|
|
|
10-09-2010, 03:51 PM
|
#1 |
|
Registered User
Join Date: Nov 2009
Location: Noblesville, Indiana
Posts: 430
|
a lowered budget
Hey Guys I have a question on lowering a 66 chevy c10 frame. I have plans to start work on my frame in the winter. My question is this, without cutting the frame and by just using lowering springs back and front. I would like to use at least 18s just how low can I go just by adding springs, Also if any of you have pics pls post them. I was planning on using the original drums 6 lug pattern. and going has low has possible. Thanks Jeff in Indy
Last edited by SRVBLUES64; 10-09-2010 at 04:23 PM. |
|
|
|
10-09-2010, 04:14 PM
|
#2 |
|
Resistance is Futile
Join Date: Dec 2006
Location: Mesa,Arizona
Posts: 3,520
|
Re: a lowered budget
You can bag the truck on 18's with just about no issues as long as your backspacing is correct. My pick-up is lowered 5.5'' in front with 275/40/18's and 5.25'' of bs.
I'm running dropped spindles; you didnt mention if you were doing a disc conversion. If springs are the only method, I think 3'' is just about it. Someone on here had 4'' coils but I have not personally seen them listed anywhere. This is a leaf spring truck with a flip kit; not sure the total rear drop.
__________________
64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device |
|
|
|
|
10-09-2010, 05:15 PM
|
#3 |
|
Registered User
Join Date: Dec 2009
Location: daytona beach fl
Posts: 187
|
Re: a lowered budget
jeep springs in the rear will give u like 3/4 drop
srry no help on the front
__________________
61 step/long bed SBW(SOLD) NEED A NEW PROJECT |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
