tires size suggestions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skeeterbug · 02-20-2010, 12:02 PM

well guys i finally got some wheels on the way, 20 by 8.5 front and 22 by 9 rear coys. i have a 5,4 static drop on the truck right now just wondering what is the tallest sidewall height and section width i can get away with front and rear with such a minimal drop. i may bag it later on down the road just not right now.
2" drop springs fr, 3" drop spindles
4" drop springs rear

**N2TRUX** · 02-20-2010, 12:25 PM

Quote:

Originally Posted by skeeterbug

....what is the tallest sidewall height and section width i can get away with front and rear with such a minimal drop. i may bag it later on down the road just not right now.

Why buy super tall tires if your thinking about bagging it? Even if you can't afford to bag it now, your probaly going to be happier if you get lower profile tires and drop it a bit more if needed.

nastyc10 · 02-20-2010, 12:37 PM

I am running 255-40-20 on my 20x8.5 front wheels. I was running them with a 5" static drop before i went with bags and they looked good. I bagged my truck within a year so I'm glad I didn't go with bigger tires.

skeeterbug · 02-20-2010, 12:29 PM

good point i just dont want it to have alot of space between the top of the tires and the fenderwell lip, that looks kinda cheesy in my opinion.

**N2TRUX** · 02-20-2010, 12:42 PM

If you go with a 255/40/20 or a 245/40/20 up front you might need a bit more drop, but I would give it a try. You might need to trim half a coil up front, but it doesn't sound like it.

skeeterbug · 02-20-2010, 12:43 PM

thats kinda what i was thinking on the front, just wondering about the rear now. do you have any pics of your truck w/ static drop and the 255-40-20, i would love to see them.

nastyc10 · 02-20-2010, 12:56 PM

here's 255-40's with 2.5" spindles and 2" springs.

skeeterbug · 02-20-2010, 01:07 PM

you were right that looks really, really good thanks.

**N2TRUX** · 02-25-2010, 11:03 PM

Quote:

Originally Posted by nastyc10

here's 255-40's with 2.5" spindles and 2" springs.

Quote:

Originally Posted by skeeterbug

you were right that looks really, really good thanks.

Why yes, yes they do. That sits just right..

staggerd86c-10 · 02-24-2010, 03:07 PM

nasty what size rim/tire is that in the back?

nastyc10 · 02-24-2010, 03:14 PM

Quote:

Originally Posted by staggerd86c-10

nasty what size rim/tire is that in the back?

295-40-20 on 20x10 with 5" backspace

lowdownstar · 02-25-2010, 06:58 PM

hey nasty do those big tires now fit with your air ride? (rear)

thanks Ray

nastyc10 · 02-26-2010, 02:41 AM

Quote:

Originally Posted by lowdownstar

hey nasty do those big tires now fit with your air ride? (rear)

thanks Ray

sure do, but I had to remove the stock tubs and trim around the fenderwell area where the tubs meet the side of the bed.

**lolife99** · 02-25-2010, 07:08 PM

The 22x9 Coys look good with a 265/35-22 or 285/35-22 tire.

02-20-2010, 12:02 PM	#1
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	tires size suggestions well guys i finally got some wheels on the way, 20 by 8.5 front and 22 by 9 rear coys. i have a 5,4 static drop on the truck right now just wondering what is the tallest sidewall height and section width i can get away with front and rear with such a minimal drop. i may bag it later on down the road just not right now. 2" drop springs fr, 3" drop spindles 4" drop springs rear __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage Last edited by skeeterbug; 02-20-2010 at 12:26 PM. Reason: drop corrections

02-20-2010, 12:37 PM	#3
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: tires size suggestions I am running 255-40-20 on my 20x8.5 front wheels. I was running them with a 5" static drop before i went with bags and they looked good. I bagged my truck within a year so I'm glad I didn't go with bigger tires.

02-20-2010, 12:29 PM	#4
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: tires size suggestions good point i just dont want it to have alot of space between the top of the tires and the fenderwell lip, that looks kinda cheesy in my opinion. __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

02-20-2010, 12:42 PM	#5
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: tires size suggestions If you go with a 255/40/20 or a 245/40/20 up front you might need a bit more drop, but I would give it a try. You might need to trim half a coil up front, but it doesn't sound like it. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-20-2010, 12:43 PM	#6
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: tires size suggestions thats kinda what i was thinking on the front, just wondering about the rear now. do you have any pics of your truck w/ static drop and the 255-40-20, i would love to see them. __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

02-20-2010, 12:56 PM	#7
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: tires size suggestions here's 255-40's with 2.5" spindles and 2" springs.

02-20-2010, 01:07 PM	#8
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: tires size suggestions you were right that looks really, really good thanks. __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

02-24-2010, 03:07 PM	#10
staggerd86c-10 Squarebody Aficionado Join Date: May 2008 Location: Miami, FL Posts: 713	Re: tires size suggestions nasty what size rim/tire is that in the back?

02-25-2010, 06:58 PM	#12
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: tires size suggestions hey nasty do those big tires now fit with your air ride? (rear) thanks Ray

02-25-2010, 07:08 PM	#14
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: tires size suggestions The 22x9 Coys look good with a 265/35-22 or 285/35-22 tire. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 02-25-2010 at 07:13 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.