A Arm Question + Rear Axle Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TripleZ · 02-26-2010, 10:58 PM

I was hesitant to post this because I know it has been discussed before. I do do a search and could not find it. I have a 77 1/2 ton 5 lug, will the A Arms in the 77 fit into my 67 1/2 ton 6 lug. Will they bolt in without modification. I have the Energy Suspension Kit for the 77, plus the rims I want to use are 5 lug.

I know the rear axles in the 67 are different from the 77, if I decide to replace the axles to convert to 5 lug does any one have opinions on where to buy new axles, I heard the Dutchman makes a good axles at a decent price.

Sorry if this is a re-post.

ZZZ

SCOTI · 02-26-2010, 11:05 PM

77 a-arms will swap to the 67 no problem.
Conversion axles are available from ECE, Moser, CPP, & prob others as well.

DKN · 03-01-2010, 01:42 PM

The 77 control arms can work. You will need the ball joints for the 1967.You will need to use the arm shaft and bushings assemblies from the 77.

Danny Nix
CPP

aggie91 · 03-01-2010, 05:59 PM

Quote:

Originally Posted by DKN

The 77 control arms can work. You will need the ball joints for the 1967.You will need to use the arm shaft and bushings assemblies from the 77.

Danny Nix
CPP

You will only need the ball joints for the 67 if you reuse the 67 spindle and 6 lug hubs/drums. If you use the 77 spindle and 5 lug disc brakes, you will need the 77 bal joints.

DKN · 03-01-2010, 07:12 PM

Quote:

Originally Posted by aggie91

You will only need the ball joints for the 67 if you reuse the 67 spindle and 6 lug hubs/drums. If you use the 77 spindle and 5 lug disc brakes, you will need the 77 bal joints.

Yea youre right. I was thinking of re-using the 67 spindles, and not thinking about which brake he has. Probably because we make 5 lug kits for the OE spindle.
Thanks for clearing up my misguidence.

Danny Nix
CPP

02-26-2010, 10:58 PM	#1
TripleZ Registered User Join Date: Feb 2009 Location: Tucson AZ Posts: 27	A Arm Question + Rear Axle Question I was hesitant to post this because I know it has been discussed before. I do do a search and could not find it. I have a 77 1/2 ton 5 lug, will the A Arms in the 77 fit into my 67 1/2 ton 6 lug. Will they bolt in without modification. I have the Energy Suspension Kit for the 77, plus the rims I want to use are 5 lug. I know the rear axles in the 67 are different from the 77, if I decide to replace the axles to convert to 5 lug does any one have opinions on where to buy new axles, I heard the Dutchman makes a good axles at a decent price. Sorry if this is a re-post. ZZZ Last edited by TripleZ; 02-27-2010 at 01:58 AM.

02-26-2010, 11:05 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: A Arm Question + Rear Axle Question 77 a-arms will swap to the 67 no problem. Conversion axles are available from ECE, Moser, CPP, & prob others as well. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-01-2010, 01:42 PM	#3
DKN Active Member Join Date: Feb 2008 Location: Los Angles CA Posts: 136	Re: A Arm Question + Rear Axle Question The 77 control arms can work. You will need the ball joints for the 1967.You will need to use the arm shaft and bushings assemblies from the 77. Danny Nix CPP



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.