replacing door pins - The 1947 - Present Chevrolet & GMC Truck Message Board Network

makalei · 03-09-2001, 10:36 PM

I have a 86 chevy truck and I need to replace the pins and bushings on the doors how do I do this

bigd65 · 03-10-2001, 02:44 AM

i did it on my 85. its not all that hard but you do need someone to help you.
just knock out the old pins and bushings and put the new ones in. a little hint, dont remove both at the same time. do the top then the bottom. as isaid its not complicated but is a pain in the @$$. good luck

------------------
85 C10 350/700r4
HOLLEY STREET DOMINATOR IANTAKE
EDELBROCK 1406 COMP. SERIES CARB.
HYPERTECH POWER COIL
FACTORY HEADERS
MAGNAFLOW CAT/MUFFLER/3in. EXHAUST
3.42 REAR GEARS
PROTHANE SUSPENSION-TOTAL KIT
and still going
"thats my toy"
Jeff Dodson
Angleton,Tx.

03-09-2001, 10:36 PM	#1
makalei Registered User Join Date: Mar 2001 Location: st pete fl usa Posts: 1	replacing door pins I have a 86 chevy truck and I need to replace the pins and bushings on the doors how do I do this __________________ makalei

03-10-2001, 02:44 AM	#2
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,935	i did it on my 85. its not all that hard but you do need someone to help you. just knock out the old pins and bushings and put the new ones in. a little hint, dont remove both at the same time. do the top then the bottom. as isaid its not complicated but is a pain in the @$$. good luck ------------------ 85 C10 350/700r4 HOLLEY STREET DOMINATOR IANTAKE EDELBROCK 1406 COMP. SERIES CARB. HYPERTECH POWER COIL FACTORY HEADERS MAGNAFLOW CAT/MUFFLER/3in. EXHAUST 3.42 REAR GEARS PROTHANE SUSPENSION-TOTAL KIT and still going "thats my toy" Jeff Dodson Angleton,Tx. __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.