|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
07-14-2010, 10:09 PM
|
#1 |
|
Registered User
Join Date: Apr 2010
Location: AK
Posts: 198
|
Need someone with 2.5" skyjacker and a tape measure
If you have the 2.5" skyjacker lift I could use a hand. Would you measure the distance from the center of the axle (say at the hub) straight up to the bottom of the outer fender for me. Front and rear measurements would be great.
Thanks in advance! For more details of what i am working on see this thread. |
|
|
|
07-15-2010, 05:57 PM
|
#2 |
|
Registered User
Join Date: Apr 2010
Location: AK
Posts: 198
|
Re: Need someone with 2.5" skyjacker and a tape measure
If you have the 4'' I would be happy to see those numbers too. It would give me a point of reference.
Thanks, Matt |
|
|
|
|
07-18-2010, 01:48 PM
|
#3 |
|
Active Member
Join Date: Jun 2000
Location: Pottstown, PA
Posts: 197
|
Re: Need someone with 2.5" skyjacker and a tape measure
I've got 26" front and rear (without the hard top on). Never had any problems with 33X12.5 tires on 10" rims. The other thing I did to help out stability was to add a front sway bar.
__________________
The rides: '72 Blazer 350/4spd/Tuned Port Injection '69 Firebird 400/4 speed 2001 Dodge Dakota Sport 4X4/4.7L V8/5 spd/Headers/Jet Chip, etc. Daily Driver 2002 Airborne Zeppelin (roadbike) Titanium frame/Campy Chorus 2004 Filippi Italia S (rowing shell) |
|
|
|
|
07-18-2010, 02:29 PM
|
#4 |
|
Registered User
Join Date: Apr 2010
Location: AK
Posts: 198
|
Re: Need someone with 2.5" skyjacker and a tape measure
Hey thanks Mike. I really appreciate that.
|
|
|
|
|
07-18-2010, 03:11 PM
|
#5 |
|
Registered User
Join Date: Apr 2010
Location: AK
Posts: 198
|
Re: Need someone with 2.5" skyjacker and a tape measure
So Mike is that the 2.5" or the 4" lift?
I come up with 26 and 27 in the rear on my current lift which is 4 and more like 6+ in the back. |
|
|
|
|
07-18-2010, 03:20 PM
|
#6 |
|
Active Member
Join Date: Jun 2000
Location: Pottstown, PA
Posts: 197
|
Re: Need someone with 2.5" skyjacker and a tape measure
2.5", all springs.
__________________
The rides: '72 Blazer 350/4spd/Tuned Port Injection '69 Firebird 400/4 speed 2001 Dodge Dakota Sport 4X4/4.7L V8/5 spd/Headers/Jet Chip, etc. Daily Driver 2002 Airborne Zeppelin (roadbike) Titanium frame/Campy Chorus 2004 Filippi Italia S (rowing shell) |
|
|
|
|
07-18-2010, 03:39 PM
|
#7 |
|
Registered User
Join Date: Apr 2010
Location: AK
Posts: 198
|
Re: Need someone with 2.5" skyjacker and a tape measure
Thanks again. Hmmm Really makes me wonder what the heck I have going in mine. There are definatly 4" inch blocks and non factory springs in the rear. And the 6 leaves up front leave little doubt that they are non factory lift springs.
No matter, I put the deposit down on a 2.5 so I will see where I end up. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
