle

Looks Sick!

You're gonna need a Porterbuilt "Bolt on Body Drop" .

I'm anxious for the release date!

Quote:

Originally Posted by BigShoe24

Looks Good! Keep it up! Be careful and make sure you can get some tires that are the correct size for what your looking for. Pickens get pretty slim for that size of wheel, Good Luck1

Well im going to borrow my friend wheels to mock and take measurements. He runnin 24x10 smoothies with 225 or 235 tire, this should give me a good idea on possibilities.

lowdownstar · 09-01-2009, 08:21 PM

Am in on this one as well. Looking good and thanks again for the help

Ray

Tagg33 · 09-01-2009, 08:21 PM

Subscribed!

ShowSS12 · 09-02-2009, 12:11 AM

badass..... where in houston are you?

C10Sim · 09-02-2009, 12:30 AM

Quote:

Originally Posted by FRENCHBLUE72

Bad azzzz.

Thanks!

Quote:

Originally Posted by ShowSS12

badass..... where in houston are you?

Im on the East side of Houston near off of IH-10 and 610 East, close by the Budwizer plant.

FRENCHBLUE72 · 09-02-2009, 12:04 AM

Bad azzzz.

**wancosc356** · 09-02-2009, 05:20 PM

Subscribed!

bigbadjohn84 · 09-03-2009, 11:12 AM

are you serious? bolt on body drop? what is that like a complete custom frame??? I know there are some companies out there making complete frames to accomplish that.

68laydout · 09-03-2009, 06:08 PM

Quote:

Originally Posted by bigbadjohn84

are you serious? bolt on body drop? what is that like a complete custom frame??? I know there are some companies out there making complete frames to accomplish that.

You can easily get 1" body drop on these trucks by dropping the body mounts an inch. I should'nt say easy, because those body mounts are a major pita to get off because of the rivets holding them on. Not to mention the other stuff that gets affected by body dropping an inch. The only thing I see bolt on about it is new body mounts that actually bolt on. I assume the bed will have some bolt on mounts too? Interested to see what he comes up with for a true bolt on. It wont be more than 1" though, unless you want to raise the floor.

C10Sim · 09-04-2009, 11:13 AM

Quote:

Originally Posted by 68laydout

You can easily get 1" body drop on these trucks by dropping the body mounts an inch. I should'nt say easy, because those body mounts are a major pita to get off because of the rivets holding them on. Not to mention the other stuff that gets affected by body dropping an inch. The only thing I see bolt on about it is new body mounts that actually bolt on. I assume the bed will have some bolt on mounts too? Interested to see what he comes up with for a true bolt on. It wont be more than 1" though, unless you want to raise the floor.

It was just a joke but from what i've read your explaination seems true.

68laydout · 09-04-2009, 05:50 PM

Quote:

Originally Posted by C10Sim

It was just a joke but from what i've read your explaination seems true.

lmao, I thought I read a post that PB was talking about it. I read back through this post and looks like I took it hook, line, and sinker. Guess I need to lay off the crack pipe.

That's some funny ****.

08-31-2009, 11:23 AM	#1
C10Sim Registered User Join Date: Oct 2008 Location: Houston, Tx Posts: 469	All most on the ground! PB Style Got the whole front works from PB and we are in the process of completing the rear. So far im really pleased with Nate's work and helpfulness. I will continue to post as I get more done. If you have any ideas or tips put them out there. Goals: Have a complete rolling chassy with a starting motor. Take apart and send out for blasting and paint I would like to lay pinch welds...Just dont know how much mods that going to take due to my big block... Im trying to go with a 24''x14 in the rear and 24''x10 in the front. Worst case senario, run 22'' up front. Attached Images __________________ 1968 Chevy Pickup http://67-72chevytrucks.com/vboard/s...d.php?t=321717 1959 Chevy Apache 3100 SWB Big Window http://67-72chevytrucks.com/vboard/s...d.php?t=597069

08-31-2009, 11:24 AM	#2
C10Sim Registered User Join Date: Oct 2008 Location: Houston, Tx Posts: 469	Re: All most on the ground! PB Style more pic's. Attached Images __________________ 1968 Chevy Pickup http://67-72chevytrucks.com/vboard/s...d.php?t=321717 1959 Chevy Apache 3100 SWB Big Window http://67-72chevytrucks.com/vboard/s...d.php?t=597069

08-31-2009, 11:26 AM	#3
C10Sim Registered User Join Date: Oct 2008 Location: Houston, Tx Posts: 469	Re: All most on the ground! PB Style and more. Attached Images __________________ 1968 Chevy Pickup http://67-72chevytrucks.com/vboard/s...d.php?t=321717 1959 Chevy Apache 3100 SWB Big Window http://67-72chevytrucks.com/vboard/s...d.php?t=597069

08-31-2009, 11:44 AM	#4
bigbadjohn84 Registered User Join Date: Feb 2008 Location: Florala, AL Posts: 398	Re: All most on the ground! PB Style sweet

08-31-2009, 12:23 PM	#5
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: All most on the ground! PB Style Subscribing! Nice work. I have a PB Dropmember for a BB also,... so the pics were a great help. What headers are you using? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 08-31-2009 at 12:24 PM.

08-31-2009, 09:07 PM	#7
baggedcten 86 C10 Join Date: Sep 2007 Location: Ga. Posts: 416	Re: All most on the ground! PB Style Nice job!!! __________________ 1986 C10 2001 chevy silverado purchased 8-29-09 sold 2004 silverado purchased 8-27-10 sold

08-31-2009, 09:12 PM	#8
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: All most on the ground! PB Style Wow... that is one nice install! Okay, so we have the possible wheel sizes... what about the wheel itself? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-31-2009, 10:16 PM	#10
Mordachai Fat Fendered Fleetside Join Date: Nov 2004 Location: WPB, S. FL, USA, Earth Posts: 718	Re: All most on the ground! PB Style this is gonna be slick when it's done. BB to boot! __________________ 71 GMC lwb 56 Big window swb 93 GMC Sonoma (dd) radiused fiberglass fender project for 67-72

08-31-2009, 11:12 PM	#11
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: All most on the ground! PB Style Subscribed

08-31-2009, 11:17 PM	#12
DrtyJack75 Registered User Join Date: Feb 2008 Location: West Sacramento, CA Posts: 417	Re: All most on the ground! PB Style Ive got the sanderson headers that require no gasket, but mine leak...I would suggest you use something...either a sealer or get some gaskets...

08-31-2009, 11:30 PM	#13
GVizzle Registered User Join Date: Oct 2008 Location: San Clemente, CA Posts: 405	Re: All most on the ground! PB Style Looks Sick! You're gonna need a Porterbuilt "Bolt on Body Drop" .

08-31-2009, 11:30 PM	#14
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: All most on the ground! PB Style Looks Good! Keep it up! Be careful and make sure you can get some tires that are the correct size for what your looking for. Pickens get pretty slim for that size of wheel, Good Luck1 __________________ RCC

09-01-2009, 08:21 PM	#16
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: All most on the ground! PB Style Am in on this one as well. Looking good and thanks again for the help Ray

09-01-2009, 08:21 PM	#17
Tagg33 Registered User Join Date: Mar 2007 Location: Denver, CO Posts: 247	Re: All most on the ground! PB Style Subscribed! __________________ Ryan 84 SWB, C4 IFS Crossmember, C4 IRS, RE7 bags, WCC 3pc 22"s My reBuild: http://67-72chevytrucks.com/vboard/s...d.php?t=346328

09-02-2009, 12:11 AM	#18
ShowSS12 Registered User Join Date: Apr 2008 Location: Sugarland,Tejas Posts: 356	Re: All most on the ground! PB Style badass..... where in houston are you? __________________ Adam M STX Designs Motorcycles \| Choppers \| Hotrods



Register or Log In To remove these advertisements.

09-02-2009, 12:04 AM	#20
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: All most on the ground! PB Style Bad azzzz. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-02-2009, 05:20 PM	#21
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: All most on the ground! PB Style Subscribed! __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

09-03-2009, 11:12 AM	#22
bigbadjohn84 Registered User Join Date: Feb 2008 Location: Florala, AL Posts: 398	Re: All most on the ground! PB Style are you serious? bolt on body drop? what is that like a complete custom frame??? I know there are some companies out there making complete frames to accomplish that.

Register or Log In To remove these advertisements.