Air Cleaner Intake Hose and Clamps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tucsonjwt · 08-31-2010, 08:14 PM

Where can I get the intake hose that goes from the air cleaner to the front grill opening, along with the appropriate clamps?

*nbpro* · 08-31-2010, 08:36 PM

lmc?

RandyP · 08-31-2010, 08:57 PM

Clamps? Some of them have clamps? Can't say I've seen those intake ducts in the LMC catalog. See them by the dozens in the junk yards though.

The ones I can remember, 84 and up, the duct is just plastic and is sort of a pressure fit on the air cleaner and the piece on the core support.

*nbpro* · 08-31-2010, 09:05 PM

i just looked not in LMC catalog the one we had on ours before we changed air cleaners was like a fold over clamp. If memory serves me right, you can buy the duct hose itself at a local auto parts store, or the junkyards, as Randy suggested.

tucsonjwt · 08-31-2010, 09:44 PM

Local parts stores - nope. Just dumb looks
Local junkyards - nope. All rubber parts missing or fried from AZ heat.
LMC - nope.
Classic Parts - nope.
Rock Auto - nope.

I still have the round plastic sleeve that fits in the core support, and the stock air cleaner, but nothing in between. Any hose like this will not last in AZ heat, so I don't know why they are not a standard replacement part.

*nbpro* · 08-31-2010, 11:04 PM

ebay.?

RandyP · 09-01-2010, 07:55 AM

What year is your truck? I'm looking at the stuff on Mitchell, and it is showing still available from GM actually. This is the pic it gives while viewing for an 87 1/2 ton. #6 ($24.10 list) is your duct from air cleaner to support, and #10 ($9.08 list) is your piece on the support it connects to. #9 is for an 89-91 Suburban/K5 Blazer, 8 and 7 I have never seen on a truck I've owned. There are no "clamps", they just fit together and have nubs that keep them in place. It gives no part numbers, but just the "ORDER FROM DEALER" that I get a lot on the older stuff, but it does not have the dreaded (d) by it which means discontinued.

*nbpro* · 09-01-2010, 10:45 AM

I know fleabay has them, I just didn't post the link, and I have bought those at the local dealership and parts stores. Maybe it's just his area. Seems that you are right about just sliding on top. I was thinking Ford.

tucsonjwt · 09-01-2010, 10:56 AM

Thanks Randy. My truck is an 83 C20, 454. Local dealer just laughs at me - too old a vehicle. Ebay and internet has a lot of hoses, just not my 83/C20 454. As ususal, you can get everything for every square EXCEPT my 83.

*nbpro* · 09-01-2010, 11:10 AM

If it's that hard to find, I would fab one out of dryer vent hose.

RandyP · 09-01-2010, 11:15 AM

The big block is the issue, I bet yours is the "heavy duty" one with more pieces, Mitchell does show those to be all discontinued. I would try to get you some part #'s, but my GM guy is on vacation and I really don't know any of the other parts guys in there. I'll poke around though.

tucsonjwt · 09-01-2010, 11:55 AM

Thanks guys. I would not use dryer vent hose, even painted black. I suspect that the OEM hose has a formed end that attaches to the core support. Just want the right part for the job - everything else is stock.

RandyP · 09-01-2010, 12:34 PM

The standard duty one might fit, just looks like it has extra outlets for some reason, not even sure where they go since I've never owned a big block square. If you were close to me, you could come by and we'd try the standard duct I have that I saved from my 87 1/2 ton. I'd almost bet it would work, but can not be for certain on that.
It shows the air cleaner is the same no matter what motor, so I'd really lean towards it working, and they are available from GM. Just tell them 87 1/2 ton with a 350 and see if they change their mind about it being available or not.

Malo83 · 09-01-2010, 01:49 PM

I'm looking for one also for my 83, this pic is from a couple of years ago, it's in worse shape now so I took it off

Uploaded with ImageShack.us

*nbpro* · 09-01-2010, 02:55 PM

Neither would I use one. It was a suggestion. Temporary fix until you could locate the part. But I did see some on Advance Auto website. The pic I posted above is a 305. It looks similar.

RandyP · 09-01-2010, 03:06 PM

Dug my extra one out, there is a part # on it (no mine is not for sale). Maybe if you run a GM # by them you'll get lucky at a big dealership.

#15538408

*edit*
That is a good part #, it is no longer available from GM, but Vintage Parts (in WI) has a ton of them, so the dealer told me. I google'd them, http://vpartsinc.com/

Maybe the got the one for the 454 as well, I just have no way of getting a part # for it. Might be worth a call though.

*nbpro* · 09-02-2010, 03:59 PM

I'm wrong a lot even if im right, in my ex wife's eyes.

Keith, you da man. I kept forgetting it was a 454

Shawn5488 · 09-30-2010, 10:13 PM

Is there anyway you can get your parts guy to get the big block air cleaner hose part number? Mine is a '85 so no TBI, I know they are different. Thanks!

Sounds like we might be able to get these after all.

Anyone ever used the stock air cleaner to make a dual air snorkel air intake? I have always wanted to make one that was stock looking. I know the a\c compressor will be in the way but I am switching to a serpentine conversion so I should be good to go...

sixshooter798 · 10-01-2010, 12:01 AM

I got this one for $5 at the local junkyard.

D13 · 10-01-2010, 06:31 AM

7 and 8 are diesel silencer parts.

rruss86 · 01-11-2012, 09:37 PM

Small issue.. Vintage parts will not sell to just anyone.... I have to be a retailer..

tucsonjwt · 01-12-2012, 06:29 AM

That must be something new. I bought my air duct from them last year. Just went online with my GM OEM part number and followed the prompts with my credit card - no problem with the order or delivery. AIRC there was a different pricing schedule for dealers vs. retail customers.

kikkegek · 10-09-2012, 03:25 AM

he guys, I finally got my hands on the grille insert and a new hose...hard to get her ein the Netherlands.

But it seems like I need a part to connect the two?

do I? please advise

I still take the air cleaner of regularly, so dont want to duct tape them together... :-)

INSIDIOUS '86 · 10-09-2012, 05:30 AM

Incorrect hose.
Posted via Mobile Device

kikkegek · 10-09-2012, 06:36 AM

Quote:

Originally Posted by INSIDIOUS '86

Incorrect hose.
Posted via Mobile Device

thanks, can you show me the correct version?

08-31-2010, 08:36 PM	#2
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Air Cleaner Intake Hose and Clamps lmc? Last edited by nbpro; 08-31-2010 at 08:39 PM.

08-31-2010, 08:57 PM	#3
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: Air Cleaner Intake Hose and Clamps Clamps? Some of them have clamps? Can't say I've seen those intake ducts in the LMC catalog. See them by the dozens in the junk yards though. The ones I can remember, 84 and up, the duct is just plastic and is sort of a pressure fit on the air cleaner and the piece on the core support. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

08-31-2010, 09:05 PM	#4
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Air Cleaner Intake Hose and Clamps i just looked not in LMC catalog the one we had on ours before we changed air cleaners was like a fold over clamp. If memory serves me right, you can buy the duct hose itself at a local auto parts store, or the junkyards, as Randy suggested.

08-31-2010, 09:44 PM	#5
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,195	Re: Air Cleaner Intake Hose and Clamps Local parts stores - nope. Just dumb looks Local junkyards - nope. All rubber parts missing or fried from AZ heat. LMC - nope. Classic Parts - nope. Rock Auto - nope. I still have the round plastic sleeve that fits in the core support, and the stock air cleaner, but nothing in between. Any hose like this will not last in AZ heat, so I don't know why they are not a standard replacement part.

09-01-2010, 07:55 AM	#7
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: Air Cleaner Intake Hose and Clamps What year is your truck? I'm looking at the stuff on Mitchell, and it is showing still available from GM actually. This is the pic it gives while viewing for an 87 1/2 ton. #6 ($24.10 list) is your duct from air cleaner to support, and #10 ($9.08 list) is your piece on the support it connects to. #9 is for an 89-91 Suburban/K5 Blazer, 8 and 7 I have never seen on a truck I've owned. There are no "clamps", they just fit together and have nubs that keep them in place. It gives no part numbers, but just the "ORDER FROM DEALER" that I get a lot on the older stuff, but it does not have the dreaded (d) by it which means discontinued. Attached Images __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

08-31-2010, 08:14 PM	#1
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,195	Air Cleaner Intake Hose and Clamps Where can I get the intake hose that goes from the air cleaner to the front grill opening, along with the appropriate clamps?

08-31-2010, 11:04 PM	#6
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Air Cleaner Intake Hose and Clamps ebay.? Last edited by nbpro; 08-31-2010 at 11:12 PM.

09-01-2010, 10:45 AM	#8
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Air Cleaner Intake Hose and Clamps I know fleabay has them, I just didn't post the link, and I have bought those at the local dealership and parts stores. Maybe it's just his area. Seems that you are right about just sliding on top. I was thinking Ford. Last edited by nbpro; 09-01-2010 at 11:05 AM.

09-01-2010, 10:56 AM	#9
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,195	Re: Air Cleaner Intake Hose and Clamps Thanks Randy. My truck is an 83 C20, 454. Local dealer just laughs at me - too old a vehicle. Ebay and internet has a lot of hoses, just not my 83/C20 454. As ususal, you can get everything for every square EXCEPT my 83.

09-01-2010, 11:10 AM	#10
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Air Cleaner Intake Hose and Clamps If it's that hard to find, I would fab one out of dryer vent hose.

09-01-2010, 11:15 AM	#11
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: Air Cleaner Intake Hose and Clamps The big block is the issue, I bet yours is the "heavy duty" one with more pieces, Mitchell does show those to be all discontinued. I would try to get you some part #'s, but my GM guy is on vacation and I really don't know any of the other parts guys in there. I'll poke around though. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

09-01-2010, 11:55 AM	#12
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,195	Re: Air Cleaner Intake Hose and Clamps Thanks guys. I would not use dryer vent hose, even painted black. I suspect that the OEM hose has a formed end that attaches to the core support. Just want the right part for the job - everything else is stock.

09-01-2010, 12:34 PM	#13
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: Air Cleaner Intake Hose and Clamps The standard duty one might fit, just looks like it has extra outlets for some reason, not even sure where they go since I've never owned a big block square. If you were close to me, you could come by and we'd try the standard duct I have that I saved from my 87 1/2 ton. I'd almost bet it would work, but can not be for certain on that. It shows the air cleaner is the same no matter what motor, so I'd really lean towards it working, and they are available from GM. Just tell them 87 1/2 ton with a 350 and see if they change their mind about it being available or not. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

09-01-2010, 01:49 PM	#14
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: Air Cleaner Intake Hose and Clamps I'm looking for one also for my 83, this pic is from a couple of years ago, it's in worse shape now so I took it off Uploaded with ImageShack.us

09-01-2010, 02:55 PM	#15
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Air Cleaner Intake Hose and Clamps Neither would I use one. It was a suggestion. Temporary fix until you could locate the part. But I did see some on Advance Auto website. The pic I posted above is a 305. It looks similar.



Register or Log In To remove these advertisements.

09-01-2010, 03:06 PM	#16
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: Air Cleaner Intake Hose and Clamps Dug my extra one out, there is a part # on it (no mine is not for sale). Maybe if you run a GM # by them you'll get lucky at a big dealership. #15538408 edit That is a good part #, it is no longer available from GM, but Vintage Parts (in WI) has a ton of them, so the dealer told me. I google'd them, http://vpartsinc.com/ Maybe the got the one for the 454 as well, I just have no way of getting a part # for it. Might be worth a call though. Attached Images __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools. Last edited by RandyP; 09-01-2010 at 03:17 PM.

09-02-2010, 03:59 PM	#17
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Air Cleaner Intake Hose and Clamps I'm wrong a lot even if im right, in my ex wife's eyes. Keith, you da man. I kept forgetting it was a 454 Last edited by nbpro; 09-02-2010 at 03:59 PM.

09-30-2010, 10:13 PM	#18
Shawn5488 Registered User Join Date: Jul 2010 Location: Central IN Posts: 87	Re: Air Cleaner Intake Hose and Clamps Is there anyway you can get your parts guy to get the big block air cleaner hose part number? Mine is a '85 so no TBI, I know they are different. Thanks! Sounds like we might be able to get these after all. Anyone ever used the stock air cleaner to make a dual air snorkel air intake? I have always wanted to make one that was stock looking. I know the a\c compressor will be in the way but I am switching to a serpentine conversion so I should be good to go...

10-01-2010, 12:01 AM	#19
sixshooter798 Desert Rat Join Date: Jul 2010 Location: Mojave Desert Posts: 169	Re: Air Cleaner Intake Hose and Clamps I got this one for $5 at the local junkyard. Attached Images

10-01-2010, 06:31 AM	#20
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: Air Cleaner Intake Hose and Clamps 7 and 8 are diesel silencer parts. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

01-11-2012, 09:37 PM	#21
rruss86 Registered User Join Date: Feb 2007 Location: California Posts: 12	Re: Air Cleaner Intake Hose and Clamps Small issue.. Vintage parts will not sell to just anyone.... I have to be a retailer..

01-12-2012, 06:29 AM	#22
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,195	Re: Air Cleaner Intake Hose and Clamps That must be something new. I bought my air duct from them last year. Just went online with my GM OEM part number and followed the prompts with my credit card - no problem with the order or delivery. AIRC there was a different pricing schedule for dealers vs. retail customers.

10-09-2012, 03:25 AM	#23
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,520	Re: Air Cleaner Intake Hose and Clamps he guys, I finally got my hands on the grille insert and a new hose...hard to get her ein the Netherlands. But it seems like I need a part to connect the two? do I? please advise I still take the air cleaner of regularly, so dont want to duct tape them together... :-) __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

10-09-2012, 05:30 AM	#24
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Air Cleaner Intake Hose and Clamps Incorrect hose. Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

Register or Log In To remove these advertisements.