|
09-30-2009, 07:59 PM | #1 |
The Beach Cruiser
Join Date: May 2009
Location: Panama City, Florida
Posts: 358
|
steering column 66
Are the upper and lower bearings easy to find for the steering shaft? I have mine apart and would like to replace before installing. Thanks
__________________
1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed |
09-30-2009, 09:30 PM | #2 |
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,442
|
Re: steering column 66
|
09-30-2009, 10:43 PM | #3 |
The Beach Cruiser
Join Date: May 2009
Location: Panama City, Florida
Posts: 358
|
Re: steering column 66
Thanks DPowes. Found it. Last question. Is it pressed in and how does one remove it?
__________________
1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed |
10-01-2009, 02:39 PM | #4 |
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,442
|
Re: steering column 66
I don't think they are pressed in.
|
10-01-2009, 03:23 PM | #5 |
Account Suspended
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
|
Re: steering column 66
They are pressed-on...with a little gentle persuasion, they come off. Good luck and let us know how it works out.
|
10-01-2009, 10:31 PM | #6 |
The Beach Cruiser
Join Date: May 2009
Location: Panama City, Florida
Posts: 358
|
Re: steering column 66
Thanks Tony, Glad to see your back. Today was my Birthday. My wife said I could do whatever I wanted. Go any where,do anything, so I choose to replace my steering column with one I bought from LILRED. First time installing and it went great.I pulled the truck in the carport and smelt gas. After looking under the hood, gas was dripping from the inline filter onto the exhaust manifold. NOT COOL. I read a post awhile back and saw the results. I will finish the filter replacement tomorrow.
__________________
1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed |
Bookmarks |
|
|