rear inner fender ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*project 67 sub* · 11-21-2009, 05:15 AM

looking to purchase some trailer fenders and need to know what size trailer fenders would i need to run in the back of my '67 burb with a 255/35zr 20(27" tall 8.5" wide tire), and still be able to lay out? any help would be greatly appreciated and thanks in advance.

*project 67 sub* · 11-21-2009, 02:38 PM

bump

**scotts62** · 11-21-2009, 03:31 PM

Need to find a place that sells trailer fenders, most around are the same arch just depends on how high you mount them in the inside of the bed that allows it to lay out farther.

Or you could make them like these..
Wheel tubs

jlaird · 11-21-2009, 04:04 PM

Summit also carries some that have bead rolls in them.

**67cheby** · 11-21-2009, 04:25 PM

grant kustoms will make some the size you want with one side finish welded up they look sweet, i have a set i plan on using in the front of mine about 150

draggin86 · 12-07-2009, 10:28 PM

a standard single wheel fender will work fine if you need to make it taller or wider just add some sheet metal. i have done this many time before what you really get from them is the nice shape to start with that would be hard to make form scratch

72hotrodder · 12-08-2009, 12:32 AM

i know its redneck but i have ordered from grant and bought some from tractor supply. and tractor supply is ALOT cheaper and i like the way they look. just measure how tall your tire is and thats how big the fenders be from bottom to bottom

**kev2809** · 12-08-2009, 12:56 AM

how much are the ones from tractor supply? and this is tsc right?

72hotrodder · 12-08-2009, 01:09 AM

yea. i think the last time i bought some they were on sale (dont know why) but they were about 20 a piece? i bought 200 bucks worth just cause i knew i would need them. this was also about 4 years ago

**scotts62** · 12-08-2009, 09:03 AM

Yeah i think there between $25-35ea now

11-21-2009, 05:15 AM	#1
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	rear inner fender ? looking to purchase some trailer fenders and need to know what size trailer fenders would i need to run in the back of my '67 burb with a 255/35zr 20(27" tall 8.5" wide tire), and still be able to lay out? any help would be greatly appreciated and thanks in advance. Last edited by project 67 sub; 11-21-2009 at 05:17 AM.

11-21-2009, 02:38 PM	#2
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: rear inner fender ? bump

11-21-2009, 03:31 PM	#3
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: rear inner fender ? Need to find a place that sells trailer fenders, most around are the same arch just depends on how high you mount them in the inside of the bed that allows it to lay out farther. Or you could make them like these.. Wheel tubs __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 11-21-2009 at 03:33 PM.

11-21-2009, 04:04 PM	#4
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: rear inner fender ? Summit also carries some that have bead rolls in them.

11-21-2009, 04:25 PM	#5
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: rear inner fender ? grant kustoms will make some the size you want with one side finish welded up they look sweet, i have a set i plan on using in the front of mine about 150 __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-07-2009, 10:28 PM	#6
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: rear inner fender ? a standard single wheel fender will work fine if you need to make it taller or wider just add some sheet metal. i have done this many time before what you really get from them is the nice shape to start with that would be hard to make form scratch

12-08-2009, 12:32 AM	#7
72hotrodder THE TOY STORE Join Date: Nov 2008 Location: florence al Posts: 227	Re: rear inner fender ? i know its redneck but i have ordered from grant and bought some from tractor supply. and tractor supply is ALOT cheaper and i like the way they look. just measure how tall your tire is and thats how big the fenders be from bottom to bottom __________________ having a badass truck and not driving it is like having a playboy model as a wife and not..... well you know.

12-08-2009, 12:56 AM	#8
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: rear inner fender ? how much are the ones from tractor supply? and this is tsc right? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-08-2009, 01:09 AM	#9
72hotrodder THE TOY STORE Join Date: Nov 2008 Location: florence al Posts: 227	Re: rear inner fender ? yea. i think the last time i bought some they were on sale (dont know why) but they were about 20 a piece? i bought 200 bucks worth just cause i knew i would need them. this was also about 4 years ago __________________ having a badass truck and not driving it is like having a playboy model as a wife and not..... well you know.

12-08-2009, 09:03 AM	#10
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: rear inner fender ? Yeah i think there between $25-35ea now __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 12-08-2009 at 09:03 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.