Custom Offset Steel wheels

[TheDark1]

Hey guys, I'm looking for some steel wheels that I can put some hubcaps on. I need them about 10 or 12 inches wide with a custom offset. I checked Wheel Vintiques and US Wheel, but they don't have any in 6 lug. I really want to keep the six lug bolt pattern. Any ideas? Jeff

[low79fx]

Try Stockton Wheels.

[GGinferno]

Stockton wheels made mine.

[markeb01]

You might also try RallyAmerica. They've received good press in a couple of threads where I've seen them mentioned:

http://www.rallyamerica.com/hotrod_trucks/index.html

They also sell used wheels, so they no doubt have the 6 lug centers:

http://www.rallyamerica.com/usedwheels/chevy.html

[Rannos]

Wheel Vintiques have the pre 71 ralley wheel for our trucks in 6 lug in 15x12. They have the 5 small slots in them but otherwise are the same as plain steel wheels. You can order them in various back spacing from them as well.

[aerotruk63]

If you have access to a welder, possibly you could purchase a set of white spoke rims 10" wide and cut out their centers. Cut the rings off your stock 6 lug wheels and weld your centers onto the 10" rings. Mount them on your rear axel to true the centers so they turn without a wobble.
I cut the original 16" wheels in half added a piece of flatstock to make the wheels 9.5" wide, then reinstalled the original center for my 63 C10
I'm doing a set of 17"x 6.5" for my K10 project, converted from the 17.5"x5.25 original wheels.

[jonzcustomshop]

that ralleyamerica is a good place to go through, if you go to the h.a.m.b. at all, contact wheelkid over there, they should be able to make you a set.

[TheDark1]

Thanks guys, this is exactly what I was looking for.

GGinferno, how wide are your wheels, and is the rearend shortened?

[wild one]

Originally Posted by markeb01

You might also try RallyAmerica. They've received good press in a couple of threads where I've seen them mentioned:

http://www.rallyamerica.com/hotrod_trucks/index.html

They also sell used wheels, so they no doubt have the 6 lug centers:

http://www.rallyamerica.com/usedwheels/chevy.html

Originally Posted by jonzcustomshop

that ralleyamerica is a good place to go through, if you go to the h.a.m.b. at all, contact wheelkid over there, they should be able to make you a set.

with the above statements, I has a pair of custom offset 10" wide stock centered steel wheels made for the rear of my panel, they will have 295/50R15 tires on them once I decide on a color. Gary and son over at Rally America are great guys that do great work with a fast turn around time. They also stand behind their product 100%, I wouldn't hesitate to use them again!