Best place to get a lowering kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kmart2352 · 03-12-2010, 12:17 AM

I would like to get a 3-5 lowering kit, but i would like 3 inch drop spindles and a 5 inch flip kit. Where would be the best place to get one like that. The truck is an 87 2wd.

oldschool18 · 03-12-2010, 01:05 AM

In the past 10 years I have lowered 5 trucks of my own and a dozen of other people and I have used airbagit.com......I think there prices are better and I have never had a prob with there stuff.....but having said that its is always best to shop around and do some reserch, there are deals to be had out there.......you just got to find them

**N2TRUX** · 03-12-2010, 11:31 AM

Quote:

Originally Posted by oldschool18

In the past 10 years I have lowered 5 trucks of my own and a dozen of other people and I have used airbagit.com......

You should play the lotto. You are a very luck man.

flamingbig10 · 03-12-2010, 01:27 AM

summit racing or sport truck direct is good

Tx Firefighter · 03-12-2010, 07:55 AM

When I worked in the dealership I was the guy who lowered trucks that we put on the lot to catch people's attention. I got the parts for every one of them from Summit. There was a time I was doing two 4/6 drops a week. Probably a 100 trucks total.

No one has cheaper prices than Summit has. If you find a cheaper price just call them and they will beat it by 10 percent. Plus, any order from Summit has a 12 dollar handling charge and that's it, no shipping costs. That is a bargain. If you order spindles, flip kit, and other stuff from someone else you are going to pay over 50 bucks shipping costs.

smashingchuck · 03-12-2010, 12:41 PM

I would use Summit for what you are looking for.

JohnC · 03-13-2010, 11:31 AM

I like Summit, but Stylin' Trucks is running a sale on a DJM 3/5 kit like you are talking about. Also if you use the coupon code: STYLESHIP shipping is free.

ECU PIRATE · 03-13-2010, 02:09 PM

Quote:

Originally Posted by JohnC

I like Summit, but Stylin' Trucks is running a sale on a DJM 3/5 kit like you are talking about. Also if you use the coupon code: STYLESHIP shipping is free.

x2 on JohnC's comment. I think I might order my kit from Stylin Trucks in the next month. Too bad they don't give you the C-notches as well for the $ 340 price.............

**nlped** · 03-13-2010, 04:24 PM

Go to EvilBay and check acepartsexpress. They have some really good prices. It's where I bought the spindles for "Bob". Worth lookin'.

bharrison1 · 03-13-2010, 07:41 PM

Dont use three inch spindles unless you are plannin on runnin big wheels they will rub the lower control arms

flamingbig10 · 03-13-2010, 07:53 PM

Quote:

Originally Posted by bharrison1

Dont use three inch spindles unless you are plannin on runnin big wheels they will rub the lower control arms

just depends on wheels I got 15s with 3" spindles with no modifying

Rogue_Sentinel · 03-13-2010, 07:54 PM

$195 for Lowering Spindles at
http://shop.suspensionmax.com/Shop/C...ds_per_page/96

but i would call up summit 2 see if they would beat the price

JohnC · 03-14-2010, 12:13 AM

Quote:

Originally Posted by bharrison1

Dont use three inch spindles unless you are plannin on runnin big wheels they will rub the lower control arms

Nothing a grinder won't solve.

oldschool18 · 03-14-2010, 12:40 AM

i play the lotto some times and never win.

03-12-2010, 12:17 AM	#1
Kmart2352 Registered User Join Date: Apr 2009 Location: Saco, Maine Posts: 151	Best place to get a lowering kit I would like to get a 3-5 lowering kit, but i would like 3 inch drop spindles and a 5 inch flip kit. Where would be the best place to get one like that. The truck is an 87 2wd. __________________ 87 2wd GMC Sierra Classic. 86 4wd GMC Sierra Classic. 95 2wd GMC Sierra. 96 2wd Chevrolet S-10.

03-12-2010, 01:05 AM	#2
oldschool18 Registered User Join Date: Jan 2010 Location: Hollidaysburg, PA Posts: 785	Re: Best place to get a lowering kit In the past 10 years I have lowered 5 trucks of my own and a dozen of other people and I have used airbagit.com......I think there prices are better and I have never had a prob with there stuff.....but having said that its is always best to shop around and do some reserch, there are deals to be had out there.......you just got to find them

03-12-2010, 01:27 AM	#4
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Best place to get a lowering kit summit racing or sport truck direct is good __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-12-2010, 07:55 AM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Best place to get a lowering kit When I worked in the dealership I was the guy who lowered trucks that we put on the lot to catch people's attention. I got the parts for every one of them from Summit. There was a time I was doing two 4/6 drops a week. Probably a 100 trucks total. No one has cheaper prices than Summit has. If you find a cheaper price just call them and they will beat it by 10 percent. Plus, any order from Summit has a 12 dollar handling charge and that's it, no shipping costs. That is a bargain. If you order spindles, flip kit, and other stuff from someone else you are going to pay over 50 bucks shipping costs. __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 03-12-2010 at 07:55 AM.

03-12-2010, 12:41 PM	#6
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Best place to get a lowering kit I would use Summit for what you are looking for. __________________ 78 Build Thread 4Runner Build

03-13-2010, 11:31 AM	#7
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Best place to get a lowering kit I like Summit, but Stylin' Trucks is running a sale on a DJM 3/5 kit like you are talking about. Also if you use the coupon code: STYLESHIP shipping is free.

03-13-2010, 04:24 PM	#9
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Best place to get a lowering kit Go to EvilBay and check acepartsexpress. They have some really good prices. It's where I bought the spindles for "Bob". Worth lookin'. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

03-13-2010, 07:41 PM	#10
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: Best place to get a lowering kit Dont use three inch spindles unless you are plannin on runnin big wheels they will rub the lower control arms

03-13-2010, 07:54 PM	#12
Rogue_Sentinel Registered User Join Date: Mar 2009 Location: nc, mount airy Posts: 376	Re: Best place to get a lowering kit $195 for Lowering Spindles at http://shop.suspensionmax.com/Shop/C...ds_per_page/96 but i would call up summit 2 see if they would beat the price __________________ "Myths and legends die hard in America. We love them for the extra dimension they provide, the illusion of near-infinite possibility to erase the narrow confines of most men's reality. Weird heroes and mould-breaking champions exist as living proof to those who need it that the tyranny of 'the rat race' is not yet final." Hunter S THompson

03-14-2010, 12:40 AM	#14
oldschool18 Registered User Join Date: Jan 2010 Location: Hollidaysburg, PA Posts: 785	Re: Best place to get a lowering kit i play the lotto some times and never win.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.