my lucks been good today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigd65 · 01-31-2003, 01:15 PM

well i fianlly got my distributor fixed today. i went to OWENS MACHINE SHOP in Pearland and talked to him about my problem with the spark knock, and told him im looking for distributor shims. he gave me one and said that should do it. well i went out, FIRST DAY OFF

and pulled my dist apart. there was enough play that the little ears that go up inside the dist would almost come out of the slots. any way i also changed the gear and put 2 shims on. there is about .010- .015 clearance. anyway i heard someone on here say something about matching the side of the gear with the extra dimple with the point of the rotor. i dont know what exactly the difference is but when i put it back together i timed it at 12* btdc and took it for a drive. NO SPARK KNOCK in town driving at least. i let it go into OD and stepped on it a little, enough to put the load on the engine where it would always knock and NO KNOCK. wooo hoooo. im not sure about on the freeway yet but it looks good so far.

one other thing went my way. i had the same problem someone else on here had and that was the crank bolt at the harmonic balance was stripped. i went to the hardware store and found one that was about 1/4 inch longer and also had threads all the way to the end. anyway i put it in slowly making sure i wasnt going to mess anything up and it went in and tightened down

another wooo hooo. this one was the most important as to what it could have done/ cost me.

DAM, while my luck is good, i need to go out and do something else to my truck

. NAAAA, i believe i will quit while im ahead

BigRed · 01-31-2003, 01:31 PM

Congratulations! Don't you feel better now!?

**swervin ervin** · 01-31-2003, 01:36 PM

Jeff,

I told you something just wasn't right. What I've been trying to help you with was supposed to work. When nothing seemed to help, I knew something was wrong.

Glad you got her fixed buddy.

Oh, on the balancer bolt, been there, done that. I also bought a longer grade 8 bolt to fix mine.

Congrats again.

LOHRTBT · 01-31-2003, 01:38 PM

GOOD DEAL!
Felt so good you thought you would tell us 2x huh!! hahaaha

bigd65 · 01-31-2003, 01:47 PM

sorry about the second post , i dont even know how it happened

LOHRTBT · 01-31-2003, 01:51 PM

hahah i dont care man!! lol

Slonaker · 01-31-2003, 02:04 PM

Buy a lottery ticket while your luck is still good.

Slonaker

79BIG10 · 01-31-2003, 04:11 PM

Wanna send some of that good luck my way Jeff

01-31-2003, 01:15 PM	#1
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,938	my lucks been good today well i fianlly got my distributor fixed today. i went to OWENS MACHINE SHOP in Pearland and talked to him about my problem with the spark knock, and told him im looking for distributor shims. he gave me one and said that should do it. well i went out, FIRST DAY OFF and pulled my dist apart. there was enough play that the little ears that go up inside the dist would almost come out of the slots. any way i also changed the gear and put 2 shims on. there is about .010- .015 clearance. anyway i heard someone on here say something about matching the side of the gear with the extra dimple with the point of the rotor. i dont know what exactly the difference is but when i put it back together i timed it at 12* btdc and took it for a drive. NO SPARK KNOCK in town driving at least. i let it go into OD and stepped on it a little, enough to put the load on the engine where it would always knock and NO KNOCK. wooo hoooo. im not sure about on the freeway yet but it looks good so far. one other thing went my way. i had the same problem someone else on here had and that was the crank bolt at the harmonic balance was stripped. i went to the hardware store and found one that was about 1/4 inch longer and also had threads all the way to the end. anyway i put it in slowly making sure i wasnt going to mess anything up and it went in and tightened down another wooo hooo. this one was the most important as to what it could have done/ cost me. DAM, while my luck is good, i need to go out and do something else to my truck . NAAAA, i believe i will quit while im ahead __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe

01-31-2003, 01:31 PM	#2
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Congratulations! Don't you feel better now!? __________________ Scott Shelbourne

01-31-2003, 01:36 PM	#3
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Jeff, I told you something just wasn't right. What I've been trying to help you with was supposed to work. When nothing seemed to help, I knew something was wrong. Glad you got her fixed buddy. Oh, on the balancer bolt, been there, done that. I also bought a longer grade 8 bolt to fix mine. Congrats again. __________________ Mike 1985 Chevy C-10

01-31-2003, 01:38 PM	#4
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	GOOD DEAL! Felt so good you thought you would tell us 2x huh!! hahaaha __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

01-31-2003, 01:47 PM	#5
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,938	sorry about the second post , i dont even know how it happened __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe

01-31-2003, 01:51 PM	#6
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	hahah i dont care man!! lol __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

01-31-2003, 02:04 PM	#7
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Buy a lottery ticket while your luck is still good. Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

01-31-2003, 04:11 PM	#8
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Wanna send some of that good luck my way Jeff __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.