NM LWB Fleet bedsides, tailgate, gas tank, and bumpers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jblockers · 06-29-2010, 01:33 AM

I have some parts left over from shortening down my 72 Super Cheyenne LWB Fleetside.
(2) LWB Fleet Bedsides /$75 ea./ - originals, good condition, only light surface rust, straight, no obvious dents, look very good
(1) Repro tailgate with Chevrolet lettering /$50/, light surface rust in small areas, dented a little, bent a little.
(1) gas tank /$50/, very good condition, no holes, looks great. Has a locking gas cap and sending unit.
(1) Rear bumper /$50/, painted, good condition, straight, only surface rust. Will throw in a slightly bent front bumper.

Hardware, brackets, and bolts not included (because I need them to bolt on my new shortbed). See pictures, can email more.

Make a deal for the lot. This truck has been in southern NM and the sheetmetal is in good shape corrosion-wise.

Prefer if buyer picks up locally in Las Cruces, NM or maybe El Paso, TX. May work out a deal to ship. Need to move this stuff in next month.

Gotta love this website!

**70STOVEBOLT** · 06-29-2010, 10:35 AM

I would like to see more pics of tailgate, pm sent with email.

jblockers · 06-29-2010, 11:43 PM

More pics of tailgate - hardware is not included because I need it for my new gate.

VA72C10 · 06-29-2010, 10:46 AM

great deals!!!

sdailey · 06-29-2010, 11:09 AM

In line for the tailgate pending more pics.

jblockers · 06-30-2010, 12:02 AM

Forgot to add pics of bumper and gas tank!

**michael bustamante** · 06-29-2010, 08:01 PM

Ill let you know about the left fleetside quarterpanal!!!

scott72 · 06-29-2010, 11:43 PM

This is probably a stupid question, but the outsides are pretty far away. It looks like they have holes cut into the sides for the filler neck.

But, on the insides that are more close up, it does not look like this is the case.

Am I confused or what?

I need a passenger side bedside without a hole cut for the fuel tank, already have one like that. Plus, I am pretty close to NM.

jblockers · 06-29-2010, 11:50 PM

There is a cutout for an auxiliary fuel tank on both bedsides, which should be easy to make a patch panel to cover. The cutout is only through the outside sheetmetal. The fuel filler goes between the inside and outside walls.

jblockers · 06-29-2010, 11:47 PM

More pics of bedsides - I think these are in good shape and would be using them except that I now have a SWB. Bolts and hinges etc... not included.

67 ext cab · 06-30-2010, 12:08 AM

put me in on both bed sides, if we can make a shipping deal. i made my truck an ext cab and looks like if i shorten these itll take care of fuel holes

jblockers · 06-30-2010, 12:11 AM

Quote:

Originally Posted by 67 ext cab

put me in on both bed sides, if we can make a shipping deal. i made my truck an ext cab and looks like if i shorten these itll take care of fuel holes

Sounds good, but I don't have much time to spend packing and shipping these bad boys. Send an offer/deal and I'll try to do it.

67 ext cab · 06-30-2010, 12:12 AM

shipping to 25313

jblockers · 06-30-2010, 12:17 AM

I can't arrange any shipping deals. For additional $150, I may be willing to pack them up nicely for a local dropoff, but I really don't have time to do much else. Sorry - wish I could help more, but am moving in a couple of weeks.

67 ext cab · 06-30-2010, 12:13 AM

im no big hurry send me your zipp and ill check into it too

jblockers · 06-30-2010, 12:24 AM

Quote:

Originally Posted by 67 ext cab

im no big hurry send me your zipp and ill check into it too

Ok, my zip is 88012. Thanks

sdailey · 06-30-2010, 09:16 AM

Thanks for the extra pictures, but I'm out on the tailgate.

chuckmc8 · 06-30-2010, 09:22 AM

If I am up on the tailgate, shipping to 30135 please-Thanks!

jblockers · 06-30-2010, 11:38 PM

Quote:

Originally Posted by chuckmc8

If I am up on the tailgate, shipping to 30135 please-Thanks!

Sorry, can't ship items. Local pickup only! Good luck finding one though.

67 ext cab · 06-30-2010, 12:19 AM

well if you dont get a local deal mail me back

**70STOVEBOLT** · 06-30-2010, 10:48 AM

Jesse, I am going to pass on the tailgate, thank you for sending the pics. Good luck with your sales.

Thanks,
Mark

**michael bustamante** · 06-30-2010, 05:24 PM

what are you looking for for the bumper assy (rear) I really only need the shields and mounts if theyre for a coil rear end, but Im thinking my buddy might want to use the bumper

jblockers · 06-30-2010, 11:11 PM

Quote:

Originally Posted by michael bustamante

what are you looking for for the bumper assy (rear) I really only need the shields and mounts if theyre for a coil rear end, but Im thinking my buddy might want to use the bumper

Only the bumper is for sale. No hardware, brackets, or shields are included, sorry. Gotta keep 'em for my new chrome bumpers!

**michael bustamante** · 07-01-2010, 11:37 AM

Quote:

Originally Posted by jblockers

Only the bumper is for sale. No hardware, brackets, or shields are included, sorry. Gotta keep 'em for my new chrome bumpers!

hey man I gotta try!!

BIG69GMC · 06-30-2010, 05:38 PM

PM sent, about the tank condition my question was if the filler neck is bent (like mine, leaks when making turns) probly due to prev owner hanging on the gas pump when filling up. thx jb!

06-29-2010, 01:33 AM	#1
jblockers Registered User Join Date: Jul 2007 Location: Las Cruces, NM Posts: 16	LWB Fleet bedsides, tailgate, gas tank, and bumpers I have some parts left over from shortening down my 72 Super Cheyenne LWB Fleetside. (2) LWB Fleet Bedsides /$75 ea./ - originals, good condition, only light surface rust, straight, no obvious dents, look very good (1) Repro tailgate with Chevrolet lettering /$50/, light surface rust in small areas, dented a little, bent a little. (1) gas tank /$50/, very good condition, no holes, looks great. Has a locking gas cap and sending unit. (1) Rear bumper /$50/, painted, good condition, straight, only surface rust. Will throw in a slightly bent front bumper. Hardware, brackets, and bolts not included (because I need them to bolt on my new shortbed). See pictures, can email more. Make a deal for the lot. This truck has been in southern NM and the sheetmetal is in good shape corrosion-wise. Prefer if buyer picks up locally in Las Cruces, NM or maybe El Paso, TX. May work out a deal to ship. Need to move this stuff in next month. Gotta love this website! Attached Images

06-29-2010, 10:35 AM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,415	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers I would like to see more pics of tailgate, pm sent with email. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-29-2010, 11:43 PM	#3
jblockers Registered User Join Date: Jul 2007 Location: Las Cruces, NM Posts: 16	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers More pics of tailgate - hardware is not included because I need it for my new gate. Attached Images

06-29-2010, 10:46 AM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers great deals!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-29-2010, 11:09 AM	#5
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers In line for the tailgate pending more pics. __________________ Shannon

06-30-2010, 12:02 AM	#6
jblockers Registered User Join Date: Jul 2007 Location: Las Cruces, NM Posts: 16	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers Forgot to add pics of bumper and gas tank! Attached Images

06-29-2010, 08:01 PM	#7
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers Ill let you know about the left fleetside quarterpanal!!! __________________ 1967custom

06-29-2010, 11:43 PM	#8
scott72 Registered User Join Date: Oct 2009 Location: Bayfield, CO Posts: 187	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers This is probably a stupid question, but the outsides are pretty far away. It looks like they have holes cut into the sides for the filler neck. But, on the insides that are more close up, it does not look like this is the case. Am I confused or what? I need a passenger side bedside without a hole cut for the fuel tank, already have one like that. Plus, I am pretty close to NM.

06-29-2010, 11:50 PM	#9
jblockers Registered User Join Date: Jul 2007 Location: Las Cruces, NM Posts: 16	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers There is a cutout for an auxiliary fuel tank on both bedsides, which should be easy to make a patch panel to cover. The cutout is only through the outside sheetmetal. The fuel filler goes between the inside and outside walls.

06-29-2010, 11:47 PM	#10
jblockers Registered User Join Date: Jul 2007 Location: Las Cruces, NM Posts: 16	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers More pics of bedsides - I think these are in good shape and would be using them except that I now have a SWB. Bolts and hinges etc... not included. Attached Images

06-30-2010, 12:08 AM	#11
67 ext cab Registered User Join Date: Jan 2010 Location: cross lanes west virginia Posts: 52	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers put me in on both bed sides, if we can make a shipping deal. i made my truck an ext cab and looks like if i shorten these itll take care of fuel holes

06-30-2010, 12:12 AM	#13
67 ext cab Registered User Join Date: Jan 2010 Location: cross lanes west virginia Posts: 52	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers shipping to 25313

06-30-2010, 12:17 AM	#14
jblockers Registered User Join Date: Jul 2007 Location: Las Cruces, NM Posts: 16	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers I can't arrange any shipping deals. For additional $150, I may be willing to pack them up nicely for a local dropoff, but I really don't have time to do much else. Sorry - wish I could help more, but am moving in a couple of weeks.

06-30-2010, 12:13 AM	#15
67 ext cab Registered User Join Date: Jan 2010 Location: cross lanes west virginia Posts: 52	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers im no big hurry send me your zipp and ill check into it too

06-30-2010, 09:16 AM	#17
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers Thanks for the extra pictures, but I'm out on the tailgate. __________________ Shannon



Register or Log In To remove these advertisements.

06-30-2010, 09:22 AM	#18
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers If I am up on the tailgate, shipping to 30135 please-Thanks!

06-30-2010, 12:19 AM	#20
67 ext cab Registered User Join Date: Jan 2010 Location: cross lanes west virginia Posts: 52	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers well if you dont get a local deal mail me back

06-30-2010, 10:48 AM	#21
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,415	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers Jesse, I am going to pass on the tailgate, thank you for sending the pics. Good luck with your sales. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-30-2010, 05:24 PM	#22
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers what are you looking for for the bumper assy (rear) I really only need the shields and mounts if theyre for a coil rear end, but Im thinking my buddy might want to use the bumper __________________ 1967custom

06-30-2010, 05:38 PM	#25
BIG69GMC Registered User Join Date: Jul 2009 Location: Albuquerque, NM Posts: 101	Re: LWB Fleet bedsides, tailgate, gas tank, and bumpers PM sent, about the tank condition my question was if the filler neck is bent (like mine, leaks when making turns) probly due to prev owner hanging on the gas pump when filling up. thx jb!

Register or Log In To remove these advertisements.