might be buying a 64 C40 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*jake wells* · 04-11-2010, 10:38 PM

Anything to look for on one of these. it runs and drives fine i have no ideal what kind of 6 cylinder it is. its only 650$ the only thing about is the brakes are a little weak. any pointers to this truck?

thanks jake

**Captainfab** · 04-12-2010, 12:42 AM

The engine is probably a 250 since it is a C40. The drivetrain in the C40's aren't much different than the C10-30's. The running gear and suspension is where the difference is. Does it have a 2 speed rear end? Trucks like these don't ride very well without a bit of weight on them, and they are low geared so freeway driving isn't going to be at 65. Bodywise they are mostly the same as the C10-30's except for the fenders, grill, grill panel, radiator support. The cabs are the same except for the floor and the lower firewall in the trans area.

**aerotruk63** · 04-12-2010, 05:53 AM

You have to pressure bleed the brake system. You cannot bleed the system any other way. We made a pressure system out of pipe and fittings. If you know of someone who has a pressure bleeder then it's easy.

*jake wells* · 04-12-2010, 08:20 AM

no it doesn't have the 2 speed rear. but it does have a good amount of cab rust on it somebody painted it with a roller so it doesn't look bad

markeb01 · 04-12-2010, 08:54 AM

Whether it's a good deal or not really depends on what you would do with it. Rust repairs are the most expensive part of restoration unless you can do it all yourself. If its simply going to be used as a yard truck this may not matter. Here's a thread that might help in making an informed decision:

http://www.stovebolt.com/techtips/bu...uide_60_66.htm

04-11-2010, 10:38 PM	#1
jake wells Account Suspended Join Date: Sep 2009 Location: No Longer Here Posts: 352	might be buying a 64 C40 Anything to look for on one of these. it runs and drives fine i have no ideal what kind of 6 cylinder it is. its only 650$ the only thing about is the brakes are a little weak. any pointers to this truck? thanks jake

04-12-2010, 12:42 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: might be buying a 64 C40 The engine is probably a 250 since it is a C40. The drivetrain in the C40's aren't much different than the C10-30's. The running gear and suspension is where the difference is. Does it have a 2 speed rear end? Trucks like these don't ride very well without a bit of weight on them, and they are low geared so freeway driving isn't going to be at 65. Bodywise they are mostly the same as the C10-30's except for the fenders, grill, grill panel, radiator support. The cabs are the same except for the floor and the lower firewall in the trans area. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-12-2010, 05:53 AM	#3
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: might be buying a 64 C40 You have to pressure bleed the brake system. You cannot bleed the system any other way. We made a pressure system out of pipe and fittings. If you know of someone who has a pressure bleeder then it's easy. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

04-12-2010, 08:20 AM	#4
jake wells Account Suspended Join Date: Sep 2009 Location: No Longer Here Posts: 352	Re: might be buying a 64 C40 no it doesn't have the 2 speed rear. but it does have a good amount of cab rust on it somebody painted it with a roller so it doesn't look bad

04-12-2010, 08:54 AM	#5
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: might be buying a 64 C40 Whether it's a good deal or not really depends on what you would do with it. Rust repairs are the most expensive part of restoration unless you can do it all yourself. If its simply going to be used as a yard truck this may not matter. Here's a thread that might help in making an informed decision: http://www.stovebolt.com/techtips/bu...uide_60_66.htm __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.