Headlight aim procedure? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Keith Seymore · 09-01-2009, 06:26 AM

Anybody have a favorite headlight aiming procedure?

I'm familiar with where the adjustment screws are; I just don't remember how far away from a wall you are supposed to park and where the four beams should be positioned.

Thanks -

K

James McClure · 09-01-2009, 08:48 AM

Keith: Here in The peoples republic of NY, it's 25' and the "hotspot" cannot be any more than 8" above, below the centerline of the lamp or to the right of it and 0" to the left. Mine are set at L/S low, in one and down one inch. L/S high down 1 and 0. R/S, both lamps at 0. I switched the lamps to low in the bottom pocket and high in the top pocket. This works better on foggy nights. jim

3r!c84 · 09-11-2009, 08:54 PM

anyone i dont get this?
sorry im a little slow

**Thealien** · 09-11-2009, 09:36 PM

HERE YOU GO

09-01-2009, 06:26 AM	#1
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,226	Headlight aim procedure? Anybody have a favorite headlight aiming procedure? I'm familiar with where the adjustment screws are; I just don't remember how far away from a wall you are supposed to park and where the four beams should be positioned. Thanks - K __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/

09-01-2009, 08:48 AM	#2
James McClure One shot, one kill. Join Date: Dec 2007 Location: Saratoga Springs NY Posts: 859	Re: Headlight aim procedure? Keith: Here in The peoples republic of NY, it's 25' and the "hotspot" cannot be any more than 8" above, below the centerline of the lamp or to the right of it and 0" to the left. Mine are set at L/S low, in one and down one inch. L/S high down 1 and 0. R/S, both lamps at 0. I switched the lamps to low in the bottom pocket and high in the top pocket. This works better on foggy nights. jim __________________ 1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shotJim or Paladin whichever you choose.

09-11-2009, 08:54 PM	#3
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Headlight aim procedure? anyone i dont get this? sorry im a little slow __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

09-11-2009, 09:36 PM	#4
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Headlight aim procedure? HERE YOU GO



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.