What did you get done spooktacular halloween edition 10/31/2010 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 10-31-2010, 06:27 PM

I did nothing truck related, Alot has been going on in the family and ive not had the time do anything... I did take a night to go to a halloween party last night and other than that its been all work and no play
heres a pic of my granddaughter this halloween
How about you all???

Manbearpig · 10-31-2010, 06:58 PM

Pulled off a cracked oil pan and awaiting a new one

nxtlevl · 10-31-2010, 07:02 PM

Nothing too exciting......Did some work on the interior...rewired a new tach..hooked some speakers back up ...got the new tires mounted on the rallies Friday...fixed the wiring on my side marker lights.....

85burb · 10-31-2010, 07:10 PM

Went to zoo with my little girl and wife for trick or treating. Finalized carb install and painted front cover and vally cover for engine i am building.

**PRattenbury** · 10-31-2010, 07:15 PM

Worked on the Cummins some. Gotta get it woke up before the 307 in the Chebby goes bang.

Manbearpig · 10-31-2010, 07:25 PM

Quote:

Originally Posted by old Rusty C10

I did nothing truck related, Alot has been going on in the family and ive not had the time do anything... I did take a night to go to a halloween party last night and other than that its been all work and no play
heres a pic of my granddaughter this halloween
How about you all???

I just noticed you were signed up over on AllOffTopic

Buick455 · 10-31-2010, 07:27 PM

Disassembled my 3/4 ton rear springs and pressed the bushings out which is always a fun job and messy when you get liquid rubber all over everything. Cleaned the shop today and changed the trans and engine filter and oil on my Daughters 2002 impala.

S10Fan · 10-31-2010, 07:37 PM

Took a 5 1/2 hour drive down to Charlotte NC Friday for the GoodGuys show. Our hobby is alive and well and the talent pool continues to grow. I arrived at 10:30 AM Friday and headed home at 2:30 Saturday afternoon. There's no way you're going to see everything in that short time span. I did manage to grab a couple hundred pictures............

http://s430.photobucket.com/albums/q...uys2010Friday/

http://s430.photobucket.com/albums/q...s2010Saturday/

Picked up a few items for my next project. I also met Tony from RideTech, Tony is a fellow board member, great guy. Getting to clock 700 miles on the Heap was a blast!

**N2TRUX** · 10-31-2010, 07:38 PM

Saturday I went to a buddies house (Subtle71) and helped him lower his truck. He and a a couple friends had already lowered the rear earlier in the week so all that was left was the front.

Today I picked up a few more parts from the guy that I bought all the goodies from last week. Still have more to look at next week, but I may have some 73-80 sheet metal coming available.

This afternoon I finally worked on my E3 system again. I discoverd I had a broken ride height sensor, so I pulled them all off to inspect and start fresh/

1BadSS · 10-31-2010, 07:46 PM

Cleaned up the garage and got the truck in it. With inches to spare length wise!

jgknowla1 · 10-31-2010, 09:22 PM

Replaced my automatic choke (nonfunctional) with a manual kit. Seems to work really well now.

munice · 10-31-2010, 09:34 PM

Finally swapped in the new front axle, with new leafs etc. went pretty smooth. hope to get the rear done next weekend. (5 days of riding with 16s up front and 15s out back

) ...sure looks silly but I got to get to work right?

pics:

electrician42 · 10-31-2010, 10:00 PM

worked in garage some getting ready to seperate the body from the frame on my 82... started hooking up my new comopressor from tractor supply

lilpoindexter · 10-31-2010, 10:17 PM

I bought a nice condition '94 silverado bench seat and replaced the smelly, original, junk seat in my 1978 C10...hells yeah...no more busted springs poking me in the butt.

Justins76 · 10-31-2010, 10:33 PM

Put on some rear bumper reverse H3 lights. 130 watts a side

RuralRoute C-30 · 10-31-2010, 10:54 PM

Saw the truck twice this week-end but more busy with family than shop time this week-end.

Primary caretaker of wife this week-end as she now is home recovering from major surgery on Thursday. To allow her to rest as needed went into Mr Mom mode as I care for our 6 year old son as well on this Halloween week-end along with a lot of domestic chores for a change. The wife smiles quietly even in her discomfort as she watches mine.

Began work on making the list of parts for the next phase of truck improvements; engine bay clean-up with a 'few' improvements to the engine soon. Taking time to begin reading my new oem service manual.

"Just another day in Paradise..."

Mark

flamingbig10 · 10-31-2010, 11:15 PM

finally painted my frame, Painted the top of the frame yesterday and painted the underside of the frame Today, but had a little accident while I was cleaning up the spray gun the wind caught the jack stands and pushed the frame forward to the ground. Then scared the older trick or treaters

centexan · 10-31-2010, 11:35 PM

Went and picked up a good top for my '74 Jimmy and found out the guy had some new floor pans that I'm probably going to pick up too. Got it set on and back in the garage.

SuperNova22 · 10-31-2010, 11:55 PM

Found a ground wire issue behind the cluster, causing some light issues. Reinstalled the go pedal assembly and the e-brake assembly. Fixed a power steering leak. Plumbed in the new heater core that has been bypassed for years. Installed new belts. Reinstalled the windshield wiper motor and hooked up the linkage. Started to draw out the plans for the custom sub woofer box for behind the seat. And finished it all up with a thorough wash and wax job!!

red rumbler · 11-01-2010, 12:00 AM

put the truck in storage

and carved a sick shark in a pumpkin haha

68GMCCustom · 10-31-2010, 11:48 PM

got my rear sway bar and panhard bar (had to cut rivets/drill mount hole/install new frame mount) all mounted. I also set the cab back on the chassis.

*nbpro* · 10-31-2010, 11:49 PM

worked on getting the front bumper smooth. fixed some spots where some dipsh*t came through the parking lot slinging mud and gravel. spent time with the family Name: HPIM0573.jpg
Views: 256
Size: 45.2 KB

Name: HPIM0573.jpg
Views: 256
Size: 45.2 KB

Name: HPIM0586.jpg
Views: 257
Size: 47.0 KB

mongoose · 10-31-2010, 11:55 PM

got it on down on all fours, the front looks killer, but the back can come down another inch and the wheels out an inch i'm thinking.. Anyone know the best place to get adapter/spacers from?

also put in my line loc, and all new stainless front lines, and a stainless flex line for the back as well, made up my seat bracket so i can mount my imprezza seats, i think that's it...

D13 · 11-01-2010, 06:16 AM

Got the barn ready for the next 16' of pallet racking. Done until the next 10 yards of stone shows up. Mowed the back lawn, moved some steps around, started setting up my WMO processor for using WMO in my 6.2 diesel, changed the fuel filters and oil on my tractor. Next i'm going to design some engine racks so I can et all my powertrains on the pallet racking. That should be fun.

firenuttz · 11-01-2010, 09:31 AM

it was my last full day home (i leave for boot camp today) so my uncles and grandpa came out and we took my 62 out to the street and destroyed my 295 50s on it and left more rubber on the street than on the tires then we all got onto my drag cart and had a good old time tearin up the dirt road in front of my house

here is a pic of my cart with my uncle tito on it im the one standing behind him

10-31-2010, 06:27 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	What did you get done spooktacular halloween edition 10/31/2010 I did nothing truck related, Alot has been going on in the family and ive not had the time do anything... I did take a night to go to a halloween party last night and other than that its been all work and no play heres a pic of my granddaughter this halloween How about you all??? Attached Images __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! Last edited by old Rusty C10; 10-31-2010 at 07:09 PM.

10-31-2010, 06:58 PM	#2
Manbearpig Registered User Join Date: Mar 2009 Location: Midland, Tx Posts: 418	Re: What did you get done spooktacular halloween edition 10/31/2010 Pulled off a cracked oil pan and awaiting a new one __________________ 1972 GMC C10

10-31-2010, 07:02 PM	#3
nxtlevl Registered User Join Date: Oct 2010 Location: Hutchinson KS Posts: 91	Re: What did you get done spooktacular halloween edition 10/31/2010 Nothing too exciting......Did some work on the interior...rewired a new tach..hooked some speakers back up ...got the new tires mounted on the rallies Friday...fixed the wiring on my side marker lights.....

10-31-2010, 07:10 PM	#4
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: What did you get done spooktacular halloween edition 10/31/2010 Went to zoo with my little girl and wife for trick or treating. Finalized carb install and painted front cover and vally cover for engine i am building. Attached Images __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

10-31-2010, 07:15 PM	#5
PRattenbury Senior Member Join Date: Feb 2010 Location: Maumelle, AR Posts: 478	Re: What did you get done spooktacular halloween edition 10/31/2010 Worked on the Cummins some. Gotta get it woke up before the 307 in the Chebby goes bang.

10-31-2010, 07:27 PM	#7
Buick455 Registered User Join Date: Mar 2010 Location: Amherst VA Posts: 150	Re: What did you get done spooktacular halloween edition 10/31/2010 Disassembled my 3/4 ton rear springs and pressed the bushings out which is always a fun job and messy when you get liquid rubber all over everything. Cleaned the shop today and changed the trans and engine filter and oil on my Daughters 2002 impala.

10-31-2010, 07:37 PM	#8
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: What did you get done spooktacular halloween edition 10/31/2010 Took a 5 1/2 hour drive down to Charlotte NC Friday for the GoodGuys show. Our hobby is alive and well and the talent pool continues to grow. I arrived at 10:30 AM Friday and headed home at 2:30 Saturday afternoon. There's no way you're going to see everything in that short time span. I did manage to grab a couple hundred pictures............ http://s430.photobucket.com/albums/q...uys2010Friday/ http://s430.photobucket.com/albums/q...s2010Saturday/ Picked up a few items for my next project. I also met Tony from RideTech, Tony is a fellow board member, great guy. Getting to clock 700 miles on the Heap was a blast! __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

10-31-2010, 07:38 PM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: What did you get done spooktacular halloween edition 10/31/2010 Saturday I went to a buddies house (Subtle71) and helped him lower his truck. He and a a couple friends had already lowered the rear earlier in the week so all that was left was the front. Today I picked up a few more parts from the guy that I bought all the goodies from last week. Still have more to look at next week, but I may have some 73-80 sheet metal coming available. This afternoon I finally worked on my E3 system again. I discoverd I had a broken ride height sensor, so I pulled them all off to inspect and start fresh/ Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

10-31-2010, 07:46 PM	#10
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: What did you get done spooktacular halloween edition 10/31/2010 Cleaned up the garage and got the truck in it. With inches to spare length wise! __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

10-31-2010, 09:22 PM	#11
jgknowla1 Registered User Join Date: Mar 2010 Location: Cary, NC Posts: 48	Re: What did you get done spooktacular halloween edition 10/31/2010 Replaced my automatic choke (nonfunctional) with a manual kit. Seems to work really well now.

10-31-2010, 09:34 PM	#12
munice regular everyday normal guy Join Date: Aug 2009 Location: SW Ontario, Canada Posts: 125	Re: What did you get done spooktacular halloween edition 10/31/2010 Finally swapped in the new front axle, with new leafs etc. went pretty smooth. hope to get the rear done next weekend. (5 days of riding with 16s up front and 15s out back ) ...sure looks silly but I got to get to work right? pics: __________________ -Andrew- 1987 Chevrolet V10 SM465 NP208 w/ '89 454 dual plane hi-rise 750cfm 1407 w/ '86 10b /14b new motor on the way: GM#990 heads 25cc speed pro pistons COMP XE 274h crane gold rollers

10-31-2010, 10:00 PM	#13
electrician42 Registered User Join Date: Dec 2009 Location: varney,ky Posts: 53	Re: What did you get done spooktacular halloween edition 10/31/2010 worked in garage some getting ready to seperate the body from the frame on my 82... started hooking up my new comopressor from tractor supply __________________ 2011 silverado 2500hd ext. cab 6.0 2007 tahoe lt 2004 harley-davidson superglide 1982 chevrolet c10 stepside 2 wheeldrive..current project

10-31-2010, 10:17 PM	#14
lilpoindexter Registered User Join Date: Sep 2010 Location: los angeles Posts: 1,134	Re: What did you get done spooktacular halloween edition 10/31/2010 I bought a nice condition '94 silverado bench seat and replaced the smelly, original, junk seat in my 1978 C10...hells yeah...no more busted springs poking me in the butt. Last edited by lilpoindexter; 10-31-2010 at 10:17 PM.

10-31-2010, 10:33 PM	#15
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	Re: What did you get done spooktacular halloween edition 10/31/2010 Put on some rear bumper reverse H3 lights. 130 watts a side __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!

10-31-2010, 10:54 PM	#16
RuralRoute C-30 Registered User Join Date: Jan 2010 Location: East Central Illinois Posts: 511	Re: What did you get done spooktacular halloween edition 10/31/2010 Saw the truck twice this week-end but more busy with family than shop time this week-end. Primary caretaker of wife this week-end as she now is home recovering from major surgery on Thursday. To allow her to rest as needed went into Mr Mom mode as I care for our 6 year old son as well on this Halloween week-end along with a lot of domestic chores for a change. The wife smiles quietly even in her discomfort as she watches mine. Began work on making the list of parts for the next phase of truck improvements; engine bay clean-up with a 'few' improvements to the engine soon. Taking time to begin reading my new oem service manual. "Just another day in Paradise..." Mark __________________ 1985 Chevy C-30 Hydraulic Dump Bed 2001 Saturn SC2 (go to work car) 2010 PT Cruiser (wife's car) "Reality is just a hallucination brought on by lack of alcohol."



Register or Log In To remove these advertisements.

10-31-2010, 11:15 PM	#17
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: What did you get done spooktacular halloween edition 10/31/2010 finally painted my frame, Painted the top of the frame yesterday and painted the underside of the frame Today, but had a little accident while I was cleaning up the spray gun the wind caught the jack stands and pushed the frame forward to the ground. Then scared the older trick or treaters __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

10-31-2010, 11:35 PM	#18
centexan Registered User Join Date: Aug 2006 Location: Austin, Texas Posts: 167	Re: What did you get done spooktacular halloween edition 10/31/2010 Went and picked up a good top for my '74 Jimmy and found out the guy had some new floor pans that I'm probably going to pick up too. Got it set on and back in the garage. __________________ 1989 Chevy Suburban v1500

10-31-2010, 11:55 PM	#19
SuperNova22 Registered User Join Date: Mar 2008 Location: Hollister, Ca Posts: 53	Re: What did you get done spooktacular halloween edition 10/31/2010 Found a ground wire issue behind the cluster, causing some light issues. Reinstalled the go pedal assembly and the e-brake assembly. Fixed a power steering leak. Plumbed in the new heater core that has been bypassed for years. Installed new belts. Reinstalled the windshield wiper motor and hooked up the linkage. Started to draw out the plans for the custom sub woofer box for behind the seat. And finished it all up with a thorough wash and wax job!!

11-01-2010, 12:00 AM	#20
red rumbler Registered User Join Date: Oct 2009 Location: stouffville ontario Posts: 166	Re: What did you get done spooktacular halloween edition 10/31/2010 put the truck in storage and carved a sick shark in a pumpkin haha Attached Images

10-31-2010, 11:48 PM	#21
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: What did you get done spooktacular halloween edition 10/31/2010 got my rear sway bar and panhard bar (had to cut rivets/drill mount hole/install new frame mount) all mounted. I also set the cab back on the chassis. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-31-2010, 11:49 PM	#22
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: What did you get done spooktacular halloween edition 10/31/2010 worked on getting the front bumper smooth. fixed some spots where some dipsht came through the parking lot slinging mud and gravel. spent time with the family Last edited by nbpro; 10-31-2010 at 11:58 PM.*

10-31-2010, 11:55 PM	#23
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	Re: What did you get done spooktacular halloween edition 10/31/2010 got it on down on all fours, the front looks killer, but the back can come down another inch and the wheels out an inch i'm thinking.. Anyone know the best place to get adapter/spacers from? also put in my line loc, and all new stainless front lines, and a stainless flex line for the back as well, made up my seat bracket so i can mount my imprezza seats, i think that's it... __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler.

11-01-2010, 06:16 AM	#24
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: What did you get done spooktacular halloween edition 10/31/2010 Got the barn ready for the next 16' of pallet racking. Done until the next 10 yards of stone shows up. Mowed the back lawn, moved some steps around, started setting up my WMO processor for using WMO in my 6.2 diesel, changed the fuel filters and oil on my tractor. Next i'm going to design some engine racks so I can et all my powertrains on the pallet racking. That should be fun. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

11-01-2010, 09:31 AM	#25
firenuttz 2lo4me/ntlonuf/ntfstnf Join Date: Aug 2010 Location: Newport News, VA Posts: 239	Re: What did you get done spooktacular halloween edition 10/31/2010 it was my last full day home (i leave for boot camp today) so my uncles and grandpa came out and we took my 62 out to the street and destroyed my 295 50s on it and left more rubber on the street than on the tires then we all got onto my drag cart and had a good old time tearin up the dirt road in front of my house here is a pic of my cart with my uncle tito on it im the one standing behind him Attached Images __________________ 62 GMC swb fleetside~ project: still undecided 84 Chevy 4wd crew cab 8 inch lift and 37" goodyear h1 pulloffs, still rockin the old mans former plate 2LO4ME 65 chevy 1 ton panel~ bagged/bodied duramax plans slowly in progress... 02 Silverado cclb duramax~ sas'd "bro" truck with more rust than imagineable...

Register or Log In To remove these advertisements.