door locks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

outlaw · 02-23-2003, 01:38 AM

I have a question and was hoping that someone might be able to help me out and would greatly apprichiated, I have a 1995 Ford Ranger and I currently can not unlock the doors with the key, there is a plastic clip that goes on the back of the door lock assy. that connects to a metal rod that runs down to the door latch assy. the plastic clip is broken and when I bought the truck the passanger side was already broken so when the drivers side broke I did not have one to compare it to, I don't know of anyone around the house that has one, I tried every way that I could think of to make it work an every way that I tried to hook it up it seemed to be too short. I would apprechiate it greatly if someone could send me a picture a diagram or explain it in great detail of how this aggrivating Son of a _itch hooks up, somebody HHHHHEEEEEELLLLLLLPPPPPPPPP MMMMEEEEE!

cdowns · 02-23-2003, 11:20 AM

What do you need door locks on a ford WHO"S GUNNA STEAL IT?????

chevykid04 · 02-23-2003, 11:31 PM

break into it, tear the door apart, and get an assembly from your F*rd dealer, and next time, buy chevy... i think that solves all your problems/questions

outlaw · 02-24-2003, 01:33 AM

I bought the part that I need from the dealer but can't figer out how it goes back together due to the fact that both sides are broken, and I do own chevrolets in fact I own 3 of them this just happens to be the only ford that I have and kinda wish I hadn't bought it. I would go look at the picture at the dealer if I was at home but I am on a drilling rig in the middle of the Gulf of Mexico just asking to see if anyone could help if possible. Thanks a Bunch

outlaw · 02-24-2003, 01:38 AM

there is a plastic clip on the back of the door lock assy. on the inside of the door there is a medal rod that runs down to the door latch assy. I bought the plastic clips already but when I go to hook it all together it seems to be to short and don't know what I am doing wrong in putting it back together can't compare sides since both sides are broken. any help will greatly apprechiated " Danny"

82 Silverado 4X · 02-24-2003, 07:53 PM

Boy, I wish I could help but I've never seen the inside if a Ranger door. This is "one tight Chevy group" and I see it is really rough on NON-CHEVY questions.
Here's some ideas you might look into:
Is it possible that the rod doesn't go directly down to the latch?Maybe it toggles off another joint foward of the latch where the mechanism for the inside lock is and the hole in the latch that you are trying to hook into would be for the power lock option.

Dropped67step · 02-25-2003, 01:02 AM

Hey outlaw what company do you work for my bro is out in the gulf on a rig I have a old ford ranger book some where I will dig and see if i can find it and see if it has any info in there on the locks oper. Later B.

outlaw · 02-25-2003, 01:48 AM

thanks dropped67step any information u can give me will be a big help, I work for Diamond Offshore Drilling Inc., who does you brother work for, Thanks again
Danny

02-23-2003, 01:38 AM	#1
outlaw Registered User Join Date: Dec 2002 Location: Leesville, Louisiana Posts: 80	door locks I have a question and was hoping that someone might be able to help me out and would greatly apprichiated, I have a 1995 Ford Ranger and I currently can not unlock the doors with the key, there is a plastic clip that goes on the back of the door lock assy. that connects to a metal rod that runs down to the door latch assy. the plastic clip is broken and when I bought the truck the passanger side was already broken so when the drivers side broke I did not have one to compare it to, I don't know of anyone around the house that has one, I tried every way that I could think of to make it work an every way that I tried to hook it up it seemed to be too short. I would apprechiate it greatly if someone could send me a picture a diagram or explain it in great detail of how this aggrivating Son of a _itch hooks up, somebody HHHHHEEEEEELLLLLLLPPPPPPPPP MMMMEEEEE!

02-23-2003, 11:20 AM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	What do you need door locks on a ford WHO"S GUNNA STEAL IT????? __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

02-23-2003, 11:31 PM	#3
chevykid04 4 speed, hurst shiftin Join Date: Jun 2002 Location: Hudson, Wi Posts: 405	break into it, tear the door apart, and get an assembly from your F*rd dealer, and next time, buy chevy... i think that solves all your problems/questions __________________ Shane 1970 Chevy C10

02-24-2003, 07:53 PM	#6
82 Silverado 4X Genuine Chevrolet Join Date: Feb 2003 Location: South West Pennsylvania. Posts: 582	Boy, I wish I could help but I've never seen the inside if a Ranger door. This is "one tight Chevy group" and I see it is really rough on NON-CHEVY questions. Here's some ideas you might look into: Is it possible that the rod doesn't go directly down to the latch?Maybe it toggles off another joint foward of the latch where the mechanism for the inside lock is and the hole in the latch that you are trying to hook into would be for the power lock option. __________________ George 82 Silverado LWB 4x4 350 SM465 NP208 77 Chevrolet Blazer Chalet 400 TH350 NP203

02-24-2003, 01:33 AM	#4
outlaw Registered User Join Date: Dec 2002 Location: Leesville, Louisiana Posts: 80	I bought the part that I need from the dealer but can't figer out how it goes back together due to the fact that both sides are broken, and I do own chevrolets in fact I own 3 of them this just happens to be the only ford that I have and kinda wish I hadn't bought it. I would go look at the picture at the dealer if I was at home but I am on a drilling rig in the middle of the Gulf of Mexico just asking to see if anyone could help if possible. Thanks a Bunch

02-24-2003, 01:38 AM	#5
outlaw Registered User Join Date: Dec 2002 Location: Leesville, Louisiana Posts: 80	there is a plastic clip on the back of the door lock assy. on the inside of the door there is a medal rod that runs down to the door latch assy. I bought the plastic clips already but when I go to hook it all together it seems to be to short and don't know what I am doing wrong in putting it back together can't compare sides since both sides are broken. any help will greatly apprechiated " Danny"

02-25-2003, 01:02 AM	#7
Dropped67step Gearhead since birth Join Date: Jul 2002 Location: Ft. Worth TX. Posts: 190	Hey outlaw what company do you work for my bro is out in the gulf on a rig I have a old ford ranger book some where I will dig and see if i can find it and see if it has any info in there on the locks oper. Later B.

02-25-2003, 01:48 AM	#8
outlaw Registered User Join Date: Dec 2002 Location: Leesville, Louisiana Posts: 80	thanks dropped67step any information u can give me will be a big help, I work for Diamond Offshore Drilling Inc., who does you brother work for, Thanks again Danny



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.