|
|
|
01-05-2010, 09:51 PM
|
#1 |
|
Registered User
Join Date: Nov 2009
Location: stockholm, nj
Posts: 15
|
roller wheels
I have a 54 chevy pickup with the original 6 lug suspension.
I need a set of roller wheels for it. What modern wheels will fit it, something I could find at the junkyard that would have an ok back spacing. Is there an narrow space saver wheels that have the same lug pattern? |
|
|
|
01-06-2010, 01:39 PM
|
#2 |
|
Registered User
Join Date: Apr 2008
Location: Denver, CO
Posts: 455
|
Re: roller wheels
Any 6 lug chevy wheels will bolt up. the main issue is the center hole diameter for the front wheels. I got a set of 16's off a 1996 Chevy and they bolted right up on the rear but the center hole (dont know the correct term) was about 1/2" too small - so they wouldn't bolt up. But it's nothing a grinder wouldn't fix...
|
|
|
|
|
01-06-2010, 07:57 PM
|
#3 |
|
Registered User
Join Date: Oct 2007
Location: pittston,PA
Posts: 1,184
|
Re: roller wheels
jumpin over here from the olskool site i see. did you get rid of you car yet.
__________________
There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter) |
|
|
|
|
01-06-2010, 09:02 PM
|
#4 | |
|
Registered User
Join Date: Nov 2009
Location: stockholm, nj
Posts: 15
|
Re: roller wheels
Quote:
|
|
|
|
|
|
01-06-2010, 10:31 PM
|
#5 |
|
Registered User
Join Date: Sep 2008
Location: Benton, Arkansas
Posts: 71
|
Re: roller wheels
I think most six lug trucks are the same, 6x5.5. Chevy 2wd and 4wd, Mazda, Nissan, Toyota. But definately not Dodge and newer Fords. Just take a tape measure with you to be sure.
__________________
1950 Chevy 3600 1951 Chevy 3100 1954 Chevy 3100 1954 Chevy 6400 |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
