KS A few 65 GMC pieces

[GMC406]

Bought a 65 for the running v-6/ trans and radiator and fuel tank. As far as I know that is all I am going to keep. All sheet metal is really rough either rust or banged up. Has good glass except for windshield. The hood is probably shot two small dents on front and rust on the bottom edge on both sides. The gage cluster is decent but nothing special. The cab isnt horible but again noting special, it does have a title. If anyone wants the chasis or anything let me know. Respond with what you want and if I have a pic of it on my camera I will post it when I get bateries.

[DPowers]

Pics or more info on cluster

[ScottH]

Interested in the following depending on price and condition:

seat belts
visors
wiper blades
heater controls (deluxe)
shifter arm

Thanks
Scott

[GMC406]

I will post the few pics I have of inside can get more detailed ones if you want but It will probaly be a week at best before I see the truck again. Same goes for what you are interested in may be a week or two to get it out long as your not in a hurry. I will try to come up with prices shortly. PM me with any questions.

[GMC406]

heres the inside

[ScottH]

Thanks for the pics. Doesnt look like seat belts or visors are there but would be interested in the heater controls, radio delete plate, and wipers (just the blades) if they are the original stainless style. I'll leave pricing up to u (mods will probably be after u to post prices anyway due to board rules).

thanks
Scott

[DPowers]

PM sent about cluster. ScottH is right about the need for prices.

[GMC406]

OK guess I didnt read close enough to see I had to set prices. Just dont know what all the little things are worth. ScottH I can get more pics either this week or weekend. Will try to come up with some prices.

[low79fx]

2nd on heater control panel if ScottH declines.

[GMCMG]

How much for all the headlight hardware (inserts, rings, mounts) and headlight switch (or at least knob)? Is there a horn button? How is the tailgate? What do you plan on doing with the rest of it once you part it out?
Thanks.

[GMC406]

OK low79

GMCMG Hows $10 + ship sound minus the switch D Powers has first dibs on that. Tailgate is pretty darn ugly. The rest will get crushed for steel price unless its worth more than that to someone for a chasis. I Beleive it would bring close to 300 or over for steel based on what others have hauled in lately.

If I am slow getting back to you on a price I am probably researchng to find a fair cost, dont want to give it away, but I dont want to rip anyone off either.

[GMC406]

ScottH Pending adding some visors and seat belts if your still interested when I get pictures of them how is $40+ship for delete plate, heater controls and wipers

[GMC406]

Heres a few more pics of the outside(probbly wont help anyone, shes swiss cheese, but just in case)

[ScottH]

Can u post pics of the wiper blades when u get a chance?
BTW do u need any parts, I think I'll be getting a 66 GMC parts truck soon.

Thanks

Scott

[GMC406]

The only things I can think of needing right now that I dont have are decent front fenders and a 61 drivers door. Will get more pics next time I am at the farm.

[magooster]

How much for the cluster?

[GMC406]

$30 but DPowers is first in line if he passes you will be second.

[DPowers]

Did you get my PM?

[GMC406]

Yes I did, whenever I get back up there I will have it running and make sure all the gagues and the switches you want all function before you worry about sending me money.

[DPowers]

Works for me- no rush and just let me know.

[63 extreme low]

Would you cut out the whole dash and ship to 40004? How much?

[GMC406]

Assuming I can get it out ok I could do that. Did some looking on here and seems $100 + ship would be fair, not for sure on shipping seen others going for $50 would have to check on weight and all when/if I can get it out for you. Will keep in touch if that sounds good to you. You are just wanting the whole dash from pillar to pillar correct. Would have no gages, ashtray, delete plate or heater controls. Glove box door would stay with it tho.

[63 extreme low]

Originally Posted by GMC406

Assuming I can get it out ok I could do that. Did some looking on here and seems $100 + ship would be fair, not for sure on shipping seen others going for $50 would have to check on weight and all when/if I can get it out for you. Will keep in touch if that sounds good to you. You are just wanting the whole dash from pillar to pillar correct. Would have no gages, ashtray, delete plate or heater controls. Glove box door would stay with it tho.

Sounds fair, post pics when you get it out or PM me. Thanks

[GMC406]

Ok where to start, ScottH while making sure the heater controls moved I broke a arm and only one wiper apears to be original the other is definintly not orginal, will post pics of them later anyway. So that just leaves you with a delete plate correct? Send me 12 bucks and its yours.

reighmey got the tailights off will post pics in the next couple days and make sure its what you want.

DPowers got the cluster and switchs you wanted, I know the wiper switch worked headlights were out so I didnt get to test headlight switch but it looks to be faily new accually.

63 extreme low I got the dash out without hurting it at all. Just torched down the part of the cab that its spot welded to, I didnt want to acidently mess up the dash grinding off the spot welds but it came out good and seems to be in pretty good shape, will post pics in the next day or two.

I have some other little parts I salvaged, handles V-6 badges and what not when I get a full list of prices and pics of all the other little things I will start a new thread and put a link to it in here. Thank you, to all of you!!

[reighmey]

How do the rear light look?