|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
06-12-2001, 12:00 PM
|
#1 |
|
Registered User
Join Date: Dec 1999
Location: Akron, New York
Posts: 379
|
C-60 engine swap, I6 to V-8
I'm helping a friend replace the blown 292 in his '80 C-60, with a 350. The 292 is backed up by a standard, while the 350 is from a automatic. I have a standard flexplate for the 350.
Besides moving the motor mounts, does anyone see any problems with this? The bellhousings bolt up, dont they? Thanks
__________________
'48 1/2 ton 3100 '55 1 1/2 ton 4400 '59 Willy's CJ-5 '65 3/4 ton 4x4 '70 C-10 All drivers, no show trucks. |
|
|
|
06-13-2001, 08:10 AM
|
#2 |
|
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
The bolt up should be straight forward. You may need to move the transmission mount but I'm not sure. One thing you will definately need is a bigger radiator. Go with a 3 core or the big sucker 4 core. The exhaust will need some routing and additions. Do you have the exhaust manifolds. You could probably find a "y" off a late '80 truck to fit nicely.
------------------ Gerardo 1983 Custom Truck TX Plates: "BAD BOW" http://www.geocities.com/abetterchemist/ |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
