Need some help ID'ing this 6 cyl ps setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 09-28-2009, 11:04 PM

I just hauled this truck in tonight, any ideas what year this PS setup is? I don't get much 6 cyl stuff so I don't know what year it is or how much the setup and pullies are worth? Any help is appreciated Thanks Randy

teeitup · 09-28-2009, 11:14 PM

more pics

**'68OrangeSunshine** · 09-29-2009, 05:58 AM

I think that's a 292. 6" tall lifter covers. 3-groove Harmonic Balancer. Motor mount forward of the fuel pump. Pre- '67 with the Chevrolet script on the valve cover, and blue flame six engine color. P/S gear for a 292 is rare.

PanelDeland · 09-29-2009, 06:58 AM

I agree^.Make sure you keep track of the pulleys.They sometimes get overlooked in a PS upgrade.

teeitup · 09-29-2009, 12:34 PM

Thanks guys, I was thinking it was a 292, didn't know for sure. Thanks Randy

teeitup · 09-29-2009, 09:36 PM

Well I got it all off except the crank shaft pulley, it has a key on it, I guess I'll have to find a puller to get it off

**lolife99** · 09-29-2009, 10:00 PM

Randy,... how much for all the pulleys, brackets, hoses, and pump,... shipped to 65251?
Don't really need it,... but if it's cheap enough I will take it off your hands.

pritch · 09-29-2009, 10:55 PM

Is it just a bad angle, or is it sitting on the wrong right-side tower?

**'68OrangeSunshine** · 09-30-2009, 04:17 AM

Quote:

Originally Posted by pritch

Is it just a bad angle, or is it sitting on the wrong right-side tower?

292s have that offset motor mounting. The passenger side mount is forward of the fuel pump. L6 250s/230s have symmetrical motor mounts. My guess is that GM did this with the 292 to counter act torque from the 1.75" taller engine. They had to have a good reason to necessitate this kind of production change, since it requires a special 292-only cam as well.
Unless it is a bad angle, too -- or maybe one or both the mounts are loose from what went on in the junkyard before he got it.

Hey Randy-- PM sent.

pritch · 09-30-2009, 11:03 PM

Quote:

Originally Posted by '68OrangeSunshine

292s have that offset motor mounting. The passenger side mount is forward of the fuel pump. L6 250s/230s have symmetrical motor mounts. My guess is that GM did this with the 292 to counter act torque from the 1.75" taller engine. They had to have a good reason to necessitate this kind of production change, since it requires a special 292-only cam as well.
Unless it is a bad angle, too -- or maybe one or both the mounts are loose from what went on in the junkyard before he got it.

Naw, what I meant was it looks like the motor mount is only sitting on about 1/2 of a 250 style tower. Gotta just be a wierd angle.

**PICKMUP** · 09-30-2009, 01:05 PM

Well put me in line, too. That is funky...I like it. LOL

teeitup · 10-01-2009, 11:20 PM

Well actually it has V8 motor stands and 6 cylinder mounts and the pass side motor stand has a bracket welded to it so it could sit in there

I tried pulling the pulley tonight but I do not have the right puller, I'm tryign to find one. I'll let you 2 know when I decide to sell it, or actually get it off. Thanks Randy

teeitup · 10-03-2009, 10:04 PM

got it off going on parts board in a bit. Keith your first, Frank is 2nd. Thanks Randy

09-28-2009, 11:04 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Need some help ID'ing this 6 cyl ps setup I just hauled this truck in tonight, any ideas what year this PS setup is? I don't get much 6 cyl stuff so I don't know what year it is or how much the setup and pullies are worth? Any help is appreciated Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-28-2009, 11:14 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Need some help ID'ing this 6 cyl ps setup more pics Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-29-2009, 05:58 AM	#3
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,537	Re: Need some help ID'ing this 6 cyl ps setup I think that's a 292. 6" tall lifter covers. 3-groove Harmonic Balancer. Motor mount forward of the fuel pump. Pre- '67 with the Chevrolet script on the valve cover, and blue flame six engine color. P/S gear for a 292 is rare. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 09-29-2009 at 06:08 AM.

09-29-2009, 06:58 AM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Need some help ID'ing this 6 cyl ps setup I agree^.Make sure you keep track of the pulleys.They sometimes get overlooked in a PS upgrade. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

09-29-2009, 12:34 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Need some help ID'ing this 6 cyl ps setup Thanks guys, I was thinking it was a 292, didn't know for sure. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-29-2009, 09:36 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Need some help ID'ing this 6 cyl ps setup Well I got it all off except the crank shaft pulley, it has a key on it, I guess I'll have to find a puller to get it off __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-29-2009, 10:00 PM	#7
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Need some help ID'ing this 6 cyl ps setup Randy,... how much for all the pulleys, brackets, hoses, and pump,... shipped to 65251? Don't really need it,... but if it's cheap enough I will take it off your hands. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

09-29-2009, 10:55 PM	#8
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: Need some help ID'ing this 6 cyl ps setup Is it just a bad angle, or is it sitting on the wrong right-side tower? __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

09-30-2009, 01:05 PM	#11
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Re: Need some help ID'ing this 6 cyl ps setup Well put me in line, too. That is funky...I like it. LOL

10-01-2009, 11:20 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Need some help ID'ing this 6 cyl ps setup Well actually it has V8 motor stands and 6 cylinder mounts and the pass side motor stand has a bracket welded to it so it could sit in there I tried pulling the pulley tonight but I do not have the right puller, I'm tryign to find one. I'll let you 2 know when I decide to sell it, or actually get it off. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-03-2009, 10:04 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Need some help ID'ing this 6 cyl ps setup got it off going on parts board in a bit. Keith your first, Frank is 2nd. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.