Best drop spindles to get

[ECU PIRATE]

I am trying to get a consensus from all you professional garage mechanics and beer drinkers, on which drop spindles are the best on (2) fronts: price and reliability. I am looking to do maybe a 4" - 4.5" / 6" drop. I already have the Bell Tech kit for the rear. 3" spindle with how much of the coil cut or: 2.5" spindle with how much of the coil cut?

Thanks,

Mike

[nlped]

I did a 2.5" McGaughy spindle with a 1" drop coil (that I later cut a 1/2 coil off of to get the truck to sit level...for a total of 4 1/4" drop in the front). The spindle fit beautifully and was by far the least expensive one after shipping. I had absolutely no issue at all with them. I used the 2.5" drop because I planned on using the stock 15" Rally and didn't want to grind on my lower control arm.

I, too, just did a flip in the rear, for 5.5" of drop in the rear.

The pictures are before and after the 1/2 coil cut.

Hope this helps,

Ed

[ECU PIRATE]

Originally Posted by nlped

I did a 2.5" McGaughy spindle with a 1" drop coil (that I later cut a 1/2 coil off of to get the truck to sit level...for a total of 4 1/4" drop in the front). The spindle fit beautifully and was by far the least expensive one after shipping. I had absolutely no issue at all with them. I used the 2.5" drop because I planned on using the stock 15" Rally and didn't want to grind on my lower control arm.

I, too, just did a flip in the rear, for 5.5" of drop in the rear.

The pictures are before and after the 1/2 coil cut.

Hope this helps,

Ed

Thanks Ed. I am still doing my research but, they seem like a good choice. I am also looking @ the Western Chassis spindles for $ 230 (before shipping)

[p_rubottom]

Check out grunions in AZ. They had the best prices when i was looking not too long ago. They sell Mcgaughys for $217...

http://grunionfabrication.com/loweri...c-121_120.html

[bigarmzz]

Originally Posted by ECU PIRATE

Thanks Ed. I am still doing my research but, they seem like a good choice. I am also looking @ the Western Chassis spindles for $ 230 (before shipping)

they'll rape ya on shipping though..i just ordered my spindles, springs and flip kit, and sport truck direct took me for $100 for shipping altogether

[ECU PIRATE]

Originally Posted by bigarmzz

they'll rape ya on shipping though..i just ordered my spindles, springs and flip kit, and sport truck direct took me for $100 for shipping altogether

Ouch...................I guess I made out pretty good on that ebay flip kit/ c notch for $ 50. It's a shame everything that we need costs so much money. Spindles for an S-10 are 1/3 of the price

[paul66c10]

Originally Posted by bigarmzz

they'll rape ya on shipping though..i just ordered my spindles, springs and flip kit, and sport truck direct took me for $100 for shipping altogether

thats not too bad considering the weight of all that stuff they charged me the same shipping and i got 5/7 drop kit,shocks, and upper/lower ball joints/tie rod ends

[Jonboy]

You might give Jeff at CPP a call, too. They are a board vendor, but they beat those prices on my spindles, IIRC.

[nlped]

I got my McGaughy's for $230 shipped off EvilBay last time, and it looks like they can still be had for $239 on there with very little searching. Just some info

[N2TRUX]

Take a look in our Vendor Marketplace. Norcal SS says he will beat anyone's advertised price-DJM blowout c-10 1973 - 1987 LINK

[Cherub]

depending on the wheel size, you may want to stay away from 3" spindle. I have never heard anything bad about any of the current drop kit makers. Ive installed cpp, belltech, djm and they all seem to make good products.