My My My.....Daddy likes!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LOHRTBT · 01-20-2003, 02:16 PM

http://www.sallee-chevrolet.com/Sneak/Previews.html
Scroll down for pure ecstacy!!

Razorback_Fan · 01-20-2003, 02:42 PM

I would love to have that maybe someday...............

low 84 · 01-20-2003, 02:45 PM

which one the 9:1 with hydro roller or the 12:1 with mech. roller?

85Silverado · 01-20-2003, 02:51 PM

ooooooooooooooooooooooo.....i want the 12:1...some one buy 4 for me....i want to make a push me/pull me pickup...hehe and have 2 spare engines..hehe :-D

LOHRTBT · 01-20-2003, 02:56 PM

I would take either..but would go lower cr so more streetable on low octane fuel

low 84 · 01-20-2003, 03:28 PM

Quote:

Originally posted by LOHRTBT
I would take either..but would go lower cr so more streetable on low octane fuel

that exactly what i was thinking. i'd get the 9:1 with hydro roller that runs on 92 octane. and drive it everyday, rather than have to run race fuel.

BigRed · 01-20-2003, 03:43 PM

Nice, but I wonder how much they're going to charge for these? $6000+ ?

Bitter Beard · 01-20-2003, 03:59 PM

That engine looks awesome, and 6k price tag? Ouch!

LOHRTBT · 01-20-2003, 04:04 PM

Im sure they will be at least that

**swervin ervin** · 01-20-2003, 05:16 PM

Nice, but damn, who needs something like that in a truck? You'll not get one of those for 6 grand. Better start thinking closer to 10.

Did you notice the carb? Can we say you will be lucky to get 4 or 5 mpg?

LOHRTBT · 01-20-2003, 06:52 PM

lol Mike....I agree...why do we need that in a truck??? hehe why not!! LMAO!!

That would be for my truck if it was a trailer queen baby that only gets driven a couple times a month!! lol

79BIG10 · 01-21-2003, 02:36 AM

I wish I had the 9.2:1 for sure over the race one. Heck add a 100 shot of NOS then you got teh same HP but torque is close and still running 92 octane. I agree I bet $8-10K each easy!!! Wonder if I can get the VW sold, buy a burb and place ZZ4 in the burb then get the ZZ572 in my truck

Now where did I leave that winning lotto ticket at?

raceman6135 · 01-21-2003, 02:51 AM

For anyone who's curious about the cost of the 12:1 cr 572 CID 720 horsepower big block, check out Reher - Morrison Racing Engines web site, click on the "Super Series 509" on the left side navigation bar, and check their price.

Granted, the R-M 509 puts out 805 horsepower from a smaller engine so therefore will have more "race" parts, it'll give you an idea about how much we drag racers will spend!

DJS

In case you can't/don't want to check out R-M, their price is $11,995.00 delivered.

79Silv4x4 · 01-21-2003, 06:03 AM

Quote:

Originally posted by raceman6135
For anyone who's curious about the cost of the 12:1 cr 572 CID 720 horsepower big block, check out Reher - Morrison Racing Engines web site, click on the "Super Series 509" on the left side navigation bar, and check their price.

DJS

In case you can't/don't want to check out R-M, their price is $11,995.00 delivered.

Man, check out the price on their 572--that's some serious cash to lay out.

Izzy · 01-21-2003, 09:10 AM

I'll buy that for a dollar.

SCOTI · 01-21-2003, 03:10 PM

I'm not sure where I heard it (might have been on Trucks TV), but I believe the 572 will go for around 14K. That's alot of dough.

LOHRTBT · 01-21-2003, 04:22 PM

screw that!! hahaha

Tom · 01-21-2003, 04:29 PM

Did you guys check out the specs on that 12:1 motor? The .050 cam specs are MASSIVE. Dont expect to get your vehicle moving if the revs are under 2000rpm with that thing. Thats a race only motor. For the cash, anyone of you guys could build a bigger, badder, more powerfull motor.

Myride · 01-22-2003, 03:29 AM

cool

apstguy · 01-22-2003, 11:29 PM

::drools:: Oops! ::wipes drool up:: sorry...

01-20-2003, 02:16 PM	#1
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	My My My.....Daddy likes!!! http://www.sallee-chevrolet.com/Sneak/Previews.html Scroll down for pure ecstacy!! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

01-20-2003, 02:45 PM	#3
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	which one the 9:1 with hydro roller or the 12:1 with mech. roller? __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

01-20-2003, 02:51 PM	#4
85Silverado Registered User Join Date: Dec 2002 Location: Milwaukee, Wisconsin Posts: 198	ooooooooooooooooooooooo.....i want the 12:1...some one buy 4 for me....i want to make a push me/pull me pickup...hehe and have 2 spare engines..hehe :-D __________________ Paul D. '78 C20 Scottsdale 350ci 3 speed with granny gear 14 bolt rearend My trucks are "Car-Guy safe".......which pretty much means death trap in the hands of a normal civilian.

01-20-2003, 02:56 PM	#5
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	I would take either..but would go lower cr so more streetable on low octane fuel __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

01-20-2003, 03:43 PM	#7
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Nice, but I wonder how much they're going to charge for these? $6000+ ? __________________ Scott Shelbourne

01-20-2003, 02:42 PM	#2
Razorback_Fan Registered User Join Date: Nov 2002 Location: Katy Tx Posts: 188	I would love to have that maybe someday...............

01-20-2003, 03:59 PM	#8
Bitter Beard Registered User Join Date: Jan 2003 Location: AZ Posts: 27	That engine looks awesome, and 6k price tag? Ouch!

01-20-2003, 04:04 PM	#9
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Im sure they will be at least that __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

01-20-2003, 05:16 PM	#10
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Nice, but damn, who needs something like that in a truck? You'll not get one of those for 6 grand. Better start thinking closer to 10. Did you notice the carb? Can we say you will be lucky to get 4 or 5 mpg? __________________ Mike 1985 Chevy C-10

01-20-2003, 06:52 PM	#11
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	lol Mike....I agree...why do we need that in a truck??? hehe why not!! LMAO!! That would be for my truck if it was a trailer queen baby that only gets driven a couple times a month!! lol __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

01-21-2003, 02:36 AM	#12
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	I wish I had the 9.2:1 for sure over the race one. Heck add a 100 shot of NOS then you got teh same HP but torque is close and still running 92 octane. I agree I bet $8-10K each easy!!! Wonder if I can get the VW sold, buy a burb and place ZZ4 in the burb then get the ZZ572 in my truck Now where did I leave that winning lotto ticket at? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

01-21-2003, 02:51 AM	#13
raceman6135 Dino burner Join Date: Nov 2002 Location: Calgary, Alberta, Canada Posts: 602	For anyone who's curious about the cost of the 12:1 cr 572 CID 720 horsepower big block, check out Reher - Morrison Racing Engines web site, click on the "Super Series 509" on the left side navigation bar, and check their price. Granted, the R-M 509 puts out 805 horsepower from a smaller engine so therefore will have more "race" parts, it'll give you an idea about how much we drag racers will spend! DJS In case you can't/don't want to check out R-M, their price is $11,995.00 delivered.

01-21-2003, 09:10 AM	#15
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	I'll buy that for a dollar.

01-21-2003, 03:10 PM	#16
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	I'm not sure where I heard it (might have been on Trucks TV), but I believe the 572 will go for around 14K. That's alot of dough. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-21-2003, 04:22 PM	#17
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	screw that!! hahaha __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84



Register or Log In To remove these advertisements.

01-21-2003, 04:29 PM	#18
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	Did you guys check out the specs on that 12:1 motor? The .050 cam specs are MASSIVE. Dont expect to get your vehicle moving if the revs are under 2000rpm with that thing. Thats a race only motor. For the cash, anyone of you guys could build a bigger, badder, more powerfull motor. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

01-22-2003, 03:29 AM	#19
Myride Registered User Join Date: Mar 2002 Location: Pacific Northwest Posts: 292	cool

01-22-2003, 11:29 PM	#20
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	::drools:: Oops! ::wipes drool up:: sorry... __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

Register or Log In To remove these advertisements.