CO Have parts off a 68 C10 for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shaneo2112RUSH · 10-15-2009, 02:16 AM

Seeing if anyone is interested in these parts im not going to use for my project!! most of the front and rear suspension, front brake drum, heater core, blower motor, were new and on the pickup for about a year before tearing her down and still in great condition. I hate to see these parts on the shelf collecting dust, rust, and no being used!

please ask: any questions, or better pics (which my cell phone camera sucks!)

I will be willing to ship all the items at buyers cost!! please give me a day or two to get a box and shipping quotes for you!! I do take paypal

Zbar, and T-5 trans mount $5.00ea.+ship.
As far as the two middle suspension parts(sorry brain fart right now, can't remember the names) larger peice $15.00+ship and smaller $5.00+ship both have surface rust and small hammer dings but in good shape!
Two pair of stock upper control arms $20.00pr+ship One Pair SOLD to mup123
Slightly used front 6lug brake drum. Has no lip or ever seen a lathe machine. I have two. the other is still on the truck, i have to check the condition on the other $25.00ea+ship
Heatercore SOLD to ScottH
Heater box $10.00+ship
Heater motor $5.00+shipSOLD to Faribran
Stock height front and rear coil springs $75.00all4+ship
Name: Photo0105 (642 x 482).jpg
Views: 1740
Size: 39.3 KB

Name: Photo0105 (642 x 482).jpg
Views: 1740
Size: 39.3 KB

Name: Photo0104 (642 x 482).jpg
Views: 1790
Size: 34.8 KB

Name: Photo0103 (642 x 482).jpg
Views: 1718
Size: 29.3 KB

Name: Photo0102 (642 x 482).jpg
Views: 1703
Size: 36.9 KB

Name: Photo0101 (642 x 482).jpg
Views: 1807
Size: 42.7 KB

67 chevy heaven · 10-15-2009, 08:11 PM

I may be interested in the heater core box assy. What condition is the heater core in? What would the shipping be to zip 29745

shaneo2112RUSH · 10-16-2009, 01:34 AM

Some More Stuff!!
Used upper and lower control arm shafts still in good codition!! Upper, $25.00pr+ship, lower $35.00pr+ship, or upper and lower 55.00+shipSOLD to stealthy '69
Used inner and outer tie rod ends $25.00 for both+ship.SOLD to 1968CHEVYC10
Small Block L&R engine mount $15.00pr+ship. SOLD to 68 C-10 Panel
Monroe Sensatrac Shocks, front&rear $45.00all4+ship.
Used 2 piece rear main seal flywheel, 10 spline clutch, and flexplate $65.00+ship
Used 2 piece rear main seal flywheel, 26 spline clutch, and flexplate. Fits Camaro T-5 5 speed Borg Warner transmission.$65.00+ship
Name: Photo0096 (642 x 482).jpg
Views: 1871
Size: 37.7 KB

Name: Photo0096 (642 x 482).jpg
Views: 1871
Size: 37.7 KB

Name: Photo0100 (642 x 482).jpg
Views: 1915
Size: 38.9 KB

Name: Photo0090 (642 x 482).jpg
Views: 1804
Size: 40.6 KB

Name: Photo0098 (642 x 482).jpg
Views: 1879
Size: 37.7 KB

stealthy '69 · 10-24-2009, 03:48 AM

Quote:

Originally Posted by shaneo2112RUSH

Used upper and lower control arm shafts still in good codition!! Upper, $25.00pr+ship, lower $35.00pr+ship, or upper and lower 55.00+ship.

I'm very interested in the control arm shafts. Can you get a total with shipping to 68134?

68 C-10 Panel · 10-24-2009, 02:11 PM

I would like to get my hands on those small block engine mounts. As long as the shipping to 48135 wont break the bank. I am also looking for the auto trans crossmember if you happen to have one layin around. just got my hands on a 350sbc/700r4 combo and those should help with the proper install.

shaneo2112RUSH · 10-24-2009, 09:28 PM

Quote:

Originally Posted by 68 C-10 Panel

I would like to get my hands on those small block engine mounts. As long as the shipping to 48135 wont break the bank. I am also looking for the auto trans crossmember if you happen to have one layin around. just got my hands on a 350sbc/700r4 combo and those should help with the proper install.

i have no auto trans member! i had to custom make a member for my T-5 5 speed. let me see if my buddy has one he dont want!

shaneo2112RUSH · 10-24-2009, 09:25 PM

Quote:

Originally Posted by stealthy '69

I'm very interested in the control arm shafts. Can you get a total with shipping to 68134?

will do!!

shaneo2112RUSH · 11-13-2009, 02:50 AM

ttt

mup123 · 11-06-2009, 09:11 AM

Quote:

Originally Posted by shaneo2112RUSH

Some More Stuff!!
Used upper and lower control arm shafts still in good codition!! Upper, $25.00pr+ship, lower $35.00pr+ship, or upper and lower 55.00+shipSOLD to stealthy '69
Used inner and outer tie rod ends $25.00 for both+ship.SOLD to 1968CHEVYC10
Small Block L&R engine mount $15.00pr+ship. Pending sale to 68 C-10 Panel
Monroe Sensatrac Shocks, front&rear $45.00all4+ship.
Used 2 piece rear main seal flywheel, 10 spline clutch, and flexplate $65.00+ship
Used 2 piece rear main seal flywheel, 26 spline clutch, and flexplate. Fits Camaro T-5 5 speed Borg Warner transmission.$65.00+ship
Attachment 506251

Attachment 506252

Attachment 506253

Attachment 506255

How much for the 2 upper control arms shipped Fedex ground to 27028
Thanks,
John Dooling

shaneo2112RUSH · 11-07-2009, 12:01 PM

ttt

shaneo2112RUSH · 11-08-2009, 10:51 PM

Faribran and mup123 PM'd

shaneo2112RUSH · 10-16-2009, 01:42 AM

Quote:

Originally Posted by 67 chevy heaven

I may be interested in the heater core box assy. What condition is the heater core in? What would the shipping be to zip 29745

I bought the heater core new from summit racing about 2 years ago and installed it myself. It worked great when it was in the truck!! The box assembly does have cracks in the fiberglass but i will get closer pics and shipping info for you.

Thanks
Shane V

shaneo2112RUSH · 10-16-2009, 11:43 PM

Quote:

Originally Posted by 67 chevy heaven

i may be interested in the heater core box assy. What condition is the heater core in? What would the shipping be to zip 29745

$14.16 shipping cost to 29745 by USPS. i had no problems with the heater core with leakes, or heating problems. worked very nice when it was in the truck!!

Name: cracked outlet.gif
Views: 119
Size: 89.5 KB

Name: cracked outlet.gif
Views: 119
Size: 89.5 KB

Name: cracked bolt hole.jpg
Views: 119
Size: 26.8 KB

Name: heatercore.jpg
Views: 117
Size: 33.1 KB

Name: blowerfan.jpg
Views: 117
Size: 26.2 KB

**ScottH** · 10-17-2009, 09:50 AM

interested in just the heater core if u want to separate.

thanks

scott

shaneo2112RUSH · 10-17-2009, 01:17 PM

Quote:

Originally Posted by ScottH

interested in just the heater core if u want to separate.

thanks

scott

i have one guy interested in it right now! and I would like to sell as one unit but if don't sell I will seperate!!

CoachSwin · 10-17-2009, 02:05 PM

How much for all 4 shocks and coils shipped to 39565.

I'm sure they are but gotta ask, are shocks for stock height?

shaneo2112RUSH · 10-17-2009, 06:50 PM

Quote:

Originally Posted by CoachSwin

How much for all 4 shocks and coils shipped to 39565.

I'm sure they are but gotta ask, are shocks for stock height?

They are stock height! plus i have coil cups if interested too. I will get quote tommorow since they are closed right now!!

thanks

shaneo2112RUSH · 10-17-2009, 10:39 PM

67 heaven chevy passed on the heater unit.
scotth next inline on just the heater core
coachswin inline for springs and shocks

**ScottH** · 10-20-2009, 01:04 PM

I'll take the idler arm also

thanks

scott

shaneo2112RUSH · 10-21-2009, 01:32 AM

ttt

shaneo2112RUSH · 10-23-2009, 12:33 AM

ttt!! Make me an offer on any parts!!

70rs/ss · 10-23-2009, 01:12 PM

I am interested in a bunch of stuff, but not sure what is left? Coil springs, just need the rears? Maybe the 10-spine clutch and flywheel, I'll PM for the rest. I am in AZ so I can pick up maybe or just have them shipped this way!

shaneo2112RUSH · 10-23-2009, 05:48 PM

Quote:

Originally Posted by 70rs/ss

I am interested in a bunch of stuff, but not sure what is left? Coil springs, just need the rears? Maybe the 10-spine clutch and flywheel, I'll PM for the rest. I am in AZ so I can pick up maybe or just have them shipped this way!

everything is still for sale except heater core and idler arm!

1968CHEVYC10 · 10-23-2009, 06:01 PM

I'll take the tie rods assuming they'll fit my stock '68 drum spindles?

shaneo2112RUSH · 10-23-2009, 08:22 PM

Quote:

Originally Posted by 1968CHEVYC10

I'll take the tie rods assuming they'll fit my stock '68 drum spindles?

yes, they shouold fit a 68'. mine were stock drums also!! shoot me your zip and ill will give you a shipping quote

10-15-2009, 02:16 AM	#1
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Make an offer! Have parts off a 68 C10 for sale Seeing if anyone is interested in these parts im not going to use for my project!! most of the front and rear suspension, front brake drum, heater core, blower motor, were new and on the pickup for about a year before tearing her down and still in great condition. I hate to see these parts on the shelf collecting dust, rust, and no being used! please ask: any questions, or better pics (which my cell phone camera sucks!) I will be willing to ship all the items at buyers cost!! please give me a day or two to get a box and shipping quotes for you!! I do take paypal Zbar, and T-5 trans mount $5.00ea.+ship. As far as the two middle suspension parts(sorry brain fart right now, can't remember the names) larger peice $15.00+ship and smaller $5.00+ship both have surface rust and small hammer dings but in good shape! Two pair of stock upper control arms $20.00pr+ship One Pair SOLD to mup123 Slightly used front 6lug brake drum. Has no lip or ever seen a lathe machine. I have two. the other is still on the truck, i have to check the condition on the other $25.00ea+ship Heatercore SOLD to ScottH Heater box $10.00+ship Heater motor $5.00+shipSOLD to Faribran Stock height front and rear coil springs $75.00all4+ship __________________ 1968 LWB C10 "Project LADY EYE SORE" (She is my baby and sent me to the hospital 3 times for eye injuries lol) who said love hurts?? Last edited by shaneo2112RUSH; 11-12-2009 at 01:43 PM.

10-15-2009, 08:11 PM	#2
67 chevy heaven Registered User Join Date: Jul 2009 Location: york, SC Posts: 223	Re: Have parts off a 68 C10 for sale I may be interested in the heater core box assy. What condition is the heater core in? What would the shipping be to zip 29745

10-16-2009, 01:34 AM	#3
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: Have parts off a 68 C10 for sale Some More Stuff!! Used upper and lower control arm shafts still in good codition!! Upper, $25.00pr+ship, lower $35.00pr+ship, or upper and lower 55.00+shipSOLD to stealthy '69 Used inner and outer tie rod ends $25.00 for both+ship.SOLD to 1968CHEVYC10 Small Block L&R engine mount $15.00pr+ship. SOLD to 68 C-10 Panel Monroe Sensatrac Shocks, front&rear $45.00all4+ship. Used 2 piece rear main seal flywheel, 10 spline clutch, and flexplate $65.00+ship Used 2 piece rear main seal flywheel, 26 spline clutch, and flexplate. Fits Camaro T-5 5 speed Borg Warner transmission.$65.00+ship __________________ 1968 LWB C10 "Project LADY EYE SORE" (She is my baby and sent me to the hospital 3 times for eye injuries lol) who said love hurts?? Last edited by shaneo2112RUSH; 11-07-2009 at 02:31 AM.

10-24-2009, 02:11 PM	#5
68 C-10 Panel Registered User Join Date: Apr 2009 Location: MI Posts: 88	Re: Have parts off a 68 C10 for sale I would like to get my hands on those small block engine mounts. As long as the shipping to 48135 wont break the bank. I am also looking for the auto trans crossmember if you happen to have one layin around. just got my hands on a 350sbc/700r4 combo and those should help with the proper install.

11-13-2009, 02:50 AM	#8
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: Have parts off a 68 C10 for sale ttt __________________ 1968 LWB C10 "Project LADY EYE SORE" (She is my baby and sent me to the hospital 3 times for eye injuries lol) who said love hurts??

11-07-2009, 12:01 PM	#10
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: Have parts off a 68 C10 for sale ttt __________________ 1968 LWB C10 "Project LADY EYE SORE" (She is my baby and sent me to the hospital 3 times for eye injuries lol) who said love hurts??

11-08-2009, 10:51 PM	#11
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: Have parts off a 68 C10 for sale Faribran and mup123 PM'd __________________ 1968 LWB C10 "Project LADY EYE SORE" (She is my baby and sent me to the hospital 3 times for eye injuries lol) who said love hurts??

10-17-2009, 09:50 AM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Have parts off a 68 C10 for sale interested in just the heater core if u want to separate. thanks scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-17-2009, 02:05 PM	#16
CoachSwin Registered User Join Date: Oct 2009 Location: Biloxi, MS Posts: 44	Re: Have parts off a 68 C10 for sale How much for all 4 shocks and coils shipped to 39565. I'm sure they are but gotta ask, are shocks for stock height? __________________ 69 Chevy C10 SWB Stepside 350 SBC 700r4

10-17-2009, 10:39 PM	#18
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: Have parts off a 68 C10 for sale 67 heaven chevy passed on the heater unit. scotth next inline on just the heater core coachswin inline for springs and shocks __________________ 1968 LWB C10 "Project LADY EYE SORE" (She is my baby and sent me to the hospital 3 times for eye injuries lol) who said love hurts??

10-20-2009, 01:04 PM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Have parts off a 68 C10 for sale I'll take the idler arm also thanks scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-21-2009, 01:32 AM	#20
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: Have parts off a 68 C10 for sale ttt __________________ 1968 LWB C10 "Project LADY EYE SORE" (She is my baby and sent me to the hospital 3 times for eye injuries lol) who said love hurts??

10-23-2009, 12:33 AM	#21
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: Have parts off a 68 C10 for sale ttt!! Make me an offer on any parts!! __________________ 1968 LWB C10 "Project LADY EYE SORE" (She is my baby and sent me to the hospital 3 times for eye injuries lol) who said love hurts??

10-23-2009, 01:12 PM	#22
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: Have parts off a 68 C10 for sale I am interested in a bunch of stuff, but not sure what is left? Coil springs, just need the rears? Maybe the 10-spine clutch and flywheel, I'll PM for the rest. I am in AZ so I can pick up maybe or just have them shipped this way!

10-23-2009, 06:01 PM	#24
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Re: Have parts off a 68 C10 for sale I'll take the tie rods assuming they'll fit my stock '68 drum spindles? __________________ '68 C10 LWB 6.2NA/NP833 3.73's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.