The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-29-2009, 10:10 AM   #1
71stub
Registered User
 
71stub's Avatar
 
Join Date: Mar 2008
Location: Forman, ND
Posts: 365
1960 V8 Swap Radiator Hose Question

I installed an 83 GMC crossmember in my 1960 short fleet and put a 350/700R4 in the truck. My question is what radiator hose will work on my application. I am using the stock 6 cylinder radiator along with a long water pump setup. I can use a flex hose for the upper but I am wondering if anybody has any done this and knows what they used for a lower. Thanks in advance.
__________________
1971 Cheyenne Short Fleet - 468BB/TH400, Tilt, Tach, PS, PB

1967 Custom Short Fleet - 327/4spd
71stub is offline   Reply With Quote
Old 09-29-2009, 01:14 PM   #2
jonzcustomshop
1961 crewcab
 
jonzcustomshop's Avatar
 
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
Re: 1960 V8 Swap Radiator Hose Question

My 64 (stock gm) uses a hard line-metal hose for the upper, can you just get a correct v8 rad hose for the lower from the parts store?
jonzcustomshop is offline   Reply With Quote
Old 09-29-2009, 01:53 PM   #3
71stub
Registered User
 
71stub's Avatar
 
Join Date: Mar 2008
Location: Forman, ND
Posts: 365
Re: 1960 V8 Swap Radiator Hose Question

The 6 cylinder radiator has the upper hose in the center of the radiator and not off to the drivers side like the factory V8 radiator. I am unsure if the lower outlet is in the same location as the V8 radiator and those trucks also came with a short water pump...
__________________
1971 Cheyenne Short Fleet - 468BB/TH400, Tilt, Tach, PS, PB

1967 Custom Short Fleet - 327/4spd
71stub is offline   Reply With Quote
Old 09-29-2009, 03:07 PM   #4
jchav62
1962 C-10
 
jchav62's Avatar
 
Join Date: Apr 2005
Location: Las Vegas, New Mexico
Posts: 4,978
Re: 1960 V8 Swap Radiator Hose Question

I think you can go to the parts store and ask for a hose for a 1960 with a 283. That's what I do for my '62. It has the upper hose in the center also. The offset radiators didn't come out until 63, I believe. 60-62's are in the center...v8 or 6.
__________________
Joseph Chavez
"See the USA in a Chevrolet!!"
......................_____
.........________//__{\_____
,,,,,,,/__(O)___//___/__(O)_/

1962 C10 Shortbed Fleetside 327/th350 GV overdrive
1974 C10 Longbed Fleetside 350/th350 "The Trash Truck"
1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4
2015 GMC Sierra SLE 1500 4x4

Last edited by jchav62; 09-29-2009 at 03:08 PM.
jchav62 is offline   Reply With Quote
Old 09-30-2009, 12:22 AM   #5
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: 1960 V8 Swap Radiator Hose Question

If you go with an original style upper hose, you will also have to use a straight thermostat housing and not the common angled thermostat housing. You might be able to use an original style lower hose, and just trim it a little to compensate for the long water pump.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 09-30-2009, 11:51 AM   #6
MacAttack
283 Drama Queen
 
MacAttack's Avatar
 
Join Date: Dec 2004
Location: Surf City, CA
Posts: 2,435
Re: 1960 V8 Swap Radiator Hose Question

Quote:
Originally Posted by jchav62 View Post
I think you can go to the parts store and ask for a hose for a 1960 with a 283.
That's exactly what I did, Hoser. I went with the Summit (aluminum) swivel thermostat cover and a 70' Monte Carlo upper hose. A small trim and it fit perfectly.
__________________
For about 12 years of my adult life I had a severe speech impediment.
My ex-wife never let me get a word in edgewise.
MacAttack is offline   Reply With Quote
Old 09-30-2009, 08:34 AM   #7
71stub
Registered User
 
71stub's Avatar
 
Join Date: Mar 2008
Location: Forman, ND
Posts: 365
Re: 1960 V8 Swap Radiator Hose Question

I have the center thermostat housing and the radiator is out of a 62 with a 6 cyl and has the outlet in the center also. A flex hose for the upper will work fine and I will see if the lower will work once its trimmed.
__________________
1971 Cheyenne Short Fleet - 468BB/TH400, Tilt, Tach, PS, PB

1967 Custom Short Fleet - 327/4spd
71stub is offline   Reply With Quote
Old 09-30-2009, 01:47 PM   #8
cliffy
Registered User
 
Join Date: Oct 2006
Location: Canada
Posts: 60
Re: 1960 V8 Swap Radiator Hose Question

my 60 has a v8 in there now with a stock lower hose.
__________________
my o/l says the truck has a vibration at 65 mph..I said its ok, it goes away at 90.
cliffy is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:38 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com