another drop member question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

texastrendz · 03-10-2010, 12:02 AM

i know i should call nate, but this way we will all have the answer. do you have to run the high hump with the drop member with the genIII/460le trans combo? i am running a two piece drive shaft in a lwb 72?

n2billet · 03-10-2010, 12:05 AM

Quote:

Originally Posted by texastrendz

i know i should call nate, but this way we will all have the answer. do you have to run the high hump with the drop member with the genIII/460le trans combo? i am running a two piece drive shaft in a lwb 72?

yes....he raises the motor to clear the rack

Wild83C10 · 03-10-2010, 01:56 PM

look at the instructions.

texastrendz · 03-10-2010, 10:23 PM

read the instruction: great answer, that helped me a bunch.

Wild83C10 · 03-10-2010, 10:41 PM

Quote:

Originally Posted by texastrendz

read the instruction: great answer, that helped me a bunch.

Seems like a great answer to me since it provides all the details needed.

What does it say under the "Cab Mods" section at the bottom of the instructions??

60-66
... cab floor will need to be modified for trans bellhousing clearance if equip'd with a small hump...

67-72
... small hump will need to be converted to the large hump...

73-87
cab floor and firewall will need no modification when running a small block and auto.

texastrendz · 03-10-2010, 10:50 PM

great answer if you have the instructions. why do you think i asked?

Wild83C10 · 03-11-2010, 01:55 PM

Quote:

Originally Posted by texastrendz

if you have the instructions.

That seems to be a common problem, buyers rarely get the instructions. Then they come here and ask questions.

Ask Nate for the instructions there is other info on there that is important like torque specs and dimensions.

mike14_07 · 03-12-2010, 12:12 AM

you could raise your trans hump up or make a new one

03-10-2010, 12:02 AM	#1
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	another drop member question i know i should call nate, but this way we will all have the answer. do you have to run the high hump with the drop member with the genIII/460le trans combo? i am running a two piece drive shaft in a lwb 72?

03-10-2010, 01:56 PM	#3
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: another drop member question look at the instructions. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

03-10-2010, 10:23 PM	#4
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: another drop member question read the instruction: great answer, that helped me a bunch.

03-10-2010, 10:50 PM	#6
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: another drop member question great answer if you have the instructions. why do you think i asked?

03-12-2010, 12:12 AM	#8
mike14_07 Registered User Join Date: Dec 2008 Location: Mt. Pleasant, TX Posts: 268	Re: another drop member question you could raise your trans hump up or make a new one



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.