|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
12-18-2009, 09:34 PM
|
#1 |
|
Young One
Join Date: Oct 2003
Location: La Porte Indiana
Posts: 138
|
No "Start" position when turning key. 1983 6.2L K5
Picked up a 1983 M1009 K5 blazer a few months ago and just started messing with it. Had no starter when I bought it. Replaced that with a good one.. Now I'm just wondering what needs to be fixed in the steering column, it will turn to the run position but not any further.. Is there a simple fix? Can I turn it to the run position and use a screw driver to jump across the starter just to see if it will start, or will that mess stuff up?
__________________
69 R/S Camaro 79 K5 86 M1008 11 P71 Vic 12 Ram 3500 18 Ram 2500 |
|
|
|
12-18-2009, 10:07 PM
|
#2 |
|
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: No "Start" position when turning key. 1983 6.2L K5
before shorting, check the linkage connections take out the cotter pin does it move up more,has the key cylinder been out ? coloum change? no N start?
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
|
|
|
|
12-19-2009, 09:51 AM
|
#3 |
|
Young One
Join Date: Oct 2003
Location: La Porte Indiana
Posts: 138
|
Re: No "Start" position when turning key. 1983 6.2L K5
Column or ignition could have been changed but not by me... I got it directly from the DRMO lot.
__________________
69 R/S Camaro 79 K5 86 M1008 11 P71 Vic 12 Ram 3500 18 Ram 2500 |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
