DIY fuse panel/relay for LS motor - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djw32 · 08-12-2010, 11:26 AM

Guys,

If I plan on running the factory 5.3 motor in my truck, is there any reason to get a stand alone fuse/relay panel to control my fuel pump?

Has anyone used the factory junction box in their project?

David
________

djw32 · 08-12-2010, 06:18 PM

Second thought,

Nevermind.

HarrolLS1 · 08-12-2010, 07:16 PM

Not sure if this is what you are asking but I hope it helps. It is located in the
"Ls engine swap info" stickyThread ... the link inside that thread says "LT1swap" Lots of wiring info.

http://lt1swap.com/underhoodfuseblock.htm

djw32 · 08-13-2010, 01:32 AM

Harrol,
Good call on that link.

I forgot to grab the junction block when I picked up the motor...I wasn't thinking.

Ackattack · 08-13-2010, 05:54 PM

I posted this in my build thread that you asked about, but here it is again...first item on this page is what I used:

http://www.currentperformance.com/Ac...iring_acc.html

Also, I have a factory fuse block that I didn't use.

djw32 · 08-13-2010, 10:10 PM

Quote:

Originally Posted by Ackattack

I posted this in my build thread that you asked about, but here it is again...first item on this page is what I used:

http://www.currentperformance.com/Ac...iring_acc.html

Also, I have a factory fuse block that I didn't use.

You used this with the factory ecu, right?

08-12-2010, 11:26 AM	#1
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	DIY fuse panel/relay for LS motor Guys, If I plan on running the factory 5.3 motor in my truck, is there any reason to get a stand alone fuse/relay panel to control my fuel pump? Has anyone used the factory junction box in their project? David ________ Last edited by djw32; 08-13-2010 at 02:04 AM.

08-12-2010, 06:18 PM	#2
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: DIY fuse panel/relay for LS motor Second thought, Nevermind. Last edited by djw32; 08-13-2010 at 02:04 AM.

08-12-2010, 07:16 PM	#3
HarrolLS1 Registered User Join Date: Jul 2005 Location: Saint Simons Island,Georgia Posts: 230	Re: DIY fuse panel/relay for LS motor Not sure if this is what you are asking but I hope it helps. It is located in the "Ls engine swap info" stickyThread ... the link inside that thread says "LT1swap" Lots of wiring info. http://lt1swap.com/underhoodfuseblock.htm __________________ Harrol 1968 SWB 1968 SWB 4x4 1969 Suburban 1970 LWB 1970 Blazer 2002 Tahoe Inside every older person is a younger person wondering what happened

08-13-2010, 01:32 AM	#4
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: DIY fuse panel/relay for LS motor Harrol, Good call on that link. I forgot to grab the junction block when I picked up the motor...I wasn't thinking. Last edited by djw32; 08-13-2010 at 02:03 AM.

08-13-2010, 05:54 PM	#5
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,524	Re: DIY fuse panel/relay for LS motor I posted this in my build thread that you asked about, but here it is again...first item on this page is what I used: http://www.currentperformance.com/Ac...iring_acc.html Also, I have a factory fuse block that I didn't use. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.