1950 AD Truck Cab Mount Floor Hole Locations - The 1947 - Present Chevrolet & GMC Truck Message Board Network

patrickk1 · 01-25-2010, 03:52 PM

What are the measurements between the holes (center to center) for the holes in the floor for the cab mounts? I am replacing the cab mounts and the floor was previously replaced and i think the holes drilled in the floor might be off. The old mounts were rusted out in the area where the old mounts sat so i can not use them as a reference. My back two mounts/floor area is perfect. I was looking for the dimensions from hole to hole for the front to front, front to back on both, and diagonally from back left to front right and so on.

Thanks.

bjcaldwe · 01-25-2010, 07:57 PM

I would verify these measurements with someone else. I have my cab up on the firewall and it blocks all the light in my tiny garage lol.

From the front mounting hole to the outer rear mounting hole I had about 36 1/2 inches. Between the front mounting holes I had about 47 inches.

Would any of the manuals have these measurements?

OrrieG · 01-25-2010, 11:10 PM

A factory assembly manual will. Or you might try the old car manual project site has dealer tech reference manuals that have frame dimensions.

patrickk1 · 01-26-2010, 08:30 AM

I couldn't manage to find where i placed my assembly manual but those measurements match up with the plans i have for a body dolly that uses the mount holes and matches up with where the new front mount holes are on my cab.

Thanks.

bjcaldwe · 01-26-2010, 11:09 AM

No prob, glad I could help.

Dan Bowles · 02-21-2010, 09:12 PM

Factory assembly manual for the front mount on a '54 is 23.5 +/- 0.062 from center line so I'd say he's right on the money!

01-25-2010, 03:52 PM	#1
patrickk1 Registered User Join Date: Apr 2009 Location: Billerica, Ma Posts: 197	1950 AD Truck Cab Mount Floor Hole Locations What are the measurements between the holes (center to center) for the holes in the floor for the cab mounts? I am replacing the cab mounts and the floor was previously replaced and i think the holes drilled in the floor might be off. The old mounts were rusted out in the area where the old mounts sat so i can not use them as a reference. My back two mounts/floor area is perfect. I was looking for the dimensions from hole to hole for the front to front, front to back on both, and diagonally from back left to front right and so on. Thanks. __________________ - Patrick 1964 GMC pickup lwb ~ My newest build! 1937 Ford Coupe ~ Custom frame, LS1, quickchange 1950 Chevrolet 3100 ~ Bagged (Sold) 1931 Chrysler Roadster ~'32 Ford Frame, Channeled 8" (Originally a 60's show car) 1967 Chevelle ~ 454 Triple Black (Sold) 1964 Chevrolet Impala SS (Sold)

01-25-2010, 07:57 PM	#2
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: 1950 AD Truck Cab Mount Floor Hole Locations I would verify these measurements with someone else. I have my cab up on the firewall and it blocks all the light in my tiny garage lol. From the front mounting hole to the outer rear mounting hole I had about 36 1/2 inches. Between the front mounting holes I had about 47 inches. Would any of the manuals have these measurements? __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

01-25-2010, 11:10 PM	#3
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: 1950 AD Truck Cab Mount Floor Hole Locations A factory assembly manual will. Or you might try the old car manual project site has dealer tech reference manuals that have frame dimensions. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

01-26-2010, 08:30 AM	#4
patrickk1 Registered User Join Date: Apr 2009 Location: Billerica, Ma Posts: 197	Re: 1950 AD Truck Cab Mount Floor Hole Locations I couldn't manage to find where i placed my assembly manual but those measurements match up with the plans i have for a body dolly that uses the mount holes and matches up with where the new front mount holes are on my cab. Thanks. __________________ - Patrick 1964 GMC pickup lwb ~ My newest build! 1937 Ford Coupe ~ Custom frame, LS1, quickchange 1950 Chevrolet 3100 ~ Bagged (Sold) 1931 Chrysler Roadster ~'32 Ford Frame, Channeled 8" (Originally a 60's show car) 1967 Chevelle ~ 454 Triple Black (Sold) 1964 Chevrolet Impala SS (Sold)

01-26-2010, 11:09 AM	#5
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: 1950 AD Truck Cab Mount Floor Hole Locations No prob, glad I could help. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

02-21-2010, 09:12 PM	#6
Dan Bowles AD Addict Join Date: Oct 2009 Location: Blissfield, MI Posts: 822	Re: 1950 AD Truck Cab Mount Floor Hole Locations Factory assembly manual for the front mount on a '54 is 23.5 +/- 0.062 from center line so I'd say he's right on the money!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.