|
|
|
10-06-2009, 01:55 PM
|
#1 |
|
Super Trucker
Join Date: May 2005
Location: Newnan, Georgia
Posts: 201
|
p/s swap question
I've looked in the FAQ (maybe not as thoroughly as i should have) I'm wondering if the GM p/s gearboxes are interchangeable? For example would I be able to take the gearbox out of my 2nd gen camaro and put in my '72 c/10? Is it possible to grab one off a later IROC? I'd like a quick ratio box without going into a lot of hassle. the pitman arm is different between the manual steering and power steering. what about the connection to the steering column? Thanks for helping out with my homework!
__________________
American by birth, Southern by the grace of God. ".. you aint just whistlin' Dixie..." Rebel till I die |
|
|
|
10-06-2009, 03:49 PM
|
#2 |
|
Texas Big Wig
Join Date: Jan 2007
Location: Mineola, Texas
Posts: 5,620
|
Re: p/s swap question
I know that a lot of cars have the box on the inside of the frame & these trucks have it on the outside
I would also expect the bolt pattern to be different So in short, prolly not without modification 
|
|
|
|
|
10-11-2009, 11:24 AM
|
#3 |
|
Super Trucker
Join Date: May 2005
Location: Newnan, Georgia
Posts: 201
|
Re: p/s swap question
alright.. thanks. so where could i find a quick ratio box with a budget?
__________________
American by birth, Southern by the grace of God. ".. you aint just whistlin' Dixie..." Rebel till I die |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
