CA Parting Out 80 GMC 15 SB 2WD* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 11-20-2009, 09:03 PM

I got this truck for the short bed. The truck is in bad shape. Its a 6 cylinder 250 with a 3 speed manual trans. This truck came stripped down so much that GM didn't bother to include a spid sheet! The interior is thrashed, the wiring harness is hacked, and the body is beat. Let me know if there is any parts you need. Thanks, Ray
engine/tranny $50 local pick up
front suspension $50 local pick up
3 row radiator $40 plus shipping
6 cylinder HEI $40 shipped
carb $35 shipped

ECU PIRATE · 11-20-2009, 10:11 PM

What can you do on the clutch / brake pedal assembly & all of the linkage shipped to 20121?

Thanks,

Mike

KrazyRay · 11-20-2009, 10:50 PM

Quote:

Originally Posted by ECU PIRATE

What can you do on the clutch / brake pedal assembly & all of the linkage shipped to 20121?

Thanks,

Mike

Mike, I can do $60 shipped for all of the parts, but I think the return springs might be missing. Thanks, Ray

ECU PIRATE · 11-23-2009, 01:02 PM

Quote:

Originally Posted by KrazyRay

Mike, I can do $60 shipped for all of the parts, but I think the return springs might be missing. Thanks, Ray

Thanks Krazy Ray. How much could you do on the following ( I had to add some more to the list):

Brake & clutch pedal assembly w/ linkage
Z bar bracket
Z bar or bell crank (depending on which terminology you use)
Frame side and block side ball studs
Clutch pedal & Z bar or Clutch fork return springs
Upper & Lower push rods

Mike

KrazyRay · 11-24-2009, 12:05 AM

Quote:

Originally Posted by ECU PIRATE

Thanks Krazy Ray. How much could you do on the following ( I had to add some more to the list):

Brake & clutch pedal assembly w/ linkage
Z bar bracket
Z bar or bell crank (depending on which terminology you use)
Frame side and block side ball studs
Clutch pedal & Z bar or Clutch fork return springs
Upper & Lower push rods

Mike

Mike, no problem on the upper and lower push rods, z bars, etc. I just want to make sure you get everything you need to make it happen. Price is still $60 shipped. Thanks, Ray

ECU PIRATE · 11-25-2009, 10:03 AM

Quote:

Originally Posted by KrazyRay

Mike, no problem on the upper and lower push rods, z bars, etc. I just want to make sure you get everything you need to make it happen. Price is still $60 shipped. Thanks, Ray

Thanks KrazyRay. PM sent

Mr79C10 · 11-21-2009, 06:24 AM

Hood release,, in or out?

Heater blower motor,,
Im in 32257

bigblock73 · 11-21-2009, 10:38 AM

I assume because it is a CA truck, the frame is pretty clean? If so, and if you can pull it easily enough, I would be very interested in the frame crossrail assembly that is directly behind the cab...you can see a part of it in the pic below (off my 73 truck). How much do you need for it, and how much would shipping be to 55448? I know the one in my 77 is shot, and I might not need the entire thing...might just need to supports...but I will have to crawl under and take a look. Please let me know if you are OK with pulling it, or part of it and shipping it to MN. Thank you.

KrazyRay · 11-21-2009, 11:29 AM

bigblock73 Jeff, I have a local guy interested in the frame. I won't know for a week. Thanks, Ray

bigblock73 · 11-21-2009, 02:58 PM

Quote:

Originally Posted by KrazyRay

bigblock73 Jeff, I have a local guy interested in the frame. I won't know for a week. Thanks, Ray

OK, thanks...if something changes, please let me know.

You said the wiring is hacked...is the interior wiring hacked, or is it the exterior wiring?

KrazyRay · 11-21-2009, 04:38 PM

Quote:

Originally Posted by bigblock73

OK, thanks...if something changes, please let me know.

You said the wiring is hacked...is the interior wiring hacked, or is it the exterior wiring?

Jeff, The wiring is spliced at the radio and they put in a kill switch under the dash, on the outside, there are some wires fried above the brake m/c. The wires going out to the core support look good. Thanks, Ray

KrazyRay · 11-21-2009, 11:24 AM

Quote:

Originally Posted by Mr79C10

Hood release,, in or out?

Heater blower motor,,
Im in 32257

The hood release is outside. I can do $40 shipped for everything (blower motor, outside release/latch assembly). Thanks, Ray

Mr79C10 · 11-22-2009, 08:16 AM

Quote:

Originally Posted by KrazyRay

The hood release is outside. I can do $40 shipped for everything (blower motor, outside release/latch assembly). Thanks, Ray

Dont need (outside release/latch assembly). Im looking for the upper plate so I can install the hood release inside the cab.

Thanks

KrazyRay · 11-22-2009, 10:43 AM

Quote:

Originally Posted by Mr79C10

Dont need (outside release/latch assembly). Im looking for the upper plate so I can install the hood release inside the cab.

Thanks

I'll be happy to sell the upper plate on this truck or if you need a later model, I have one on my 86 GMC with an inside release. Thanks, Ray

Scootin 81 C20 · 11-21-2009, 02:10 PM

How much for the cigarette lighter to 61338?

KrazyRay · 11-21-2009, 04:28 PM

Quote:

Originally Posted by Scootin 81 C20

How much for the cigarette lighter to 61338?

If you buy the seat belts, I'll throw in the lighter for free...other wise $7 shipped. Sorry about the delay in the belt mount pic. I will post it here. Thanks, Ray

bigblock73 · 11-21-2009, 11:10 PM

Ray, I would be interested in the entire INTERIOR wiring harness if you can pull it with out damaging it any more than it already is. I need the fuseblock and all. I do not need the engine compartment side of things. Please let me know, and the price too please.

Thank you for the pictures!

KrazyRay · 11-21-2009, 11:43 PM

Quote:

Originally Posted by bigblock73

Ray, I would be interested in the entire INTERIOR wiring harness if you can pull it with out damaging it any more than it already is. I need the fuseblock and all. I do not need the engine compartment side of things. Please let me know, and the price too please.

Thank you for the pictures!

I will sell all of the interior with fuse block for $40 shipped. Thanks, Ray

bigblock73 · 11-22-2009, 12:34 AM

Quote:

Originally Posted by KrazyRay

I will sell all of the interior with fuse block for $40 shipped. Thanks, Ray

You have a deal. Let me know when you get it pulled and how you would like payment. I would prefer to pay once it is pulled and ready to ship, in case anything happens or the harness is damaged more than you currently know about....let me know if that is OK. Thanks.

KrazyRay · 11-22-2009, 12:47 AM

Quote:

Originally Posted by bigblock73

You have a deal. Let me know when you get it pulled and how you would like payment. I would prefer to pay once it is pulled and ready to ship, in case anything happens or the harness is damaged more than you currently know about....let me know if that is OK. Thanks.

When I get it pulled, I will post pics and let you know. Thanks, Ray

Eighty-6 · 11-22-2009, 08:42 AM

Does it have both Sport mirrors? If so do they have any pitting? If in very good condition how much shipped to 78665?

KrazyRay · 11-22-2009, 10:49 AM

Quote:

Originally Posted by Eighty-6

Does it have both Sport mirrors? If so do they have any pitting? If in very good condition how much shipped to 78665?

There is only the left side mirror. It is in good condition with light to medium pitting $20 shipped.

Eighty-6 · 11-24-2009, 11:29 PM

Quote:

Originally Posted by KrazyRay

There is only the left side mirror. It is in good condition with light to medium pitting $20 shipped.

Thanks but I'm looking for a pair. I'll pass for now but if you ever come across a pair in good condition please keep me in mind.

*BGRAFX* · 11-22-2009, 10:00 AM

Awe you beat me to the mirrors.

Scootin 81 C20 · 11-22-2009, 09:40 PM

Ray, the belts will work, I just gotta sell my non-truck fitting Suburban bucket seat belts first.

11-20-2009, 09:03 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting Out 80 GMC 15 SB 2WD* I got this truck for the short bed. The truck is in bad shape. Its a 6 cylinder 250 with a 3 speed manual trans. This truck came stripped down so much that GM didn't bother to include a spid sheet! The interior is thrashed, the wiring harness is hacked, and the body is beat. Let me know if there is any parts you need. Thanks, Ray engine/tranny $50 local pick up front suspension $50 local pick up 3 row radiator $40 plus shipping 6 cylinder HEI $40 shipped carb $35 shipped Attached Images

11-20-2009, 10:11 PM	#2
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: Parting Out 80 GMC 15 SB 2WD What can you do on the clutch / brake pedal assembly & all of the linkage shipped to 20121? Thanks, Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

11-21-2009, 06:24 AM	#7
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: Parting Out 80 GMC 15 SB 2WD Hood release,, in or out? Heater blower motor,, Im in 32257 __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den

11-21-2009, 10:38 AM	#8
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Parting Out 80 GMC 15 SB 2WD I assume because it is a CA truck, the frame is pretty clean? If so, and if you can pull it easily enough, I would be very interested in the frame crossrail assembly that is directly behind the cab...you can see a part of it in the pic below (off my 73 truck). How much do you need for it, and how much would shipping be to 55448? I know the one in my 77 is shot, and I might not need the entire thing...might just need to supports...but I will have to crawl under and take a look. Please let me know if you are OK with pulling it, or part of it and shipping it to MN. Thank you. Attached Images __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 11-21-2009 at 10:38 AM.

11-21-2009, 11:29 AM	#9
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 80 GMC 15 SB 2WD bigblock73 Jeff, I have a local guy interested in the frame. I won't know for a week. Thanks, Ray

11-21-2009, 02:10 PM	#15
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting Out 80 GMC 15 SB 2WD How much for the cigarette lighter to 61338? __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

11-21-2009, 11:10 PM	#17
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Parting Out 80 GMC 15 SB 2WD Ray, I would be interested in the entire INTERIOR wiring harness if you can pull it with out damaging it any more than it already is. I need the fuseblock and all. I do not need the engine compartment side of things. Please let me know, and the price too please. Thank you for the pictures! __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 11-21-2009 at 11:10 PM.

11-22-2009, 08:42 AM	#21
Eighty-6 Registered User Join Date: Jul 2008 Location: Round Rock, Tx Posts: 249	Re: Parting Out 80 GMC 15 SB 2WD Does it have both Sport mirrors? If so do they have any pitting? If in very good condition how much shipped to 78665?

11-22-2009, 10:00 AM	#24
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Parting Out 80 GMC 15 SB 2WD Awe you beat me to the mirrors.

11-22-2009, 09:40 PM	#25
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting Out 80 GMC 15 SB 2WD* Ray, the belts will work, I just gotta sell my non-truck fitting Suburban bucket seat belts first. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.