Anyway to get cruise with DBC?

[chevydog66]

What parts would I need or what mods need to be made in order to have cruise control with a DBC 01 LQ4 6.0. I know I would need the old cruise control turn signal stalk. Could Speartech modify my harness for this?

[Clyde65]

I would love to have this information too!

[Big Port Jimmy 6]

There is a write up some where, possibly on ls1tech where they used cable drive f body parts on a conversion to make it work.
Here
http://www.ls1tech.com/forums/conver...driven-tb.html
and here
http://www.thirdgen.org/techboard/lt...e-ltx-lsx.html

Hope this helps. Jay

[chevydog66]

I talked to John at Speartech and he said it can be done, just need to get the stalk and module.

[Hart_Rod]

Originally Posted by chevydog66

I talked to John at Speartech and he said it can be done, just need to get the stalk and module.

What module?

[chevydog66]

This module, or controller. Whatever ya call it.

[Hart_Rod]

Originally Posted by chevydog66

This module, or controller. Whatever ya call it.

Thanks.

[Clyde65]

So....ya get that module( I assume it from the DBC donor), get a stalk for your column......and? wire it how?

what about if you have a 78 truck column with cruise already on the turn signal stalk?

I would LOVE to have cruise on my LSx truck!

[Big Port Jimmy 6]

Originally Posted by Clyde65

So....ya get that module( I assume it from the DBC donor), get a stalk for your column......and? wire it how?

what about if you have a 78 truck column with cruise already on the turn signal stalk?

I would LOVE to have cruise on my LSx truck!

Look at the links in my earlier post in this thread.
they explain it. Jay

[Puglia10]

i have that cruise module on my 6.0, might not use it.