3/4 ton dropped spindles 73-87

[jonzcustomshop]

are these still made?
if so where ?
I want to do a drop , but keep te 8 lug wheels...

[SCOTI]

Originally Posted by jonzcustomshop

are these still made?
if so where ?
I want to do a drop , but keep te 8 lug wheels...

Check w/Bell Tech or Western Chassis.

[trkluver]

i was wondering the same thing but from what i have been told i dont think they make them. But not really sure, if so i want some

[tinydb84]

Originally Posted by SCOTI

Check w/Bell Tech or Western Chassis.

I am looking for drop spindles too. Western Chassis never got back to me.

POL and Airbagit were the only places I found them.

I havent bought them yet though...

[lolife99]

PerformanceOnLine.com sells them.
http://www.performanceonline.com/197...P-SPINDLE-SET/

Click on the drop down box for C20 pricing.
($400 per set for the C20's. $228.00 for the C10 trucks)

[jonzcustomshop]

Originally Posted by lolife99

PerformanceOnLine.com sells them.
http://www.performanceonline.com/197...P-SPINDLE-SET/

Click on the drop down box for C20 pricing.
($400 per set for the C20's. $228.00 for the C10 trucks)

eek!..well at least they have 'em....
what about stepping the lower control arms? is that an option?

[Flex1]

Hello everyone, i got an 87 chevy r20 planning to lower it 3/4 can anybody please advise me of whats the cheapest and best way to lower it without having to use a c-notch, also do i have to get new shocks if i use 2" spindles + 2' springs.

[SCOTI]

Originally Posted by Flex1

Hello everyone, i got an 87 chevy r20 planning to lower it 3/4 can anybody please advise me of whats the cheapest and best way to lower it without having to use a c-notch, also do i have to get new shocks if i use 2" spindles + 2' springs.

I don't know of anyone making a 2" spindle spec'd for an 8-lug application. Of the one's I do know about for the heavy trucks, they yield 3" of drop so you wouldn't need new shocks (spindles don't change shock travel).

The rear will require shackles & front hangers for 4" drop.

[gofast68c20]

I bought the ones from airbagit a couple years ago, before I was a member here and didnt know any better. I've had them in my truck since and never had a problem. When I first got them I thought one of them was machined wrong so they sent me a new one, turns out I had a faulty tape measure! Lol
Posted via Mobile Device
Posted via Mobile Device

[andrewmp6]

Airbagit does have a few small parts that are ok,I seen a pair or there drop beams for a f150 that worked well.But i would still stay away from them unless its my only option.